关于7231-4P挂硬盘的问题~

g_bigshow

小弟新手一名，冲着7231-4P能脱机BT，于是前段时间买了一台~
固件: DD-WRT v24 (05/20/08) mini

这两天都在研究《  belkin7231-4p潜力挖掘教程1-挂U盘》跟着教程一步步做，但是就是不能正确识别硬盘的容量。
教程中说要放一个USB驱动进JFFS2文件夹，我跟着做，结果不能识别容量~
此时我想，于我的DD版本已经带有USB驱动，就不用那个驱动，直接在“诊断”处输入重新指定JFFS2的命令，也不能~

一下是我的DMESG




usb.c: registered new driver usbdevfs
usb.c: registered new driver hub
usb-uhci.c: $Revision: 1.275 $ time 06:20:44 May 20 2008
usb-uhci.c: High bandwidth mode enabled
PCI: Setting latency timer of device 00:03.0 to 64
usb-uhci.c: v1.275:USB Universal Host Controller Interface driver
PCI: Setting latency timer of device 00:04.0 to 64
usb-ohci.c: USB OHCI at membase 0xb8004000, IRQ 2
usb-ohci.c: usb-00:04.0, PCI device 14e4:4716
usb.c: new USB bus registered, assigned bus number 1
hub.c: USB hub found
hub.c: 2 ports detected
SCSI subsystem driver Revision: 1.00
Initializing USB Mass Storage driver...
usb.c: registered new driver usb-storage
USB Mass Storage support registered.
hub.c: new USB device 00:04.0-2, assigned address 2
usb.c: USB device not accepting new address=2 (error=-145)
hub.c: new USB device 00:04.0-2, assigned address 3
usb.c: USB device not accepting new address=3 (error=-145)
Journalled Block Device driver loaded
usb.c: registered new driver usblp
printer.c: v0.13: USB Printer Device Class driver
JFFS2 version 2.1. (C) 2001 Red Hat, Inc., designed by Axis Communications AB.
vlan0: add 01:00:5e:00:00:01 mcast address to master interface
vlan0: dev_set_promiscuity(master, 1)
device eth0 entered promiscuous mode
device vlan0 entered promiscuous mode
HELP ME! qdisc_restart called, but no Qdisc!
device eth1 entered promiscuous mode
device vlan1 entered promiscuous mode
vlan1: Setting MAC address to  00 01 e3 0e 95 c5.
vlan1: dev_set_promiscuity(master, 1)
vlan1: dev_set_allmulti(master, 1)
vlan1: dev_set_promiscuity(master, -1)
device vlan1 left promiscuous mode
vlan1: dev_set_allmulti(master, -1)
vlan0: dev_set_promiscuity(master, -1)
device eth0 left promiscuous mode
device vlan0 left promiscuous mode
device eth1 left promiscuous mode
vlan0: dev_set_promiscuity(master, 1)
device eth0 entered promiscuous mode
device vlan0 entered promiscuous mode
device eth1 entered promiscuous mode
vlan1: dev_set_allmulti(master, 1)
vlan1: dev_set_promiscuity(master, 1)
device vlan1 entered promiscuous mode
vlan1: dev_set_promiscuity(master, -1)
device vlan1 left promiscuous mode
vlan1: dev_set_allmulti(master, -1)
FAT: bogus logical sector size 65508
vlan0: dev_set_promiscuity(master, -1)
device eth0 left promiscuous mode
device vlan0 left promiscuous mode
device eth1 left promiscuous mode
vlan0: dev_set_promiscuity(master, 1)
device eth0 entered promiscuous mode
device vlan0 entered promiscuous mode
device eth1 entered promiscuous mode
vlan1: dev_set_allmulti(master, 1)
vlan1: dev_set_promiscuity(master, 1)
device vlan1 entered promiscuous mode
vlan1: dev_set_promiscuity(master, -1)
device vlan1 left promiscuous mode
vlan1: dev_set_allmulti(master, -1)
FAT: bogus logical sector size 65508
root@BIGSHOW:~# dmesg
CPU revision is: 00029007
Linux version 2.4.35 (eko@dd-wrt) (gcc version 3.4.4 (OpenWrt-2.0)) #1951 Tue Ma
y 20 06:25:35 CEST 2008
Determined physical RAM map:
memory: 01000000 @ 00000000 (usable)
On node 0 totalpages: 4096
zone(0): 4096 pages.
zone(1): 0 pages.
zone(2): 0 pages.
Kernel command line: root=/dev/mtdblock2 rootfstype=squashfs,jffs2 noinitrd cons
ole=ttyS0,115200
CPU: BCM4712 rev 1 at 200 MHz
Using 100.000 MHz high precision timer.
Calibrating delay loop... 199.47 BogoMIPS
Dentry cache hash table entries: 2048 (order: 2, 16384 bytes)
Inode cache hash table entries: 1024 (order: 1, 8192 bytes)
Mount cache hash table entries: 512 (order: 0, 4096 bytes)
Buffer cache hash table entries: 1024 (order: 0, 4096 bytes)
Page-cache hash table entries: 4096 (order: 2, 16384 bytes)
Checking for 'wait' instruction...  unavailable.
POSIX conformance testing by UNIFIX
PCI: Fixing up bus 0
PCI: Fixing up bridge
PCI: Setting latency timer of device 01:00.0 to 64
PCI: Fixing up bus 1
Initializing RT netlink socket
Starting kswapd
devfs: v1.12c (20020818) Richard Gooch (rgooch@atnf.csiro.au)
devfs: boot_options: 0x1
squashfs: version 3.0 (2006/03/15) Phillip Lougher
pty: 256 Unix98 ptys configured
Serial driver version 5.05c (2001-07-08) with MANY_PORTS SHARE_IRQ SERIAL_PCI en
abled
ttyS00 at 0xb8000300 (irq = 3) is a 16550A
ttyS01 at 0xb8000400 (irq = 3) is a 16550A
Software Watchdog Timer: 0.05, timer margin: 60 sec
PCI: Setting latency timer of device 00:02.0 to 64
Universal TUN/TAP device driver 1.5 (C)1999-2002 Maxim Krasnyansky
