求大神编译个op固件

pc***

前段入手了一个pogo v2
按这个教程https://www.right.com.cn/forum/thread-174429-1-1.html刷成了openwrt
但这个固件的源不太好，很多软件用不了
请高手编译一个14.07的源http://downloads.openwrt.org/bar ... 7/kirkwood/generic/，具有基本的系统，最好能支持无线网卡、蓝牙、有“恢复出厂设置”的功能，或是可以在网页上刷机
非常感谢！
非常感谢！

本人自己编译的固件，无法使用，能给予指导也非常感谢！
SoC:   Kirkwood 88F6281_A0
DRAM:  256 MiB
WARNING: Caches not enabled
NAND:  128 MiB
In:    serial
Out:   serial
Err:   serial
Net:   egiga0
Hit any key to stop autoboot:  0
UBI: attaching mtd1 to ubi0
UBI: scanning is finished
UBI: attached mtd1 (name "mtd=3", size 126 MiB) to ubi0
UBI: PEB size: 131072 bytes (128 KiB), LEB size: 129024 bytes
UBI: min./max. I/O unit sizes: 2048/2048, sub-page size 512
UBI: VID header offset: 512 (aligned 512), data offset: 2048
UBI: good PEBs: 1008, bad PEBs: 0, corrupted PEBs: 0
UBI: user volume: 1, internal volumes: 1, max. volumes count: 128
UBI: max/mean erase counter: 2/1, WL threshold: 4096, image sequence number: 0
UBI: available PEBs: 0, total reserved PEBs: 1008, PEBs reserved for bad PEB handling: 20
** File not found /boot/zImage **
** File not found /boot/pogo_e02.dtb **
Unmounting UBIFS volume rootfs!
libfdt fdt_check_header(): FDT_ERR_BADMAGIC
No FDT memory address configured. Please configure
the FDT address via "fdt addr <address>" command.
Aborting!
No FDT memory address configured. Please configure
the FDT address via "fdt addr <address>" command.
Aborting!
Bad Linux ARM zImage magic!

pc***

大神在哪里，求指点