|
|
正常启动信息如下:
CFE version 1.0.37 for BCM947XX (32bit,SP,LE)
Build Date: Wed Jul 1 18:27:45 CST 2009 (zhaoyanming@wireless.gj.com)
Copyright (C) 2000,2001,2002,2003 Broadcom Corporation.
Initializing Arena
Initializing Devices.
et0: Broadcom BCM47xx 10/100 Mbps Ethernet Controller 4.150.19.0
CPU type 0x29029: 240MHz
Total memory: 32768 KBytes
Total memory used by CFE: 0x80700000 - 0x80797DC0 (622016)
Initialized Data: 0x8072EDE0 - 0x80731540 (10080)
BSS Area: 0x80731540 - 0x80731DC0 (2176)
Local Heap: 0x80731DC0 - 0x80795DC0 (409600)
Stack Area: 0x80795DC0 - 0x80797DC0 (8192)
Text (code) segment: 0x80700000 - 0x8072EDE0 (191968)
Boot area (physical): 0x00798000 - 0x007D8000
Relocation Factor: I:00000000 - D:00000000
Device eth0: hwaddr 00-90-4C-C0-04-51, ipaddr 192.168.1.1, mask 255.255.255.0
gateway not set, nameserver not set
Loader:raw Filesys:tftp Dev:eth0 File:: Options null)
Loading: Failed.
Could not load :: Timeout occured
Loader:raw Filesys:raw Dev:flash0.os File: Options null)
Loading: .... 1781760 bytes read
Entry at 0x80001000
Closing network.
Starting program at 0x80001000到这里就停止了
Decompressing..........done
然后开机过程按CTRL+C停止:
CFE version 1.0.37 for BCM947XX (32bit,SP,LE)
Build Date: Wed Jul 1 18:27:45 CST 2009 (zhaoyanming@wireless.gj.com)
Copyright (C) 2000,2001,2002,2003 Broadcom Corporation.
Initializing Arena
Initializing Devices.
et0: Broadcom BCM47xx 10/100 Mbps Ethernet Controller 4.150.19.0
CPU type 0x29029: 240MHz
Total memory: 32768 KBytes
Total memory used by CFE: 0x80700000 - 0x80797DC0 (622016)
Initialized Data: 0x8072EDE0 - 0x80731540 (10080)
BSS Area: 0x80731540 - 0x80731DC0 (2176)
Local Heap: 0x80731DC0 - 0x80795DC0 (409600)
Stack Area: 0x80795DC0 - 0x80797DC0 (8192)
Text (code) segment: 0x80700000 - 0x8072EDE0 (191968)
Boot area (physical): 0x00798000 - 0x007D8000
Relocation Factor: I:00000000 - D:00000000
Device eth0: hwaddr 00-90-4C-C0-04-51, ipaddr 192.168.1.1, mask 255.255.255.0
gateway not set, nameserver not set
Loader:raw Filesys:tftp Dev:eth0 File:: Options null)
Loading: Failed.
Could not load :: Interrupted
CFE> help
Available commands:
et Broadcom Ethernet utility.
backupnvram NVRAM utility.
nvram NVRAM utility.
reboot Reboot.
flash Update a flash memory device
batch Load a batch file into memory and execute it
go Verify and boot OS image.
boot Load an executable file into memory and execute it
load Load an executable file into memory without executing it
save Save a region of memory to a remote file via TFTP
ping Ping a remote IP host.
arp Display or modify the ARP Table
ifconfig Configure the Ethernet interface
help Obtain help for CFE commands
For more information about a command, enter 'help command-name'
*** command status = 0
CFE> reboot
Decompressing..........done
求大侠帮忙看看谢谢啦
|
本帖子中包含更多资源
您需要 登录 才可以下载或查看,没有账号?立即注册
×
|