这路由宝插件出了什么问题

dant***

Jul 29 18:39:37 【路由宝】: 找到/opt/youku/bin/ikuacc
Jul 29 18:39:37 【路由宝】: 开始运行
Jul 29 18:39:45 【路由宝】: 绑定地址：
Jul 29 18:39:45 【路由宝】: http://pcdnapi.youku.com/pcdn/en ... kp0S6ZNXPMeMA%3D%3D
Jul 29 18:39:45 【路由宝】: SN：21151909********
Jul 29 18:39:45 【路由宝】: 进程保护启动
Jul 29 18:41:47 kernel: usb 1-1: USB disconnect, device number 2
Jul 29 18:41:48 kernel: usb 1-1: new high-speed USB device number 3 using ehci-platform
Jul 29 18:41:48 kernel: usb 1-1: New USB device found, idVendor=0930, idProduct=6544
Jul 29 18:41:48 kernel: usb 1-1: Product: TransMemory     
Jul 29 18:41:48 kernel: usb 1-1: Manufacturer: TOSHIBA
Jul 29 18:41:48 kernel: usb 1-1: SerialNumber: ECA86B241783CF8164689C8F
Jul 29 18:41:48 kernel: scsi1 : usb-storage 1-1:1.0
Jul 29 18:41:51 kernel: scsi 1:0:0:0: Direct-Access     TOSHIBA  TransMemory      1.00 PQ: 0 ANSI: 4
Jul 29 18:41:51 kernel: sd 1:0:0:0: [sdb] 15155200 512-byte logical blocks: (7.75 GB/7.22 GiB)
Jul 29 18:41:51 kernel: sd 1:0:0:0: Attached scsi generic sg0 type 0
Jul 29 18:41:51 kernel: sd 1:0:0:0: [sdb] Write Protect is off
Jul 29 18:41:51 kernel: sd 1:0:0:0: [sdb] Mode Sense: 45 00 00 00
Jul 29 18:41:51 kernel: sd 1:0:0:0: [sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
Jul 29 18:41:51 kernel:  sdb: sdb1
Jul 29 18:41:51 kernel: sd 1:0:0:0: [sdb] Attached SCSI removable disk
Jul 29 18:41:51 usb_modeswitch: no rule for device 0930:6544
Jul 29 18:41:51 automount: /sbin/automount.sh sdb1    AiDisk_b1
Jul 29 18:41:51 automount: mount  device /dev/sdb1 (vfat) to /media/AiDisk_b1 @@@@@ /media/AiDisk_b1
Jul 29 18:41:52 kernel: FAT-fs (sdb1): utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
Jul 29 18:41:57 Samba Server: daemon is started
Jul 29 18:42:04 kernel: FAT-fs (sda1): Directory bread(block 32800) failed
Jul 29 18:42:04 kernel: FAT-fs (sda1): Directory bread(block 32801) failed
Jul 29 18:42:04 kernel: FAT-fs (sda1): Directory bread(block 32802) failed
Jul 29 18:42:04 kernel: FAT-fs (sda1): Directory bread(block 46885) failed
Jul 29 18:42:04 kernel: FAT-fs (sda1): Directory bread(block 46886) failed
Jul 29 18:42:04 kernel: FAT-fs (sda1): Directory bread(block 46887) failed
Jul 29 18:42:06 kernel: FAT-fs (sda1): FAT read failed (blocknr 5047)

刷h大的华硕固件，自己改了usb。一直刷failed，刷了好几百条。可以u盘我拿出来电脑无错误啊，也没坏道

feng***

Jul 29 18:41:52 kernel: FAT-fs (sdb1): utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!

dant***

fengchen 发表于 2016-7-29 19:26
Jul 29 18:41:52 kernel: FAT-fs (sdb1): utf8 is not a recommended IO charset for FAT filesystems, fil ...

格成ext4，就变成

Jul 29 19:08:01 kernel: Buffer I/O error on device sda1, logical block 49925
Jul 29 19:08:01 kernel: Buffer I/O error on device sda1, logical block 49926
Jul 29 19:08:01 kernel: EXT4-fs warning (device sda1): ext4_end_bio:249: I/O error writing to inode 4108 (offset 11378688 size 188416 starting block 50439)
Jul 29 19:08:01 kernel: Buffer I/O error on device sda1, logical block 49927

feng***

有坏块？
U盘重新量产下看看

dant***

fengchen 发表于 2016-7-29 20:19
有坏块？
U盘重新量产下看看

用win格式化无问题，用diskgenius格就报错了，估计是有坏块。
有人叫我格成NTFS，就格了，容量变小100m，不知道是不是自动屏蔽了
现在不报错了

xq***

你的路由宝插件哪里下载呢？