|
求助各位大神:
小白购入树莓派4和N1准备当旁路由,都刷如openwrt,都是一样的设置(主路由:192.168.2.1、树莓派设置:静态ip:192.168.2.50,网管:192.168.2.1、N1设置:静态ip:192.168.2.2,网管192.168.2.1),能正常访问树莓派的管理页面,但是N1死活就是连接不上,腾达作为主路由,在腾达的管理页面能看到树莓派连接,但是N1看不到有连接,折腾了好几天换了好几个大神的固件都无法解决这个问题。。。。
N1的无线和有线接口都是能用的。。
N1的系统日志:
[ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd034]
[ 0.000000] Linux version 5.4.24-amlogic-flippy-29+ (root@x96-max) (gcc version 8.3.0 (Debian 8.3.0-6)) #60 SMP PREEMPT Sun Mar 8 17:02:19 CST 2020
[ 0.000000] Machine model: Phicomm N1
[ 0.000000] Reserved memory: created CMA memory pool at 0x000000003b400000, size 896 MiB
[ 0.000000] OF: reserved mem: initialized node linux,cma, compatible id shared-dma-pool
[ 0.000000] On node 0 totalpages: 477952
[ 0.000000] DMA32 zone: 7616 pages used for memmap
[ 0.000000] DMA32 zone: 0 pages reserved
[ 0.000000] DMA32 zone: 477952 pages, LIFO batch:63
[ 0.000000] psci: probing for conduit method from DT.
[ 0.000000] psci: PSCIv0.2 detected in firmware.
[ 0.000000] psci: Using standard PSCI v0.2 function IDs
[ 0.000000] psci: Trusted OS migration not required
[ 0.000000] percpu: Embedded 22 pages/cpu s51544 r8192 d30376 u90112
[ 0.000000] pcpu-alloc: s51544 r8192 d30376 u90112 alloc=22*4096
[ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
[ 0.000000] Detected VIPT I-cache on CPU0
[ 0.000000] CPU features: detected: ARM erratum 845719
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 470336
[ 0.000000] Kernel command line: root=UUID=d537d4f2-07c8-4fc9-9ebf-2a05bf5d8bfd rootfstype=btrfs rootflags=compress=zstd console=ttyAML0,115200n8 console=tty0 no_console_suspend consoleblank=0 fsck.fix=yes fsck.repair=yes net.ifnames=0 cgroup_enable=cpuset cgroup_memory=1 cgroup_enable=memory swapaccount=1 mac=FC:7C:02:ED:29:4E
[ 0.000000] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes, linear)
[ 0.000000] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes, linear)
[ 0.000000] mem auto-init: stackff, heap allocff, heap freeff
[ 0.000000] Memory: 924952K/1911808K available (12542K kernel code, 1058K rwdata, 4860K rodata, 640K init, 747K bss, 69352K reserved, 917504K cma-reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] rcu: Preemptible hierarchical RCU implementation.
[ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4.
[ 0.000000] Tasks RCU enabled.
[ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies.
[ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
[ 0.000000] GIC: Using split EOI/Deactivate mode
[ 0.000000] irq_meson_gpio: 110 to 8 gpio interrupt mux initialized
[ 0.000000] random: get_random_bytes called from start_kernel+0x2b8/0x440 with crng_init=0
[ 0.000000] arch_timer: cp15 timer(s) running at 24.00MHz (phys).
[ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns
[ 0.000004] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns
[ 0.000217] Console: colour dummy device 80x25
[ 0.000505] printk: console [tty0] enabled
[ 0.000539] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=240000)
[ 0.000559] pid_max: default: 32768 minimum: 301
[ 0.000654] LSM: Security Framework initializing
[ 0.000686] SELinux: Initializing.
[ 0.000736] *** VALIDATE SELinux ***
[ 0.000786] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes, linear)
[ 0.000810] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes, linear)
[ 0.000861] *** VALIDATE tmpfs ***
[ 0.001218] *** VALIDATE proc ***
[ 0.001414] *** VALIDATE cgroup1 ***
[ 0.001427] *** VALIDATE cgroup2 ***
[ 0.060008] ASID allocator initialised with 32768 entries
[ 0.079996] rcu: Hierarchical SRCU implementation.
