最近研究HG8110光纤猫的一点心得。附加一点疑问。

guos***

用telecomadmin/admintelecom进去管理页面，下载了配置文件hw_ctree.xml，打开找到了下面一段代码，目前状态是光猫WAN中已经新建连接，输入了正确的VLAN ID和上网帐号密码，能从ISP得到IP地址，在光猫里ping DNS是通的，但是lan口接上电脑不能获得IP地址，web管理页面中没有LAN的配置，所以我猜要想让LAN口的电脑不用拨号就能正常上网，必须得修改配置文件。
辣么问题来了，怎么改下面的代码才能让LAN口的电脑上网？？？？？
<LANHostConfigManagement DHCPServerConfigurable="1" DHCPServerEnable="1" DHCPRelay="0" DHCPLeaseTime="259200" PasstThroughLease="" PassthroughLease="" MinAddress="192.168.100.2" MaxAddress="192.168.100.254" SubnetMask="255.255.255.0" DNSServers="" DomainName="" IPRouters="" ReservedAddresses="" UseAllocatedWan="" AssociatedConnection="" PassthroughMACAddress="" AllowedMACAddresses="" X_HW_DHCPL2RelayEnable="1" X_HW_HGWStart="" X_HW_HGWEnd="" X_HW_STBStart="" X_HW_STBEnd="" X_HW_CameraStart="" X_HW_CameraEnd="" X_HW_ComputerStart="" X_HW_ComputerEnd="" X_HW_PhoneStart="" X_HW_PhoneEnd="" X_HW_DHCPOption82Enable="0" X_HW_PPPoEPITPEnable="0">
<IPInterface NumberOfInstances="2">
<IPInterfaceInstance InstanceID="1" Enable="1" IPInterfaceIPAddress="192.168.100.1" IPInterfaceSubnetMask="255.255.255.0" IPInterfaceAddressingType="DHCP"/>
<IPInterfaceInstance InstanceID="2" Enable="1" IPInterfaceIPAddress="192.168.2.1" IPInterfaceSubnetMask="255.255.255.0" IPInterfaceAddressingType="DHCP"/>
</IPInterface>
</LANHostConfigManagement>
<LANEthernetInterfaceConfig NumberOfInstances="1">
<LANEthernetInterfaceConfigInstance InstanceID="1" Enable="" Status="" Name="eth0:1" MACAddress="" MACAddressControlEnabled="0" MaxBitRate="" DuplexMode="" X_HW_L3Enable="0">
<Stats BytesSent="" BytesReceived="" PacketsSent="" PacketsReceived="" ErrorsSent="" ErrorsReceived="" UnicastPacketsSent="" UnicastPacketsReceived="" DiscardPacketsSent="" DiscardPacketsReceived="" MulticastPacketsSent="" MulticastPacketsReceived="" BroadcastPacketsSent="" BroadcastPacketsReceived="" UnknownProtoPacketsReceived=""/>
</LANEthernetInterfaceConfigInstance>
</LANEthernetInterfaceConfig>
</LANDeviceInstance>
</LANDevice>




悄悄告诉你，我们这边联通光猫只要制式正确，LOID正确注册就能用，没啥限制条件哦~
楼猪想如果hg8110研究不顺，就在某宝弄个HG8245破解掉换上，挖哈哈！
话说如果让HG8245一人全包火力全开，辣么楼主家正在工作的网件6300V2版大电磁炉该怎么办呢？楼猪的如意云该怎么办呢？楼猪的各种型号10多个路由器该怎么办呢？总不能一直呆在角落吃灰吧。

guos***

期望有内行指点一下。不胜感激。

touc***

guoshanji 发表于 2014-10-30 11:34
期望有内行指点一下。不胜感激。

我家开了两个户，机子的配置都是远程的，然后就是其中一个是网桥模式（需要无线路由器拨号上面），还有一个是路由器模式。简单的办法就是打电话要求更改，不然使用root登陆网页管理页面也是可以更改的。