京信2600刷机 地址位不对，，求解

瞎***

京信2600刷机 采用的是 论坛 www0935 老师的 不支持USB版本

刷机过程中地址位和  www0935 老师的 地址不符 刷机失败，求解：


RedBoot> fis init
About to initialize [format] FLASH image system - continue (y/n)? Y
*** Initialize FLASH Image System
... Erase from 0xbfff0000-0xc0000000: .
... Program from 0x80ff0000-0x81000000 at 0xbfff0000: .
RedBoot> load -r -b 0x80060000 k.bin
Using default protocol (TFTP)
Raw file loaded 0x80060000-0x8017ffff, assumed entry at 0x80060000
RedBoot> fis create vmlinux
... Erase from 0xbf040000-0xbf160000: ..................
... Program from 0x80060000-0x80180000 at 0xbf040000: ..................
... Erase from 0xbfff0000-0xc0000000: .
... Program from 0x80ff0000-0x81000000 at 0xbfff0000: .
RedBoot> load -r -b 0x80060000 R.BIN
Using default protocol (TFTP)
Raw file loaded 0x80060000-0x8057ffff, assumed entry at 0x80060000
RedBoot> fis create rootfs
... Erase from 0xbf160000-0xbf680000: ..................................................................................
... Program from 0x80060000-0x80580000 at 0xbf160000: ..................................................................................
... Erase from 0xbfff0000-0xc0000000: .
... Program from 0x80ff0000-0x81000000 at 0xbfff0000: .
RedBoot> reset
... Resetting.+Ethernet eth0: MAC address 00:03:7f:ff:ff:fe
IP: 192.168.1.2/255.255.255.0, Gateway: 0.0.0.0
Default server: 192.168.1.1

RedBoot(tm) bootstrap and debug environment [ROMRAM]
Non-certified release, version UNKNOWN - built 14:21:45, Mar 27 2010

Copyright (C) 2000, 2001, 2002, 2003, 2004 Red Hat, Inc.

Board: pb44
RAM: 0x80000000-0x84000000, [0x800511f0-0x80fe1000] available
FLASH: 0xbf000000 - 0xc0000000, 256 blocks of 0x00010000 bytes each.
== start led2 on
== Executing boot script in 3.000 seconds - enter ^C to abort
RedBoot>   


付教程 程序图片

hi***

启动脚本还有更改下的 pdf里面有啊

瞎***

hijk1 发表于 2016-3-11 06:58
启动脚本还有更改下的 pdf里面有啊

请详解

背后那***

顶顶顶顶顶顶顶顶顶顶顶顶顶顶顶顶顶顶顶顶

瞎***

楼上纯属唔到，本贴已解决 ，地址位不影响