Physically mapped flash: Found an alias at 0x400000 for the chip at 0x0
Physically mapped flash: Found an alias at 0x800000 for the chip at 0x0
Physically mapped flash: Found an alias at 0xc00000 for the chip at 0x0
Physically mapped flash: Found an alias at 0x1000000 for the chip at 0x0
Physically mapped flash: Found an alias at 0x1400000 for the chip at 0x0
Physically mapped flash: Found an alias at 0x1800000 for the chip at 0x0
Physically mapped flash: Found an alias at 0x1c00000 for the chip at 0x0
Amd/Fujitsu Extended Query Table v1.1 at 0x0040
number of CFI chips: 1
cfi_cmdset_0002: Disabling fast programming due to code brokenness.
Flash device: 0x400000 at 0x1c000000
bootloader size: 262144
Physically mapped flash: Filesystem type: squashfs, size=0x265dac
Creating 5 MTD partitions on "Physically mapped flash":
0x00000000-0x00040000 : "cfe"
0x00040000-0x003f0000 : "linux"
0x000c9800-0x00330000 : "rootfs"
mtd: partition "rootfs" doesn't start on an erase block boundary -- force read-o
nly
0x003f0000-0x00400000 : "nvram"
0x00330000-0x003f0000 : "ddwrt"
Initializing Cryptographic API
IP Protocols: ICMP, UDP, TCP, IGMP
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 1024 bind 2048)
ip_conntrack version 2.1 (512 buckets, 4096 max) - 336 bytes per conntrack
ip_tables: (C) 2000-2002 Netfilter core team
ipt_random match loaded
netfilter PSD loaded - (c) astaro AG
ipt_osf: Startng OS fingerprint matching module.
ipt_IPV4OPTSSTRIP loaded
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
802.1Q VLAN Support v1.8 Ben Greear <greearb@candelatech.com>
All bugs added by David S. Miller <davem@redhat.com>
VFS: Mounted root (squashfs filesystem) readonly.
Mounted devfs on /dev
PCI: Setting latency timer of device 00:01.0 to 64
eth1: Broadcom BCM4320 802.11 Wireless Controller 4.80.56.0
usb.c: registered new driver usbdevfs
usb.c: registered new driver hub
usb-uhci.c: $Revision: 1.275 $ time 06:20:44 May 20 2008
usb-uhci.c: High bandwidth mode enabled
PCI: Setting latency timer of device 00:03.0 to 64
usb-uhci.c: v1.275:USB Universal Host Controller Interface driver
PCI: Setting latency timer of device 00:04.0 to 64
usb-ohci.c: USB OHCI at membase 0xb8004000, IRQ 2
usb-ohci.c: usb-00:04.0, PCI device 14e4:4716
usb.c: new USB bus registered, assigned bus number 1
hub.c: USB hub found
hub.c: 2 ports detected
SCSI subsystem driver Revision: 1.00
Initializing USB Mass Storage driver...
usb.c: registered new driver usb-storage
USB Mass Storage support registered.
hub.c: new USB device 00:04.0-2, assigned address 2
usb.c: USB device not accepting new address=2 (error=-145)
hub.c: new USB device 00:04.0-2, assigned address 3
usb.c: USB device not accepting new address=3 (error=-145)
Journalled Block Device driver loaded
usb.c: registered new driver usblp
printer.c: v0.13: USB Printer Device Class driver
JFFS2 version 2.1. (C) 2001 Red Hat, Inc., designed by Axis Communications AB.
vlan0: add 01:00:5e:00:00:01 mcast address to master interface
vlan0: dev_set_promiscuity(master, 1)
device eth0 entered promiscuous mode
device vlan0 entered promiscuous mode
HELP ME! qdisc_restart called, but no Qdisc!
device eth1 entered promiscuous mode
device vlan1 entered promiscuous mode
vlan1: Setting MAC address to  00 01 e3 0e 95 c5.
vlan1: dev_set_promiscuity(master, 1)
vlan1: dev_set_allmulti(master, 1)
vlan1: dev_set_promiscuity(master, -1)
device vlan1 left promiscuous mode
vlan1: dev_set_allmulti(master, -1)
vlan0: dev_set_promiscuity(master, -1)
device eth0 left promiscuous mode
device vlan0 left promiscuous mode
device eth1 left promiscuous mode
vlan0: dev_set_promiscuity(master, 1)
device eth0 entered promiscuous mode
device vlan0 entered promiscuous mode
device eth1 entered promiscuous mode
vlan1: dev_set_allmulti(master, 1)
vlan1: dev_set_promiscuity(master, 1)
device vlan1 entered promiscuous mode
vlan1: dev_set_promiscuity(master, -1)
device vlan1 left promiscuous mode
vlan1: dev_set_allmulti(master, -1)
FAT: bogus logical sector size 65508
vlan0: dev_set_promiscuity(master, -1)
device eth0 left promiscuous mode
device vlan0 left promiscuous mode
device eth1 left promiscuous mode
vlan0: dev_set_promiscuity(master, 1)
device eth0 entered promiscuous mode
device vlan0 entered promiscuous mode
device eth1 entered promiscuous mode
vlan1: dev_set_allmulti(master, 1)
vlan1: dev_set_promiscuity(master, 1)
device vlan1 entered promiscuous mode
vlan1: dev_set_promiscuity(master, -1)
device vlan1 left promiscuous mode
vlan1: dev_set_allmulti(master, -1)
FAT: bogus logical sector size 65508

