K2G 有padavan固件和breed了吗？

lixi***

K2G的flash分区结构如下：
root@K2G:/www/cgi-bin# cat /proc/mtd
dev:    size   erasesize  name
mtd0: 00800000 00010000 "ALL"
mtd1: 00030000 00010000 "Bootloader"
mtd2: 00010000 00010000 "Config"
mtd3: 00010000 00010000 "Factory"
mtd4: 00050000 00010000 "permanent_config"
mtd5: 00760000 00010000 "firmware"
mtd6: 0062bf71 00010000 "rootfs"
mtd7: 000d0000 00010000 "rootfs_data"
root@K2G:/www/cgi-bin#

[    1.648000] N25Q064A13ESE40F(20 ba171000) (8192 Kbytes)
[    1.660000] mtd .name = raspi, .size = 0x00800000 (0M) .erasesize = 0x000000
08 (0K) .numeraseregions = 65536
[    1.680000] Creating 6 MTD partitions on "raspi":
[    1.688000] 0x000000000000-0x000000800000 : "ALL"
[    1.700000] 0x000000000000-0x000000030000 : "Bootloader"
[    1.712000] 0x000000030000-0x000000040000 : "Config"
[    1.720000] 0x000000040000-0x000000050000 : "Factory"
[    1.732000] 0x000000050000-0x0000000a0000 : "permanent_config"
[    1.748000] 0x0000000a0000-0x000000800000 : "firmware"
[    1.756000] 0x0000001d408f-0x000000800000 : "rootfs"
[    1.768000] mtd: partition "rootfs" must either start or end on erase block
boundary or be smaller than an erase block -- forcing read-only

fs***

breed已经有人刷了

lixi***

fsphm 发表于 2018-6-13 20:32
breed已经有人刷了

我刷过了，能起来，但是不敢刷其他固件，因为k2g的flash结构看起来与k2不同
下面是k2的
[ 1.680000] Creating 5 MTD partitions on "raspi":
[ 1.692000] 0x000000000000-0x000000800000 : "ALL"
[ 1.700000] 0x000000000000-0x000000030000 : "Bootloader"
[ 1.712000] 0x000000030000-0x000000040000 : "Config"
[ 1.724000] 0x000000040000-0x000000050000 : "Factory"
[ 1.736000] 0x000000050000-0x000000800000 : "firmware"
[ 1.748000] 0x00000018442e-0x000000800000 : "rootfs"
[ 1.756000] mtd: partition "rootfs" must either start or end on erase block boundary or be smaller than an erase block -- forcing read-only

2543***

k2t怎么刷breed啊、、、、、、、、、

梦里***

还有颗千兆螃蟹芯片，怎么可能通用。最早应该还是A大的官改吧，等咯