[ 0.120047] smp: Bringing up secondary CPUs ...
[ 0.200244] Detected VIPT I-cache on CPU1
[ 0.200290] CPU1: Booted secondary processor 0x0000000001 [0x410fd034]
[ 0.280286] Detected VIPT I-cache on CPU2
[ 0.280328] CPU2: Booted secondary processor 0x0000000002 [0x410fd034]
[ 0.360336] Detected VIPT I-cache on CPU3
[ 0.360377] CPU3: Booted secondary processor 0x0000000003 [0x410fd034]
[ 0.360440] smp: Brought up 1 node, 4 CPUs
[ 0.360503] SMP: Total of 4 processors activated.
[ 0.360515] CPU features: detected: 32-bit EL0 Support
[ 0.360526] CPU features: detected: CRC32 instructions
[ 0.360896] CPU: All CPU(s) started at EL2
[ 0.360918] alternatives: patching kernel code
[ 0.361710] devtmpfs: initialized
[ 0.366220] Registered cp15_barrier emulation handler
[ 0.366247] Registered setend emulation handler
[ 0.366498] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[ 0.366528] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
[ 0.388579] xor: measuring software checksum speed
[ 0.480271] 8regs : 2374.800 MB/sec
[ 0.580303] 32regs : 2724.800 MB/sec
[ 0.680332] arm64_neon: 2404.400 MB/sec
[ 0.680342] xor: using function: 32regs (2724.800 MB/sec)
[ 0.680401] pinctrl core: initialized pinctrl subsystem
[ 0.681065] NET: Registered protocol family 16
[ 0.682646] DMA: preallocated 256 KiB pool for atomic allocations
[ 0.682683] audit: initializing netlink subsys (disabled)
[ 0.682816] audit: type=2000 audit(0.680:1): state=initialized audit_enabled=0 res=1
[ 0.683402] cpuidle: using governor menu
[ 0.683757] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
[ 0.683949] Serial: AMBA PL011 UART driver
[ 0.695973] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
[ 0.695999] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages
[ 0.696011] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[ 0.696023] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages
[ 0.699214] cryptd: max_cpu_qlen set to 1000
[ 0.870488] raid6: neonx8 gen() 1632 MB/s
[ 1.040526] raid6: neonx8 xor() 1504 MB/s
[ 1.210614] raid6: neonx4 gen() 1560 MB/s
[ 1.380631] raid6: neonx4 xor() 1471 MB/s
[ 1.550727] raid6: neonx2 gen() 1198 MB/s
[ 1.720747] raid6: neonx2 xor() 1217 MB/s
[ 1.890832] raid6: neonx1 gen() 788 MB/s
[ 2.060851] raid6: neonx1 xor() 916 MB/s
[ 2.230959] raid6: int64x8 gen() 1194 MB/s
[ 2.400983] raid6: int64x8 xor() 769 MB/s
[ 2.571033] raid6: int64x4 gen() 1029 MB/s
[ 2.741066] raid6: int64x4 xor() 752 MB/s
[ 2.911145] raid6: int64x2 gen() 727 MB/s
[ 3.081167] raid6: int64x2 xor() 614 MB/s
[ 3.251216] raid6: int64x1 gen() 485 MB/s
[ 3.421264] raid6: int64x1 xor() 465 MB/s
[ 3.421274] raid6: using algorithm neonx8 gen() 1632 MB/s
[ 3.421284] raid6: .... xor() 1504 MB/s, rmw enabled
[ 3.421299] raid6: using neon recovery algorithm
[ 3.421502] fbcon: Taking over console
[ 3.422559] iommu: Default domain type: Translated
[ 3.422710] vgaarb: loaded
[ 3.423064] SCSI subsystem initialized
[ 3.423247] usbcore: registered new interface driver usbfs
[ 3.423285] usbcore: registered new interface driver hub
[ 3.423362] usbcore: registered new device driver usb
[ 3.423642] mc: Linux media interface: v0.10
[ 3.423670] videodev: Linux video capture interface: v2.00
[ 3.423756] pps_core: LinuxPPS API ver. 1 registered
[ 3.423767] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 3.423790] PTP clock support registered
[ 3.423899] EDAC MC: Ver: 3.0.0
[ 3.424425] Advanced Linux Sound Architecture Driver Initialized.
