找回密码
 立即注册

QQ登录

只需一步,快速开始

搜索
广告投放联系QQ68610888
查看: 2763|回复: 4

巴比禄whr-HP-G54 ttl一直看到在重启是什么原因~!

[复制链接]
flash和内存都换了 还是一直重启

ttl显示内容如下:
0x00040000-0x003e0000 : "linux"
0x00100000-0x003e0000 : "rootfs"
0x003e0000-0x00400000 : "nvram"
sflash: found no supported devices
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 1024 bind 2048)
ip_conntrack version 2.1 (128 buckets, 1024 max) - 344 bytes per conntrack
ip_tables: (C) 2000-2002 Netfilter core team
*** #define HZ is (100).
ipt_time loading
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
NET4: Ethernet Bridge 008 for NET4.0
802.1Q VLAN Support v1.7 Ben Greear <greearb@candelatech.com>
All bugs added by David S. Miller <davem@redhat.com>
VFS: Mounted root (cramfs filesystem) readonly.
Mounted devfs on /dev
Freeing unused kernel memory: 64k freed
init started:  BusyBox v1.00 (2005.09.13-06:23+0000) multi-call binary
Algorithmics/MIPS FPU Emulator v1.5
mount: Mounting none on / failed: Permission denied
MidLayer.c(1878) ML_Initialize :***** Please push init button if you want to ini
t_reboot ******
insmod: /lib/modules/2.4.20: No such file or directory
Using /lib/modules/kernel/drivers/net/et/et.o
Warning: loading et will taint the kernel: no license
  See http://www.tux.org/lkml/#export-tainted for information about tainted modu
les
eth0: Broadcom BCM47xx 10/100 Mbps Ethernet Controller 3.130.1.10

Please press Enter to activate this console.

CFE version 1.0.37-1.00.0.03 for BCM947XX (32bit,SP,LE)
Build Date: 2005钳  7奉  3泣 泣退泣 21:39:04 JST (root@ifedora)
Copyright (C) 2000,2001,2002,2003 Broadcom Corporation.

Initializing Arena
Initializing Devices.
* cmdset: AMD Standard
* Insaner_1 = (0xa8)
* flashutl_cmd: type (0004), read_id (0090)
-> vendid (00C2), devid (22A8), devid2 (0000)
* flashutl_cmd: type (0003), read_id (0090)
-> vendid (00C2), devid (22A8), devid2 (0000)
* flashutl_cmd: type (0002), read_id (0090)
-> vendid (0019), devid (1000), devid2 (0000)
* Flash Info. -> manufacturer (FF), device (FF)
* Flash Info. -> manufacturer2 (0000), device2 (0000)
* Insaner_2 = (0xa8)
* cmdset: AMD Standard
* Insaner_1 = (0xa8)
* flashutl_cmd: type (0004), read_id (0090)
-> vendid (00C2), devid (22A8), devid2 (0000)
* flashutl_cmd: type (0003), read_id (0090)
-> vendid (00C2), devid (22A8), devid2 (0000)
* flashutl_cmd: type (0002), read_id (0090)
-> vendid (0019), devid (1000), devid2 (0000)
* Flash Info. -> manufacturer (FF), device (FF)
* Flash Info. -> manufacturer2 (0000), device2 (0000)
* Insaner_2 = (0xa8)
* cmdset: AMD Standard
* Insaner_1 = (0xa8)
* flashutl_cmd: type (0004), read_id (0090)
-> vendid (00C2), devid (22A8), devid2 (0000)
* flashutl_cmd: type (0003), read_id (0090)
-> vendid (00C2), devid (22A8), devid2 (0000)
* flashutl_cmd: type (0002), read_id (0090)
-> vendid (0019), devid (1000), devid2 (0000)
* Flash Info. -> manufacturer (FF), device (FF)
* Flash Info. -> manufacturer2 (0000), device2 (0000)
* Insaner_2 = (0xa8)
et0: Broadcom BCM47xx 10/100 Mbps Ethernet Controller 3.90.39.0
* memc_config: (00048000)
CPU type 0x29008: 200MHz
Total memory: 16384 KBytes

