WHR-HP-GN TTL刷机求救~！

wangc***

BUFFALO U-BOOT Ver 1.00
AP93 (ar7240) U-boot

sri
=====================================================================================================================================
  TAP CALC (read_cnt=512)
----+--------------------------------------------------------------------------------------------------------------------------------
TAP |   0   1   2   3   4   5   6   7   8   9  10  11  12  13  14  15  16  17  18  19  20  21  22  23  24  25  26  27  28  29  30  31
----+--------------------------------------------------------------------------------------------------------------------------------
FAIL|   0   0   0   0   0   0   0   0   0   0   0   0   0   0   0   0 512 512 512 512 512 512 512 512 512 512 512 512 512 512 512 512
----+--------------------------------------------------------------------------------------------------------------------------------
SELECT tap0=7 / tap1=8

#### ddr registers
  B8000000 = C7BC8CD0
  B8000004 = 9DD0E6A8
  B8000008 = 00000033
  B800000C = 00000002
  B8000010 = 00000000
  B8000014 = 00004AF0
  B8000018 = 000000FF
  B800001C = 00000007
  B8000020 = 00000008
  B8000024 = 00000005
  B8000028 = 00000005


32 MB
Memory Test (address line)
Memory Test start(0xA0000000) end(0xA2000000) size(33554432)
Data line test start:0xa0000000 pattern 0x00000001 0x00000003 0x00000007 0x0000000F 0x00000005 0x00000015 0x00000055 0xAAAAAAAA
Address line test start:0xa0000000 len:0x2000000 pattern 0xAAAAAAAA 0x55555555  
Fill test patnum:5
fill Pattern 5555AAAA  Writing...   Reading...
fill Pattern AAAA5555  Writing...   Reading...
fill Pattern 0000FFFF  Writing...   Reading...
fill Pattern FFFF0000  Writing...   Reading...
fill Pattern AAAAAAAA  Writing...   Reading...
Top of RAM usable for U-Boot at: 82000000
Reserving 289k for U-Boot at: 81fb4000
Reserving 136k for malloc() at: 81f92000
Reserving 44 Bytes for Board Info at: 81f91fd4
Reserving 36 Bytes for Global Data at: 81f91fb0
Reserving 128k for boot params() at: 81f71fb0
Stack Pointer at: 81f71f98
Now running in RAM - U-Boot at: 81fb4000
id read 0x100000ff
flash size 4194304, sector count = 1024
Flash:  4 MB
In:    serial
Out:   serial
Err:   serial
Memory Test
uboot use  81F71FB0 - 82000000
Memory Test start(80000000) end(81F00000) size(01F00000)
Pattern 00000000  Writing...  Reading...
Memory Test OK
### buf_ver=[1.00] U-Boot Ver.=[1.00]
### build_date(env)=[Apr 30 2009 - 10:09:03] build_date(bin)=[Apr 30 2009 - 10:09:03]
ag7240_enet_initialize...
Reading MAC Address from ENV(0x81f922d9)
: cfg1 0xf cfg2 0x7014
eth0: 02:aa:bb:cc:dd:1d
eth0 up
No valid address in Flash. Using fixed address
: cfg1 0xf cfg2 0x7014
eth1: 00:03:7f:09:0b:ad
ATHRS26: resetting s26
ATHRS26: s26 reset done
eth1 up
eth0  02:AA:BB:CCD:1D
, eth1  00:03:7F:09:0B:AD


tftp server(receive) go, waiting:4[sec]
Load address: 0x80f00000

TftpServer Timeout;
no file was loaded.
## Booting image at bf040000 ...
Bad Magic Number
# LED(0x2) Blink[2] (Please press 'Ctrl+c' to stop)

这是TTL显示的信息~！到这就不动了。请问后续工作如何展开才能救回我的白砖~！

还请高人们指点~！感谢~！

lige***

到DD官网下个固件，在TTL显示“tftp server(receive) go, waiting:4[sec]”用TFTP工具上传上去！
用TFTP上传的固件是这个
Buffalo WHR-HP-GN: Webflash flashing whr-hp-gn-firmware-MULTI.bin 2010-08-09 3,44 MB

xgg5***

LS正确，呵呵，一刷就好了。

wangc***

感谢楼上两位帮助。那tftp里路由地址填写什么呢？我这信息里貌似没有IP地址啊~！

wangc***

经过三天努力~！终于是把我的小白救活了~！

感谢帮忙的兄弟们~！

josh***

请问，五楼怎样通过tftp上传固件啊。我的小白怎么都是ping不通，所以上传不了固件。帮忙解答下。

pass***

怎样通过tftp上传固件