[ 3.424839] NetLabel: Initializing
[ 3.424852] NetLabel: domain hash size = 128
[ 3.424861] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
[ 3.424912] NetLabel: unlabeled traffic allowed by default
[ 3.425528] clocksource: Switched to clocksource arch_sys_counter
[ 3.425560] *** VALIDATE bpf ***
[ 3.425785] VFS: Disk quotas dquot_6.6.0
[ 3.425854] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 3.425967] FS-Cache: Loaded
[ 3.425978] *** VALIDATE ramfs ***
[ 3.425999] *** VALIDATE hugetlbfs ***
[ 3.430537] thermal_sys: Registered thermal governor 'step_wise'
[ 3.430541] thermal_sys: Registered thermal governor 'power_allocator'
[ 3.430845] NET: Registered protocol family 2
[ 3.431295] tcp_listen_portaddr_hash hash table entries: 1024 (order: 2, 16384 bytes, linear)
[ 3.431371] TCP established hash table entries: 16384 (order: 5, 131072 bytes, linear)
[ 3.431488] TCP bind hash table entries: 16384 (order: 6, 262144 bytes, linear)
[ 3.431693] TCP: Hash tables configured (established 16384 bind 16384)
[ 3.431832] UDP hash table entries: 1024 (order: 3, 32768 bytes, linear)
[ 3.431885] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes, linear)
[ 3.432073] NET: Registered protocol family 1
[ 3.432103] NET: Registered protocol family 44
[ 3.432118] PCI: CLS 0 bytes, default 64
[ 3.432305] Trying to unpack rootfs image as initramfs...
[ 3.831572] Freeing initrd memory: 9280K
[ 3.832360] hw perfevents: enabled with armv8_cortex_a53 PMU driver, 7 counters available
[ 3.832643] kvm [1]: IPA Size Limit: 40bits
[ 3.833200] kvm [1]: vgic interrupt IRQ1
[ 3.833312] kvm [1]: Hyp mode initialized successfully
[ 4.190934] Initialise system trusted keyrings
[ 4.191120] workingset: timestamp_bits=46 max_order=19 bucket_order=0
[ 4.195491] zbud: loaded
[ 4.196879] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 4.197166] fuse: init (API version 7.31)
[ 4.197242] *** VALIDATE fuse ***
[ 4.197256] *** VALIDATE fuse ***
[ 4.197547] SGI XFS with ACLs, security attributes, no debug enabled
[ 4.226363] Key type asymmetric registered
[ 4.226389] Asymmetric key parser 'x509' registered
[ 4.226461] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 243)
[ 4.226609] io scheduler mq-deadline registered
[ 4.226621] io scheduler kyber registered
[ 4.226769] io scheduler bfq registered
[ 4.235593] soc soc0: Amlogic Meson GXL (S905D) Revision 21:d (4:2) Detected
[ 4.236689] Serial: 8250/16550 driver, 5 ports, IRQ sharing enabled
[ 4.238024] Serial: AMBA driver
[ 4.238348] c11084c0.serial: ttyAML6 at MMIO 0xc11084c0 (irq = 10, base_baud = 1500000) is a meson_uart
[ 4.238477] serial serial0: tty port ttyAML6 registered
[ 4.238665] c81004c0.serial: ttyAML0 at MMIO 0xc81004c0 (irq = 13, base_baud = 1500000) is a meson_uart
[ 5.132009] printk: console [ttyAML0] enabled
[ 5.140055] brd: module loaded
[ 5.144255] loop: module loaded
[ 5.145396] libphy: Fixed MDIO Bus: probed
[ 5.147308] meson8b-dwmac c9410000.ethernet: IRQ eth_wake_irq not found
[ 5.153036] meson8b-dwmac c9410000.ethernet: IRQ eth_lpi not found
[ 5.159272] meson8b-dwmac c9410000.ethernet: PTP uses main clock
[ 5.165112] meson8b-dwmac c9410000.ethernet: no reset control found
[ 5.171782] meson8b-dwmac c9410000.ethernet: User ID: 0x11, Synopsys ID: 0x37
[ 5.178421] meson8b-dwmac c9410000.ethernet: DWMAC1000
