找回密码
 立即注册

QQ登录

只需一步,快速开始

搜索
广告投放联系QQ68610888
查看: 596|回复: 0

Realtek在ttl模式下怎么提取固件?

[复制链接]
发表于 2023-2-7 12:13 | 显示全部楼层 |阅读模式
本帖最后由 yyy8751 于 2023-2-19 21:21 编辑

路由器是磊科NW1300AC,连上了ttl获知以下信息




----------------- COMMAND MODE HELP ------------------
HELP (?)                                    : Print this help message
DB <Address> <Len>
DW <Address> <Len>
EB <Address> <Value1> <Value2>...
EW <Address> <Value1> <Value2>...
CMP: CMP <dst><src><length>
IPCONFIG:<TargetAddress>
MEMCPY:<dst><src><length>
AUTOBURN: 0/1
LOADADDR: <Load Address>
J: Jump to <TargetAddress>
NANDID: Read NAND Flash ID
NANDBE:<offset><len>
NANDSCRUB:<offset><len>
NANDPIOR:<flash_Paddress><image_addr><image_size>
NANDPIOW:<flash_Paddress><image_addr><image_size>
NANDR:<flash_Paddress><image_addr><image_size>
NANDW:<flash_Paddress><image_addr><image_size>
NANDECCGEN: <source_addr><des_addr><ecc working buffer><length in hex>
NANDBBD:<offset><len>
NANDMARKB:<offset>
MDIOR:  MDIOR phyid reg
MDIOW:  MDIOW phyid reg data
PHYR: PHYR <PHYID><reg>
PHYW: PHYW <PHYID><reg><data>
PHYPR: PHYPR <PHYID><page><reg>
PHYPW: PHYPW <PHYID><page><reg><data>
COUNTER: Dump Asic Counter
XMOD <addr>  [jump]
TI : timer init
T : test
ETH : startup Ethernet
CPUClk:
CP0
D8 <Address>
E8 <Address> <Value>
<RealTek>

------------------------------------------------------------------------------------------------

11 rtkxxpart partitions found on MTD device rtk_nand
Creating 11 MTD partitions on "rtk_nand":
0x000000000000-0x000007000000 : "ALL"
0x000000000000-0x000000500000 : "Bootloader"
0x000000500000-0x000000800000 : "Config"
0x000000800000-0x000000900000 : "Reserve"
0x000000900000-0x000000b89444 : "Kernel"
mtd: partition "Kernel" doesn't end on an erase block -- force read-only
0x000000b89444-0x000005d00000 : "RootFS"
mtd: partition "RootFS" doesn't start on an erase block boundary -- force read-only
0x000000900000-0x000005d00000 : "Kernel_RootFS"
0x000005d00000-0x000005e00000 : "Kernel_mini"
0x000006e00000-0x000006f00000 : "Parameter2"
0x000006f00000-0x000007000000 : "Parameter1"
0x000005e00000-0x000006e00000 : "Plugin"

------------------------------------------------------------------------------------------------

哪位大佬知道,告诉一下!
这个和e8820s的主控不一样,要不可以参照。


本帖子中包含更多资源

您需要 登录 才可以下载或查看,没有账号?立即注册

×
我的恩山、我的无线 The best wifi forum is right here.
您需要登录后才可以回帖 登录 | 立即注册

本版积分规则

有疑问请添加管理员QQ86788181|手机版|小黑屋|Archiver|恩山无线论坛(常州市恩山计算机开发有限公司版权所有) ( 苏ICP备05084872号 )

GMT+8, 2024-4-26 06:37

Powered by Discuz! X3.5

© 2001-2024 Discuz! Team.

| 江苏省互联网有害信息举报中心 举报信箱:js12377 | @jischina.com.cn 举报电话:025-88802724 本站不良内容举报信箱:68610888@qq.com 举报电话:0519-86695797

快速回复 返回顶部 返回列表