Total memory used by CFE:  0x80400000 - 0x804A15F0 (660976)
Initialized Data:          0x804372E0 - 0x80439E40 (11104)
BSS Area:                  0x80439E40 - 0x8043B5F0 (6064)
Local Heap:                0x8043B5F0 - 0x8049F5F0 (409600)
Stack Area:                0x8049F5F0 - 0x804A15F0 (8192)
Text (code) segment:       0x80400000 - 0x804372E0 (226016)
Boot area (physical):      0x004A2000 - 0x004E2000
Relocation Factor:         I:00000000 - D:00000000

Device eth0:  hwaddr 00-16-01-2D-2D-3C, ipaddr 192.168.11.1, mask 255.255.255.0
        gateway not set, nameserver not set
Wait a few seconds for an image
Reading :: Failed.: Timeout occured
>>> boot -raw -z -addr=0x80001000 -max=0x3a0000 flash0.os:
Loader:raw Filesys:raw Dev:flash0.os File: Optionsnull)
Loading: ...... 1732608 bytes read
Entry at 0x80001000
Closing network.
Starting program at 0x80001000
CPU revision is: 00029008
Primary instruction cache 16kb, linesize 16 bytes (2 ways)
Primary data cache 8kb, linesize 16 bytes (2 ways)
Linux version 2.4.20 (root@localhost.localdomain) (gcc version 3.3.3) #7 2005骞?
9鏈?13鏃?鐏?洔鏃?15:13:42 JST
Setting the PFC to its default value
Determined physical RAM map:
memory: 01000000 @ 00000000 (usable)
On node 0 totalpages: 4096
zone(0): 4096 pages.
zone(1): 0 pages.
zone(2): 0 pages.
Kernel command line: root=/dev/mtdblock2 noinitrd console=ttyS0,115200
CPU: BCM5352 rev 0 at 200 MHz
Calibrating delay loop... 199.47 BogoMIPS
Memory: 14148k/16384k available (1507k kernel code, 2236k reserved, 104k data, 6
4k init, 0k highmem)
Dentry cache hash table entries: 2048 (order: 2, 16384 bytes)
Inode cache hash table entries: 1024 (order: 1, 8192 bytes)
Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
Buffer-cache hash table entries: 1024 (order: 0, 4096 bytes)
Page-cache hash table entries: 4096 (order: 2, 16384 bytes)
Checking for 'wait' instruction...  unavailable.
POSIX conformance testing by UNIFIX
PCI: no core
PCI: Fixing up bus 0
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
Starting kswapd
devfs: v1.12c (20020818) Richard Gooch (rgooch@atnf.csiro.au)
devfs: boot_options: 0x1
mel_initsw: GPIO initialize done..
BUFFALO SWICH&LED DRIVER ver 1.00
Serial driver version 5.05c (2001-07-08) with MANY_PORTS SHARE_IRQ SERIAL_PCI en
abled
ttyS00 at 0xb8000300 (irq = 3) is a 16550A
ttyS01 at 0xb8000400 (irq = 0) is a 16550A
HDLC line discipline: version $Revision$, maxframe=4096
N_HDLC line discipline registered.
PPP generic driver version 2.4.2
PPP Deflate Compression module registered
PPP BSD Compression module registered
Amd/Fujitsu Extended Query Table v1.1 at 0x0040
number of CFI chips: 1
Flash device: 0x400000 at 0x1c000000
Physically mapped flash: cramfs filesystem found at block 1024
Creating 4 MTD partitions on "hysically mapped flash":
0x00000000-0x00040000 : "boot"
0x00040000-0x003e0000 : "linux"
0x00100000-0x003e0000 : "rootfs"
0x003e0000-0x00400000 : "nvram"
sflash: found no supported devices
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 1024 bind 2048)
ip_conntrack version 2.1 (128 buckets, 1024 max) - 344 bytes per conntrack
ip_tables: (C) 2000-2002 Netfilter core team
*** #define HZ is (100).
ipt_time loading
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
NET4: Ethernet Bridge 008 for NET4.0
802.1Q VLAN Support v1.7 Ben Greear <greearb@candelatech.com>
All bugs added by David S. Miller <davem@redhat.com>
VFS: Mounted root (cramfs filesystem) readonly.
Mounted devfs on /dev
Freeing unused kernel memory: 64k freed
init started:  BusyBox v1.00 (2005.09.13-06:23+0000) multi-call binary
Algorithmics/MIPS FPU Emulator v1.5
mount: Mounting none on / failed: Permission denied
MidLayer.c(1878) ML_Initialize :***** Please push init button if you want to ini
t_reboot ******
insmod: /lib/modules/2.4.20: No such file or directory
Using /lib/modules/kernel/drivers/net/et/et.o
Warning: loading et will taint the kernel: no license
  See http://www.tux.org/lkml/#export-tainted for information about tainted modu
les
eth0: Broadcom BCM47xx 10/100 Mbps Ethernet Controller 3.130.1.10