[ 5.183567] meson8b-dwmac c9410000.ethernet: DMA HW capability register supported
[ 5.191000] meson8b-dwmac c9410000.ethernet: RX Checksum Offload Engine supported
[ 5.198407] meson8b-dwmac c9410000.ethernet: COE Type 2
[ 5.203576] meson8b-dwmac c9410000.ethernet: TX Checksum insertion supported
[ 5.210569] meson8b-dwmac c9410000.ethernet: Wake-Up On Lan supported
[ 5.216979] meson8b-dwmac c9410000.ethernet: Normal descriptors
[ 5.222810] meson8b-dwmac c9410000.ethernet: Ring mode enabled
[ 5.228596] meson8b-dwmac c9410000.ethernet: Enable RX Mitigation via HW Watchdog Timer
[ 5.236684] libphy: stmmac: probed
[ 5.240714] usbcore: registered new interface driver r8152
[ 5.245353] usbcore: registered new interface driver ax88179_178a
[ 5.252198] dwc3 c9000000.dwc3: Failed to get clk 'ref': -2
[ 5.257718] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 5.263356] ehci-pci: EHCI PCI platform driver
[ 5.267826] ehci-platform: EHCI generic platform driver
[ 5.273086] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 5.279068] ohci-pci: OHCI PCI platform driver
[ 5.283471] ohci-platform: OHCI generic platform driver
[ 5.289136] usbcore: registered new interface driver cdc_wdm
[ 5.294254] usbcore: registered new interface driver usb-storage
[ 5.300501] mousedev: PS/2 mouse device common for all mice
[ 5.306106] input: gpio-keys-polled as /devices/platform/gpio-keys-polled/input/input0
[ 5.314251] i2c /dev entries driver
[ 5.319468] meson-gx-mmc d0072000.mmc: Got CD GPIO
[ 5.348820] meson-gx-mmc d0074000.mmc: allocated mmc-pwrseq
[ 5.377035] meson-sm: secure-monitor enabled
[ 5.377628] gxl-crypto c883e000.crypto: will run requests pump with realtime priority
[ 5.383586] gxl-crypto c883e000.crypto: will run requests pump with realtime priority
[ 5.406603] hidraw: raw HID events driver (C) Jiri Kosina
[ 5.406882] usbcore: registered new interface driver usbhid
[ 5.411894] usbhid: USB HID core driver
[ 5.415773] exFAT: Version 1.3.0
[ 5.419232] platform-mhu c883c404.mailbox: Platform MHU Mailbox registered
[ 5.429292] Initializing XFRM netlink socket
[ 5.432151] NET: Registered protocol family 10
[ 5.478054] Segment Routing with IPv6
[ 5.478265] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
[ 5.484445] bpfilter: Loaded bpfilter_umh pid 325
[ 5.486723] NET: Registered protocol family 17
[ 5.491051] NET: Registered protocol family 15
[ 5.495479] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
[ 5.502100] mmc1: new HS200 MMC card at address 0001
[ 5.508473] 8021q: 802.1Q VLAN Support v1.8
[ 5.517454] Key type dns_resolver registered
[ 5.522053] registered taskstats version 1
[ 5.524003] mmcblk1: mmc1:0001 8GTF4R 7.28 GiB
[ 5.525661] Loading compiled-in X.509 certificates
[ 5.525817] zswap: loaded using pool lzo/zbud
[ 5.530403] mmcblk1boot0: mmc1:0001 8GTF4R partition 1 4.00 MiB
[ 5.535172] Key type ._fscrypt registered
[ 5.539480] mmcblk1boot1: mmc1:0001 8GTF4R partition 2 4.00 MiB
[ 5.545014] Key type .fscrypt registered
[ 5.549203] mmcblk1rpmb: mmc1:0001 8GTF4R partition 3 512 KiB, chardev (240:0)
[ 5.555835] Btrfs loaded, crc32c=crc32c-generic
[ 5.590990] Key type encrypted registered
[ 5.606333] meson-drm d0100000.vpu: Queued 2 outputs on vpu
[ 5.606607] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 5.612831] [drm] No driver support for vblank timestamp query.