之后JFFS2的容量显示为这样：



hub.c: new USB device 00:04.0-2, assigned address 2
usb.c: USB device not accepting new address=2 (error=-145)
hub.c: new USB device 00:04.0-2, assigned address 3
usb.c: USB device not accepting new address=3 (error=-145)
想问问，以上两句是什么意思


有什么好的解决办法？ 01.jpg (5.18 KB)
2008-7-19 00:28

[ 本帖最后由 g_bigshow 于 2008-7-19 12:26 编辑 ]

g_bigshow

有高手吗？

ybaniu

我是照资料做的　能识别　不过弄了好久

jackscd

我也有相同的问题，我的SD读卡器装入4G的SD卡，显示的信息也与楼主相似。

g_bigshow

等待高手啊~

不过话又说回来，我的版本已经有USB驱动的，应该只做MOUNT就可以了，但还是不能~
今天又弄了很久~哎~

softboy

你的启动里怎么写的

softboy

你的硬盘格式化什么格式?

g_bigshow

文件格式：ext2
启动命令：
insmod /jffs/lib/modules/2.4.30/usbcore.o
insmod /jffs/lib/modules/2.4.30/usb-ohci.o
insmod /jffs/lib/modules/2.4.30/scsi_mod.o
insmod /jffs/lib/modules/2.4.30/usb-storage.o
insmod /jffs/lib/modules/2.4.30/sd_mod.o
insmod /jffs/lib/modules/2.4.30/ext2.o
insmod /jffs/lib/modules/2.4.30/jbd.o
#insmod /jffs/lib/modules/2.4.30/ext3.o
sleep 3
umount /jffs
umount /mnt
mount /dev/scsi/host0/bus0/target0/lun0/part1 /jffs
mount /dev/mtdblock/4 /mnt
mount -o bind /jffs/opt /opt

都是按教程材料做的~

softboy

硬盘有单独供电吗,用什么格式化的EXT2

[ 本帖最后由 softboy 于 2008-7-20 08:18 编辑 ]

g_bigshow

3.5寸的外置盒子，独立供电的~
用 Paragon Partition Manager V.7.00.1057  格式化的~

另外用表检查过路由的USB接口，正常5V电压输出的~

softboy

找个U盘试下，看如何

g_bigshow

u盘也不能~
换过三个U盘试验了，2个金士顿的，1个台电的~
还有一个是SSK的读卡器+PANASONIC的2G SD卡~
以上都是用那个软件刷EXT2文件格式的

softboy

重新刷固件吧,试试吧,我也是菜鸟,呵呵

cospo

建议刷官方USB版本的固件吧
我用的是dd-wrt.v24-9856_VINT_mini_usb。很完美。无需繁琐的设置

g_bigshow

正是刷官方的V24 USB MINI版本~