Please press Enter to activate this console. create procpoint for station inform
ation eth%d
eth1: Broadcom BCM4318 802.11 Wireless Controller 3.130.1.10
Unable to handle kernel paging request at virtual address 00008560, epc == c0026
ef0, ra == 8001a778
Oops in fault.c::do_page_fault, line 192:
$0 : 00000000 1000fc00 801cc720 1000fc01 802f1400 c0026ec0 00000000 00000000
$8 : 00000000 08954400 000001c2 ffffffff 00000000 80f48000 1000fc01 0043b0a0
$16: 00008560 00000000 00000000 00000001 8017bea8 00000002 8017bdb0 2ac4c068
$24: 00000120 000087f0                   8017a000 8017bd88 00000000 8001a778
Hi : 00000090
Lo : 0000007e
epc  : c0026ef0    Tainted: P
Status: 1000fc02
Cause : 00000008
Process swapper (pid: 0, stackpage=8017a000)
Stack:    00000000 00000001 8019e2c4 00000000 80248580 8001a778 0000003c
80150a08 ba2e8ba3 00000000 8017bdb0 8017bdb0 00000001 00000000 00000000
00000001 8017bea8 00000002 80c0c000 2ac4c068 8001a0b4 8001a198 8017bea8
00000007 8017bea8 00000002 801cb8c0 800162ac 00000000 800b80c8 800092c8
8009969c 800160fc 8002eab4 08954400 ffffffff 80150bd4 80150ba0 00000000
8018d068 ...
Call Trace:   [<8001a778>] [<80150a08>] [<8001a0b4>] [<8001a198>] [<800162ac>]
[<800b80c8>] [<800092c8>] [<8009969c>] [<800160fc>] [<8002eab4>] [<80150bd4>]
[<80150ba0>] [<80015cac>] [<80002110>] [<8000f624>] [<80002450>] [<8009f25c>]
[<80098a54>] [<80150a08>] [<80007d98>] [<80150908>] [<80008400>] [<80002fe8>]
[<80002fcc>] [<8000178c>] [<80001780>]
我的恩山、我的无线 The best wifi forum is right here.
这个我不懂。。。。。。。。。。。。。
我的恩山、我的无线 The best wifi forum is right here.
回复

使用道具 举报

可能是内存的问题!
我的恩山、我的无线 The best wifi forum is right here.
回复

使用道具 举报

内存一般没有问题的,这个机器毛病比较多,多半是有条过孔线断了。自己补焊下,或者用热风吹吹板子就能用了,这个机器启动了千万别断电,一断电就容易坏。保重。
我的恩山、我的无线 The best wifi forum is right here.
回复

使用道具 举报

 楼主| | 显示全部楼层
谢谢朋友帮忙 ,已经找到问题了  内存过孔断线了。
我的恩山、我的无线 The best wifi forum is right here.
回复

使用道具 举报

您需要登录后才可以回帖 登录 | 立即注册

本版积分规则

关闭

欢迎大家光临恩山无线论坛上一条 /1 下一条

有疑问请添加管理员QQ86788181|手机版|小黑屋|Archiver|恩山无线论坛(常州市恩山计算机开发有限公司版权所有) ( 苏ICP备05084872号 )

GMT+8, 2024-4-29 19:08

Powered by Discuz! X3.5

© 2001-2024 Discuz! Team.

| 江苏省互联网有害信息举报中心 举报信箱:js12377 | @jischina.com.cn 举报电话:025-88802724 本站不良内容举报信箱:68610888@qq.com 举报电话:0519-86695797

快速回复 返回顶部 返回列表