[ 5.618808] meson-drm d0100000.vpu: CVBS Output connector not available
[ 5.665577] meson-dw-hdmi c883a000.hdmi-tx: Detected HDMI TX controller v2.01a with HDCP (meson_dw_hdmi_phy)
[ 5.670160] meson-dw-hdmi c883a000.hdmi-tx: registered DesignWare HDMI I2C bus driver
[ 5.677977] meson-drm d0100000.vpu: bound c883a000.hdmi-tx (ops meson_dw_hdmi_ops)
[ 5.685421] [drm] Initialized meson 1.0.0 20161109 for d0100000.vpu on minor 0
[ 5.692229] [drm] Cannot find any crtc or sizes
[ 5.697070] libphy: mdio_mux: probed
[ 5.700287] [drm] Cannot find any crtc or sizes
[ 5.708051] libphy: mdio_mux: probed
[ 5.715751] phy phy-d0078080.phy.2: unsupported PHY mode 5
[ 5.717828] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
[ 5.721241] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1
[ 5.728786] xhci-hcd xhci-hcd.0.auto: hcc params 0x0228f664 hci version 0x100 quirks 0x0000000002010010
[ 5.737996] xhci-hcd xhci-hcd.0.auto: irq 39, io mem 0xc9000000
[ 5.744064] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.04
[ 5.752017] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 5.759172] usb usb1: Product: xHCI Host Controller
[ 5.763994] usb usb1: Manufacturer: Linux 5.4.24-amlogic-flippy-29+ xhci-hcd
[ 5.770987] usb usb1: SerialNumber: xhci-hcd.0.auto
[ 5.776237] hub 1-0:1.0: USB hub found
[ 5.779545] hub 1-0:1.0: 2 ports detected
[ 5.783724] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
[ 5.789083] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2
[ 5.796534] xhci-hcd xhci-hcd.0.auto: Host supports USB 3.0 SuperSpeed
[ 5.803042] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
[ 5.811089] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.04
[ 5.819203] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 5.826360] usb usb2: Product: xHCI Host Controller
[ 5.831183] usb usb2: Manufacturer: Linux 5.4.24-amlogic-flippy-29+ xhci-hcd
[ 5.838176] usb usb2: SerialNumber: xhci-hcd.0.auto
[ 5.843380] hub 2-0:1.0: USB hub found
[ 5.846739] hub 2-0:1.0: config failed, hub doesn't have any ports! (err -19)
[ 5.854914] meson-gx-mmc d0070000.mmc: allocated mmc-pwrseq
[ 5.886154] scpi_protocol scpi: SCP Protocol legacy pre-1.0 firmware
[ 5.896866] hctosys: unable to open rtc device (rtc0)
[ 5.898497] ALSA device list:
[ 5.899225] No soundcards found.
