求救 wrt150n刷机后不能启动电源灯一直闪 附ttl启动代码 大神看看啊

lang46***

ttl启动代码：
CODE Pattern is INCORRECT! (N150)
Failed.: Error
Start to blink diag led ...
Check CRC of image1
  Len:     0xEA400      (959488)        (0xBC040000)
  Offset0: 0x74736574           (1953719668)            (0x30776574)
  Offset1: 0x74736574   (1953719668)    (0x30776574)
  Offset2: 0xEA400      (959488)        (0xBC12A400)
  Header CRC:    0x15ED98DB
  Calculate CRC: 0x4FC75DFD
Boot program checksum is invalid
CMD: [flash -ctheader : flash1.trx]
Reading :: _tftpd_open(): retries=0/3
_tftpd_open(): retries=1/3










Start to blink diag led ...


CFE version 1.0.37 for BCM947XX (32bit,SP,LE)
Build Date: Mon Apr 16 16:20:50 CST 2007 (root@localhost.localdomain)
Copyright (C) 2000,2001,2002,2003 Broadcom Corporation.

Initializing Arena
Initializing Devices.

No DPN
This is a Parallel Flash
Partition information:
boot    #00   00000000 -> 0003FFFF  (262144)
trx     #01   00040000 -> 0004001B  (28)
os      #02   0004001C -> 003F7FFF  (3899364)
nvram   #03   003F8000 -> 003FFFFF  (32768)
Partition information:
boot    #00   00000000 -> 0003FFFF  (262144)
trx     #01   00040000 -> 003F7FFF  (3899392)
nvram   #02   003F8000 -> 003FFFFF  (32768)
et0: Broadcom BCM47xx 10/100 Mbps Ethernet Controller 4.100.27.0
et1: Broadcom BCM47xx 10/100 Mbps Ethernet Controller 4.100.27.0
CPU type 0x29006: 264MHz
Total memory: 16384 KBytes

Total memory used by CFE:  0x80600000 - 0x806A1140 (659776)
Initialized Data:          0x80637F30 - 0x8063A750 (10272)
BSS Area:                  0x8063A750 - 0x8063B140 (2544)
Local Heap:                0x8063B140 - 0x8069F140 (409600)
Stack Area:                0x8069F140 - 0x806A1140 (8192)
Text (code) segment:       0x80600000 - 0x80637F30 (229168)
Boot area (physical):      0x006A2000 - 0x006E2000
Relocation Factor:         I:00000000 - D:00000000

Boot version: v4.3
The boot is CFE
mac_init(): Find mac [00:1d:7e:3c:39:21] in location 1
Nothing...
CMD: [ifconfig eth0 -addr=192.168.1.1 -mask=255.255.255.0]
Device eth0:  hwaddr 00-1D-7E-3C-39-21, ipaddr 192.168.1.1, mask 255.255.255.0
        gateway not set, nameserver not set
CMD: [go;]
Check CRC of image1
  Len:     0xEA400      (959488)        (0xBC040000)
  Offset0: 0x74736574           (1953719668)            (0x30776574)
  Offset1: 0x74736574   (1953719668)    (0x30776574)
  Offset2: 0xEA400      (959488)        (0xBC12A400)
  Header CRC:    0x15ED98DB
  Calculate CRC: 0x4FC75DFD
Boot program checksum is invalid
CMD: [flash -ctheader : flash1.trx]
Reading :: _tftpd_open(): retries=0/3
_tftpd_open(): retries=1/3
_tftpd_open(): retries=2/3

Failed.: Timeout occured
CMD: [flash -ctheader : flash1.trx]
Reading :: _tftpd_open(): retries=0/3
_tftpd_open(): retries=1/3
_tftpd_open(): retries=2/3
Failed.: Timeout occured
CMD: [flash -ctheader : flash1.trx]
Reading :: _tftpd_open(): retries=0/3
_tftpd_open(): retries=1/3
_tftpd_open(): retries=2/3
Failed.: Timeout occured
CMD: [flash -ctheader : flash1.trx]
Reading :: _tftpd_open(): retries=0/3
_tftpd_open(): retries=1/3
_tftpd_open(): retries=2/3
Failed.: Timeout occured
CMD: [flash -ctheader : flash1.trx]
Reading :: _tftpd_open(): retries=0/3
是不是已经救不活了啊
刷的openwrt 刷的时候固件选错了