|
hn8145xr光纤组网,k662d直接能连接,662c网线正常,光纤无法组网,修改hw_boardinfo文件,错把obj.id = "0x00000035"的ap改为空,
登录显示华为空白界面,使用使能工具也无法进telnet,把它拆了找ttl,目前能读出数据,无法输入。数据如下。还鞥修复么?
Chip Type is SD5117P
safetycode boot type: spi nand flash
start auth startcode
InitMemoryManager.
InitMemoryManager.
Select startcodeA
PdtCerSize:0x512, PdtCerOffset:0x1134620c
InitMemoryManager.
vertify_data_by_cert der in .
ParseAsnToX509Cert in
ParseAsnToX509Cert_TBSC in
ParseAsnToX509Cert_TBSC out
ParseAsnToX509Cert out
CertSignVerify ok
InitMemoryManager.
vertify_data_by_cert_ex in .
get_rsa_by_pdt_cert_struct in .
get_rsa_by_pdt_cert_struct out .
CertSignVerify ok
Start in Statcode
startcode uboot boot count:-1669053129
Start in Safe Mode
Use the AllsytemA to load success
End out startcode
Start in U-boot
Main area: Cert partition Found
Slave area: Cert partition Found
End out U-boot
Uncompressing... done, booting...
[ 0.000000] smp_twd: clock not found -2
[ 0.160241] of_amba_device_create(): amba_device_add() failed (-2) for /sysct l@10100000
[ 0.160488] of_amba_device_create(): amba_device_add() failed (-2) for /timer 01@10104000
[ 0.161943] L2C: device tree omits to specify unified cache
[ 0.161995] L2C-310: enabling full line of zeros but not enabled in Cortex-A9
[ 0.273871] mtdoops: mtd device (mtddev=name/number) must be supplied
[ 0.841701] **** Total Boot time: 841 ms, uncompress initrd cost 0 ms ****
insmod: can't insert '/lib/modules/linux/kernel/drivers/tty/serial/serial_core.k o': No such file or directory
insmod: can't insert '/lib/modules/linux/kernel/drivers/tty/serial/8250/8250.ko' : No such file or directory
insmod: can't insert '/lib/modules/linux/kernel/drivers/tty/serial/8250/8250_dw. ko': No such file or directory
Chip Type is SD5117P
safetycode boot type: spi nand flash
start auth startcode
InitMemoryManager.
InitMemoryManager.
Select startcodeA
PdtCerSize:0x512, PdtCerOffset:0x1134620c
InitMemoryManager.
vertify_data_by_cert der in .
ParseAsnToX509Cert in
ParseAsnToX509Cert_TBSC in
ParseAsnToX509Cert_TBSC out
ParseAsnToX509Cert out
CertSignVerify ok
InitMemoryManager.
vertify_data_by_cert_ex in .
get_rsa_by_pdt_cert_struct in .
get_rsa_by_pdt_cert_struct out .
CertSignVerify ok
Start in Statcode
startcode uboot boot count:0
Start in Safe Mode
Use the AllsytemA to load success
End out startcode
Start in U-boot
Main area: Cert partition Found
Slave area: Cert partition Found
End out U-boot
Uncompressing... done, booting...
[ 0.000000] smp_twd: clock not found -2
[ 0.160269] of_amba_device_create(): amba_device_add() failed (-2) for /sysct l@10100000
[ 0.160512] of_amba_device_create(): amba_device_add() failed (-2) for /timer 01@10104000
[ 0.161960] L2C: device tree omits to specify unified cache
[ 0.162014] L2C-310: enabling full line of zeros but not enabled in Cortex-A9
[ 0.270449] mtdoops: mtd device (mtddev=name/number) must be supplied
[ 0.838364] **** Total Boot time: 838 ms, uncompress initrd cost 0 ms ****
insmod: can't insert '/lib/modules/linux/kernel/drivers/tty/serial/serial_core.k o': No such file or directory
insmod: can't insert '/lib/modules/linux/kernel/drivers/tty/serial/8250/8250.ko' : No such file or directory
insmod: can't insert '/lib/modules/linux/kernel/drivers/tty/serial/8250/8250_dw. ko': No such file or directory
|
本帖子中包含更多资源
您需要 登录 才可以下载或查看,没有账号?立即注册
×
|