[ 5.902847] Freeing unused kernel memory: 640K
[ 5.907080] Run /init as init process
[ 5.922358] random: fast init done
[ 5.922645] mmc2: new high speed SDIO card at address 0001
[ 6.145591] usb 1-2: new high-speed USB device number 2 using xhci-hcd
[ 6.178878] usb 1-2: New USB device found, idVendor=05e3, idProduct=0749, bcdDevice=15.32
[ 6.181431] usb 1-2: New USB device strings: Mfr=3, Product=4, SerialNumber=2
[ 6.188853] usb 1-2: Product: USB3.0 Card Reader
[ 6.194468] usb 1-2: Manufacturer: Generic
[ 6.197295] usb 1-2: SerialNumber: 000000001532
[ 6.206100] usb-storage 1-2:1.0: USB Mass Storage device detected
[ 6.208405] scsi host0: usb-storage 1-2:1.0
[ 6.246834] usbcore: registered new interface driver uas
[ 7.278979] scsi 0:0:0:0: Direct-Access Generic STORAGE DEVICE 1532 PQ: 0 ANSI: 6
[ 7.514030] sd 0:0:0:0: [sda] 15728640 512-byte logical blocks: (8.05 GB/7.50 GiB)
[ 7.516477] sd 0:0:0:0: [sda] Write Protect is off
[ 7.520724] sd 0:0:0:0: [sda] Mode Sense: 21 00 00 00
[ 7.521176] sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[ 7.606885] sda: sda1 sda2
[ 7.609732] sd 0:0:0:0: [sda] Attached SCSI removable disk
[ 8.582136] BTRFS: device label ROOTFS devid 1 transid 20 /dev/sda2
[ 8.585161] BTRFS info (device sda2): use zstd compression, level 3
[ 8.589082] BTRFS info (device sda2): disk space caching is enabled
[ 8.595206] BTRFS info (device sda2): has skinny extents
[ 8.850471] init: Console is alive
[ 15.086817] kmodloader: loading kernel modules from /etc/modules-boot.d/*
[ 15.120345] ANTFS Module: Version
[ 15.131831] ehci-fsl: Freescale EHCI Host controller driver
[ 15.152113] uhci_hcd: USB Universal Host Controller Interface driver
[ 15.163118] kmodloader: done loading kernel modules from /etc/modules-boot.d/*
[ 15.171854] init: - preinit -
[ 15.294600] random: jshn: uninitialized urandom read (4 bytes read)
[ 15.315085] random: jshn: uninitialized urandom read (4 bytes read)
[ 15.326994] random: jshn: uninitialized urandom read (4 bytes read)
[ 15.385597] meson8b-dwmac c9410000.ethernet eth0: PHY [0.2009087f:00] driver [RTL8211F Gigabit Ethernet]
[ 15.393397] meson8b-dwmac c9410000.ethernet eth0: No Safety Features support found
[ 15.397020] meson8b-dwmac c9410000.ethernet eth0: PTP not supported by HW
[ 15.403693] meson8b-dwmac c9410000.ethernet eth0: configuring for phy/rgmii link mode
[ 18.505959] mount_root: mounting /dev/root
[ 18.520693] BTRFS info (device sda2): disk space caching is enabled
[ 18.523295] mount_root: loading kmods from internal overlay
[ 18.802987] kmodloader: loading kernel modules from //etc/modules-boot.d/*
[ 18.811219] kmodloader: done loading kernel modules from //etc/modules-boot.d/*
[ 18.861101] random: crng init done
[ 18.861155] random: 1 urandom warning(s) missed due to ratelimiting
[ 18.991397] block: attempting to load /tmp/overlay/upper/etc/config/fstab
[ 18.992723] block: unable to load configuration (fstab: Entry not found)
[ 18.999371] block: attempting to load /tmp/overlay/etc/config/fstab
[ 19.005586] block: unable to load configuration (fstab: Entry not found)
[ 19.012142] block: attempting to load /etc/config/fstab
[ 19.021315] block: extroot: unable to determine root device
[ 19.024222] urandom-seed: Seeding with /etc/urandom.seed
[ 19.053863] procd: - early -
[ 19.592559] procd: - ubus -
[ 19.644410] procd: - init -
[ 19.874369] urngd: v1.0.2 started.
