padavan作为二级路由用自动获取方式内网无法获得ipv6地址

litiande1217

我WAN没有IP LAN有

lzxin6621

我是这样做弄的

longone

lzxin6621 发表于 2020-1-13 11:53
我是这样做弄的

这样 就能解决吗？我现在没用padavan。

lzxin6621

longone 发表于 2020-1-13 12:33
这样 就能解决吗？我现在没用padavan。

这个是我最近在学编译老毛子时的设置 上级软路由 老毛子固件wan是默认的自动获取上级地址 ipv6这样子设置后 老毛子接的都可以ipv6

epaygps

我的连WAN都无法获取 IPV6 光猫是桥接的 拨号获取不了
Jan 15 13:23:19 【防火墙规则】: 脚本完成
Jan 15 13:23:19 ppp: lcp-echo is off
Jan 15 13:23:19 pppd[30402]: Plugin rp-pppoe.so loaded.
Jan 15 13:23:19 pppd[30402]: RP-PPPoE plugin version 3.12 compiled against pppd 2.4.7
Jan 15 13:23:19 pppd[30404]: pppd 2.4.7 started by admin, uid 0
Jan 15 13:23:19 pppd[30404]: PPP session is 1 (0x1)
Jan 15 13:23:19 pppd[30404]: Connected to a4:7b:2c:25:f3:6a via interface eth2.2
Jan 15 13:23:19 pppd[30404]: Using interface ppp0
Jan 15 13:23:19 pppd[30404]: Connect: ppp0 <--> eth2.2
Jan 15 13:23:19 kernel: eth2.3: IPv6 duplicate address fe80::20c:43ff:fe76:2023 detected!
Jan 15 13:23:19 wsdd2[1835]: error: wsdd-mcast-v4: wsd_send_soap_msg: send
Jan 15 13:23:19 dnsmasq[30416]: started, version 2.80 cachesize 1024
Jan 15 13:23:19 dnsmasq[30416]: compile time options: IPv6 GNU-getopt no-RTC no-DBus no-i18n no-IDN DHCP DHCPv6 no-Lua TFTP no-conntrack ipset no-auth no-DNSSEC no-loop-detect no-inotify no-dumpfile
Jan 15 13:23:19 dnsmasq-dhcp[30416]: DHCP, IP range 192.168.2.2 -- 192.168.2.244, lease time 1d
Jan 15 13:23:19 dnsmasq-dhcp[30416]: DHCPv6 stateless on br0
Jan 15 13:23:19 dnsmasq-dhcp[30416]: DHCPv4-derived IPv6 names on br0
Jan 15 13:23:19 dnsmasq-dhcp[30416]: router advertisement on br0
Jan 15 13:23:19 dnsmasq-dhcp[30416]: IPv6 router advertisement enabled
Jan 15 13:23:19 dnsmasq-dhcp[30416]: DHCP, sockets bound exclusively to interface br0
Jan 15 13:23:19 dnsmasq[30416]: read /etc/hosts - 5 addresses
Jan 15 13:23:19 dnsmasq[30416]: read /etc/storage/dnsmasq/hosts - 0 addresses
Jan 15 13:23:19 dnsmasq-dhcp[30416]: read /etc/dnsmasq/dhcp/dhcp-hosts.rc
Jan 15 13:23:19 wsdd2[1835]: wsdd-http-v6: open_ep: bind: Address already in use

zxyhr

epaygps 发表于 2020-1-15 17:26
我的连WAN都无法获取 IPV6 光猫是桥接的 拨号获取不了
Jan 15 13:23:19 【防火墙规则】: 脚本完成
Jan 15 ...

你测试光猫可以获取到吗？

lanly

lzxin6621 发表于 2020-1-13 11:53
我是这样做弄的

我也是这样弄，wan口  lan口都可获得ipv6  240e  开头的, 但访问不了ipv6 的网站

clock_pulse

将ipv6的dns改成240c::6666和240c::6644。然后将ipv6地址改成dc00:101:101::2