求个8145v编程器固件 刷论坛加强版砖了

mlpza***

求个8145v编程器固件 刷论坛加强版砖了

U-Boot 2010.03 (V300R017C10 May 12 2017 - 01:41:52)

Mbist flag = 0x0, ddr totoal size = 0x20000000
DRAM:  512 MB
Boot From NAND flash
Chip Type is SD5116T
NAND:  Special Nand id table Version 1.23
Nand ID: 0x98 0xDA 0x90 0x15 0xF6 0x16 0x08 0x00
now using default nand flash type, Block:128KB Page:2KB!
ECC Match pagesize:2K, oobzie:64, ecctype:4bit
Nand(Hardware): Block:128KB Page:2KB Chip:128MB*1 OOB:64B ECC:4bit
128 MiB
Using default environment

In:    serial
Out:   serial
Err:   serial
PHY power down !!!
[main.c__6102]::CRC:0x0, Magic1:0x0, Magic2:0x0, count:1, CommitedArea:0x0, Active:0x0, RunFlag:0x0
0x000000100000-0x000008000000 : "mtd=1"
UBI: attaching mtd1 to ubi0
UBI: empty MTD device detected
UBI: create volume table (copy #1)
UBI error: ubi_scan_get_free_peb: no eraseblocks found
UBI error: ubi_init: cannot attach mtd1
UBI error: ubi_init: UBI error: cannot initialize UBI, error -28
UBI init error -28
ERROR: failed to select 'ubifs' partition, please format it first!
Start from main system(0x0)!
CRC:0x0, Magic1:0x0, Magic2:0x0, count:1, CommitedArea:0x0, Active:0x0, RunFlag:0x0
0x000000100000-0x000008000000 : "mtd=1"
UBI: attaching mtd1 to ubi0
UBI: empty MTD device detected
UBI: create volume table (copy #1)
UBI error: ubi_scan_get_free_peb: no eraseblocks found
UBI error: ubi_init: cannot attach mtd1
UBI error: ubi_init: UBI error: cannot initialize UBI, error -28
UBI init error -28
ERROR: failed to select 'ubifs' partition, please format it first!
resetting ...

隶笔***

这玩意儿可能悬！只有普通固件。

邪恶***

看起来BootLoader没挂,慎刷编程器固件...

mlpza***

邪恶海盗 发表于 2019-6-15 23:42
看起来BootLoader没挂,慎刷编程器固件...

我用Ft2232 做了个编程器 话说8kb的编程器固件是怎么用的

邪恶***

mlpzaq9998 发表于 2019-6-16 10:13
我用Ft2232 做了个编程器 话说8kb的编程器固件是怎么用的

你下错了吧,8KB能放啥?

mlpza***

邪恶海盗 发表于 2019-6-16 10:42
你下错了吧,8KB能放啥?

哎 就找到那一个还卖的特别贵。你能找到完整的吗

邪恶***

mlpzaq9998 发表于 2019-6-16 12:33
哎 就找到那一个还卖的特别贵。你能找到完整的吗

自己搜......

mlpza***

邪恶海盗 发表于 2019-6-16 15:31
自己搜......

搜不到......

gho***

昨天我刷了加强版,没出事,看来运气好