[ 20.047556] kmodloader: loading kernel modules from /etc/modules.d/*
[ 20.098758] device-mapper: ioctl: 4.41.0-ioctl (2019-09-16) initialised: dm-devel@redhat.com
[ 20.141797] tun: Universal TUN/TAP device driver, 1.6
[ 20.160276] ipip: IPv4 and MPLS over IPv4 tunneling driver
[ 20.189821] gre: GRE over IPv4 demultiplexor driver
[ 20.199707] ip_gre: GRE over IPv4 tunneling driver
[ 20.430899] Mirror/redirect action on
[ 20.505037] u32 classifier
[ 20.505068] Performance counters on
[ 20.506037] input device check on
[ 20.509552] Actions configured
[ 20.591922] Bridge firewalling registered
[ 20.593821] usbcore: registered new interface driver cdc_ether
[ 20.597444] usbcore: registered new interface driver cdc_ncm
[ 20.609039] usbcore: registered new interface driver huawei_cdc_ncm
[ 20.649090] usbcore: registered new interface driver rndis_host
[ 20.652719] usbcore: registered new interface driver ums-alauda
[ 20.656065] usbcore: registered new interface driver ums-cypress
[ 20.662017] usbcore: registered new interface driver ums-datafab
[ 20.668206] usbcore: registered new interface driver ums-freecom
[ 20.673851] usbcore: registered new interface driver ums-isd200
[ 20.679731] usbcore: registered new interface driver ums-jumpshot
[ 20.685689] usbcore: registered new interface driver ums-karma
[ 20.691595] usbcore: registered new interface driver ums-sddr09
[ 20.697438] usbcore: registered new interface driver ums-sddr55
[ 20.703281] usbcore: registered new interface driver ums-usbat
[ 20.710728] usbcore: registered new interface driver usblp
[ 20.716571] usbcore: registered new interface driver usbserial_generic
[ 20.720279] usbserial: USB Serial support registered for generic
[ 20.745016] xt_time: kernel timezone is -0000
[ 20.762049] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[ 20.770801] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[ 20.773442] usbcore: registered new interface driver ch341
[ 20.777318] usbserial: USB Serial support registered for ch341-uart
[ 20.785480] usbcore: registered new interface driver cp210x
[ 20.789062] usbserial: USB Serial support registered for cp210x
[ 20.800140] usbcore: registered new interface driver pl2303
[ 20.800287] usbserial: USB Serial support registered for pl2303
[ 20.808808] PPP generic driver version 2.4.2
[ 20.811388] PPP MPPE Compression module registered
[ 20.816334] NET: Registered protocol family 24
[ 20.837134] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43455-sdio for chip BCM4345/6
[ 20.840853] usbcore: registered new interface driver brcmfmac
[ 20.851837] kmodloader: done loading kernel modules from /etc/modules.d/*
[ 21.045815] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43455-sdio for chip BCM4345/6
[ 21.165997] brcmfmac: brcmf_c_preinit_dcmds: Firmware: BCM4345/6 wl0: Feb 27 2018 03:15:32 version 7.45.154 (r684107 CY) FWID 01-4fbe0b04
[ 21.659860] FAT-fs (sda1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
[ 22.012656] xt_FULLCONENAT: RFC3489 Full Cone NAT module
[ 22.012656] xt_FULLCONENAT: Copyright (C) 2018 Chion Tang <tech@chionlab.moe>
[ 23.470341] meson8b-dwmac c9410000.ethernet eth0: PHY [0.2009087f:00] driver [RTL8211F Gigabit Ethernet]
[ 23.494157] meson8b-dwmac c9410000.ethernet eth0: No Safety Features support found
[ 23.496350] meson8b-dwmac c9410000.ethernet eth0: PTP not supported by HW
[ 23.502839] meson8b-dwmac c9410000.ethernet eth0: configuring for phy/rgmii link mode
[ 23.513160] br-lan: port 1(eth0) entered blocking state
[ 23.515873] br-lan: port 1(eth0) entered disabled state
[ 23.521345] device eth0 entered promiscuous mode
[ 23.621727] netlink: 4 bytes leftover after parsing attributes in process `iw'.
[ 23.659388] ieee80211 phy0: brcmf_cfg80211_add_iface: iface validation failed: err=-16
[ 27.631286] meson8b-dwmac c9410000.ethernet eth0: Link is Up - 100Mbps/Full - flow control rx/tx
[ 27.634486] br-lan: port 1(eth0) entered blocking state
[ 27.639646] br-lan: port 1(eth0) entered listening state
[ 29.685539] br-lan: port 1(eth0) entered learning state
[ 31.755561] br-lan: port 1(eth0) entered forwarding state
[ 31.755625] br-lan: topology change detected, propagating
[ 31.760860] IPv6: ADDRCONF(NETDEV_CHANGE): br-lan: link becomes ready
[ 103.527468] netlink: 4 bytes leftover after parsing attributes in process `iw'.
