华硕Asus RT-G32固件刷机、救砖教程等分享ddwrt

╩华夏***

http://www.dd-wrt.com/wiki/index.php/ASUS_RT-G32路由器配置
CPU  Atheros AR2317
ran 16M  rom 4M曾经的经典，我用了8年了
Download ASUS firmware. I used RT-G32_V3.0.2.1_RU09.bin
Download the ASUS Firmware Restoration tool. I used version 1.0.12.0
Network settings needed for ASUS flashing tool.
IP: 192.168.1.254
Subnet Mask: 255.255.255.0
Gateway 192.168.1.1
DNS can be left blank.
Set these in Control Panel -> Network Connections -> Local Area Connection -> Properties -> TCP/IP -> Properties on Windows XP.
Download asus-to-dd-wrt.bin, I used build 15778
You should be connected to the router with a network cable on port 4.
固件导致变砖按如下方法修复：电脑IP设置成192.168.1.254  连接路由器第4个网线端口
拔电源，按住 reset键，插电源，等power灯一闪一闪了，放开reset，然后用ASUS固件恢复工具上传固件即可。



链接: https://pan.baidu.com/s/1M7SWrGHzue02agYMqfvqzA 提取码: m299
注意：刷机后貌似救砖方法无效，所以ddwrt登录密码修改千万要小心。。

╩华夏***

8年了 竟然还有更新。。。2019年的固件https://dd-wrt.com/support/router-database/?model=RT-G32_-

xiao***

不错不错，很有帮助

╩华夏***

最终还是刷挂了   这是残存的TTL信息供大家研究
+Ethernet eth0: MAC address 00:24:8c:ec:38:cd
IP: 192.168.0.1/255.255.255.0, Gateway: 192.168.0.88
Default server: 192.168.0.88

RedBoot(tm) bootstrap and debug environment [ROMRAM]
Non-certified release, version V1.0.0.7 - built 20:03:51, Dec  9 2008

Copyright (C) 2000, 2001, 2002, 2003, 2004 Red Hat, Inc.

Board: ap61
RAM: 0x80000000-0x81000000, [0x80040f80-0x80fe1000] available
FLASH: 0xbfc00000 - 0xbfff0000, 64 blocks of 0x00010000 bytes each.
exec cmd=ip_address -l 192.168.1.1/24 -h 192.168.1.254
IP: 192.168.1.1/255.255.255.0, Gateway: 192.168.0.88
Default server: 192.168.1.254
== Executing boot script in 2.000 seconds - enter ^C to abort
RedBoot> fis load -l vmlinux.bin.l7
Image loaded from 0x80041000-0x80042598
RedBoot> exec -c "root=/dev/mtdblock1 rootfs=squashfs"
Now booting linux kernel:
Base address 0x80030000 Entry 0x80041400
Cmdline : root=/dev/mtdblock1 rootfs=squashfs
Atheros WiSOC DD-WRT LZMA Kernel Loader (Mar 17 2011)
decompressing.....................................................................
done.
jump to kernel...


Board: ap61
RAM: 0x80000000-0x81000000, [0x80040f80-0x80fe1000] available
FLASH: 0xbfc00000 - 0xbfff0000, 64 blocks of 0x00010000 bytes each.
exec cmd=ip_address -l 192.168.1.1/24 -h 192.168.1.254
IP: 192.168.1.1/255.255.255.0, Gateway: 192.168.0.88