e3200 ttl的焊接后,连接电脑失败,求救

fantasy***

本帖最后由 fantasy19830306 于 2013-8-29 14:55 编辑

也没办法输入
具体信息如下:

CFE version 1.0.37 for BCM947XX (32bit,SP,LE)
Build Date: Thu Apr 21 02:03:27 HKT 2011 (zhaoguang@sw1)
Copyright (C) 2000-2008 Broadcom Corporation.

Init Arena
Init Devs.
This is a Serial Flash
Boot partition size = 262144(0x40000)
Found a 16MB ST compatible serial flash
et0: Broadcom BCM47XX 10/100/1000 Mbps Ethernet Controller 5.60.127.2901 @VERSION_TYPE@
CPU type 0x19749: 500MHz
Tot mem: 65536 KBytes

CFE mem: 0x80700000 - 0x807A0440 (656448)
Data:    0x80735750 - 0x80739790 (16448)
BSS:       0x80739790 - 0x8073A440 (3248)
Heap:    0x8073A440 - 0x8079E440 (409600)
Stack:    0x8079E440 - 0x807A0440 (8192)
Text:    0x80700000 - 0x80735744 (218948)

Boot version: v5.10
The boot is CFE

Flash base: bfc00000, mac start: 3ef00
mac_init(): Find mac [C87:199:EE:51] in location 0
Nothing...
country_init(): Find country code in location 0
The country is same

### CLKDIV= 0x80e0842, SFlashClkDiv=8 clkdivsf=2 ###

### Change it to 0x20e0842 (2) ###
Device eth0:  hwaddr C8-D7-19-D9-EE-51, ipaddr 192.168.1.1, mask 255.255.255.0
      gateway not set, nameserver not set
cfe_led_init: start to set power LED and switch LEDs.
Loader:raw Filesys:tftp Dev:eth0 File:: Optionsnull)
Loading: Failed.
Could not load :: Timeout occured
Loader:raw Filesys:raw Dev:flash0.os File: Optionsnull)
Loading: .. 5192 bytes read
Entry at 0x80001000
Closing network.
Starting program at 0x80001000