[ 106.005804] netlink: 4 bytes leftover after parsing attributes in process `iw'.
[ 106.044087] ieee80211 phy0: brcmf_cfg80211_add_iface: iface validation failed: err=-16
[ 125.978387] ieee80211 phy0: brcmf_cfg80211_get_tx_power: error (-512)
[ 135.411399] netlink: 4 bytes leftover after parsing attributes in process `iw'.
[ 244.907120] netlink: 4 bytes leftover after parsing attributes in process `iw'.
[ 245.016001] ieee80211 phy0: brcmf_net_attach: couldn't register the net device
[ 245.017602] ieee80211 phy0: brcmf_ap_add_vif: Registering netdevice failed
[ 245.024429] ieee80211 phy0: brcmf_cfg80211_add_iface: add iface wlan0 type 3 failed: err=-52
[ 245.108525] br-lan: port 2(wlan0) entered blocking state
[ 245.108627] br-lan: port 2(wlan0) entered disabled state
[ 245.113963] device wlan0 entered promiscuous mode
[ 245.686000] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 245.686916] br-lan: port 2(wlan0) entered blocking state
[ 245.692000] br-lan: port 2(wlan0) entered listening state
[ 247.755538] br-lan: port 2(wlan0) entered learning state
[ 249.835544] br-lan: port 2(wlan0) entered forwarding state
[ 249.835610] br-lan: topology change detected, propagating
[ 301.701567] br-lan: port 2(wlan0) entered disabled state
[ 301.701694] br-lan: port 1(eth0) entered disabled state
[ 301.713865] device eth0 left promiscuous mode
[ 301.714080] br-lan: port 1(eth0) entered disabled state
[ 301.786152] meson8b-dwmac c9410000.ethernet eth0: Link is Down
[ 301.791683] device wlan0 left promiscuous mode
[ 301.792136] br-lan: port 2(wlan0) entered disabled state
[ 302.019381] meson8b-dwmac c9410000.ethernet eth0: PHY [0.2009087f:00] driver [RTL8211F Gigabit Ethernet]
[ 302.035647] meson8b-dwmac c9410000.ethernet eth0: No Safety Features support found
[ 302.037597] meson8b-dwmac c9410000.ethernet eth0: PTP not supported by HW
[ 302.044320] meson8b-dwmac c9410000.ethernet eth0: configuring for phy/rgmii link mode
[ 302.053046] br-lan: port 1(eth0) entered blocking state
[ 302.057402] br-lan: port 1(eth0) entered disabled state
[ 302.062897] device eth0 entered promiscuous mode
[ 302.068462] br-lan: port 2(wlan0) entered blocking state
[ 302.072283] br-lan: port 2(wlan0) entered disabled state
[ 302.077934] device wlan0 entered promiscuous mode
[ 302.083687] br-lan: port 2(wlan0) entered blocking state
[ 302.087486] br-lan: port 2(wlan0) entered listening state
[ 304.155561] br-lan: port 2(wlan0) entered learning state
[ 306.235554] br-lan: port 2(wlan0) entered forwarding state
[ 306.235619] br-lan: topology change detected, propagating
[ 306.240973] IPv6: ADDRCONF(NETDEV_CHANGE): br-lan: link becomes ready
[ 307.156492] meson8b-dwmac c9410000.ethernet eth0: Link is Up - 100Mbps/Full - flow control rx/tx
[ 307.159681] br-lan: port 1(eth0) entered blocking state
[ 307.164839] br-lan: port 1(eth0) entered listening state
[ 309.195544] br-lan: port 1(eth0) entered learning state
[ 311.275540] br-lan: port 1(eth0) entered forwarding state
[ 311.275588] br-lan: topology change detected, propagating |
|