【2023.7.3更新】unRAID 6.12.2 以及 6.11.5 开心支持iGPU SR-IOV、硬盘安装

三叶猫

灭魔猎人 发表于 2023-4-11 09:16
选一个非0的数字，比如4，点“ENABLE NOW”
然后去命令行输“dmesg | grep i915”、“cat /boot/config/ ...

1. root@Tower:~# dmesg | grep i915
   
2. [   45.993327] i915: loading out-of-tree module taints kernel.
   
3. [   46.130377] i915 0000:00:02.0: Running in SR-IOV PF mode
   
4. [   46.130929] i915 0000:00:02.0: [drm] VT-d active for gfx access
   
5. [   46.130959] i915 0000:00:02.0: vgaarb: deactivate vga console
   
6. [   46.130997] i915 0000:00:02.0: [drm] Using Transparent Hugepages
   
7. [   46.131608] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem
   
8. [   46.134298] i915 0000:00:02.0: [drm] Finished loading DMC firmware i915/adls_dmc_ver2_01.bin (v2.1)
   
9. [   46.799116] i915 0000:00:02.0: [drm] failed to retrieve link info, disabling eDP
   
10. [   46.807574] i915 0000:00:02.0: [drm] GuC firmware i915/tgl_guc_70.bin (70.5) is recommended, but only i915/tgl_guc_70.1.1.bin (70.1) was found
    
11. [   46.807579] i915 0000:00:02.0: [drm] Consider updating your linux-firmware pkg or downloading from https://git.kernel.org/pub/scm/linux/kernel/git/firmware/linux-firmware.git/tree/i915
    
12. [   46.822031] i915 0000:00:02.0: [drm] HuC firmware i915/tgl_huc.bin (0.0) is recommended, but only i915/tgl_huc_7.9.3.bin (7.9) was found
    
13. [   46.822035] i915 0000:00:02.0: [drm] Consider updating your linux-firmware pkg or downloading from https://git.kernel.org/pub/scm/linux/kernel/git/firmware/linux-firmware.git/tree/i915
    
14. [   46.928318] i915 0000:00:02.0: [drm] GuC error state capture buffer maybe too small: 2097152 < 2163708 (min = 721236)
    
15. [   46.930071] i915 0000:00:02.0: [drm] GuC firmware i915/tgl_guc_70.1.1.bin version 70.1.1
    
16. [   46.930074] i915 0000:00:02.0: [drm] HuC firmware i915/tgl_huc_7.9.3.bin version 7.9.3
    
17. [   46.934620] i915 0000:00:02.0: [drm] HuC authenticated
    
18. [   46.934960] i915 0000:00:02.0: [drm] GuC submission enabled
    
19. [   46.934962] i915 0000:00:02.0: [drm] GuC SLPC enabled
    
20. [   46.935253] i915 0000:00:02.0: [drm] GuC RC: enabled
    
21. [   46.936125] mei_pxp 0000:00:16.0-fbf6fcf1-96cf-4e2e-a6a6-1bab8cbe36b1: bound 0000:00:02.0 (ops i915_pxp_tee_component_ops [i915])
    
22. [   46.936297] i915 0000:00:02.0: [drm] Protected Xe Path (PXP) protected content support initialized
    
23. [   46.936920] [drm] Initialized i915 1.6.0 20201103 for 0000:00:02.0 on minor 0
    
24. [   46.944352] i915 0000:00:02.0: 7 VFs could be associated with this PF
    
25. [   46.944771] i915 0000:00:02.0: [drm] Cannot find any crtc or sizes
    
26. [   46.944857] i915 0000:00:02.0: [drm] Cannot find any crtc or sizes
    
27. [   49.146453] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=none:owns=io+mem
    
28. [   49.146539] i915 0000:00:02.1: enabling device (0000 -> 0002)
    
29. [   49.146580] i915 0000:00:02.1: Running in SR-IOV VF mode
    
30. [   49.146928] i915 0000:00:02.1: GuC interface version 0.1.0.0
    
31. [   49.147189] i915 0000:00:02.1: [drm] VT-d active for gfx access
    
32. [   49.147204] i915 0000:00:02.1: [drm] Using Transparent Hugepages
    
33. [   49.147640] i915 0000:00:02.1: GuC interface version 0.1.0.0
    
34. [   49.147809] i915 0000:00:02.1: GuC firmware PRELOADED version 1.0 submission:SR-IOV VF
    
35. [   49.147811] i915 0000:00:02.1: HuC firmware PRELOADED
    
36. [   49.149369] i915 0000:00:02.1: [drm] Protected Xe Path (PXP) protected content support initialized
    
37. [   49.149375] i915 0000:00:02.1: [drm] PMU not supported for this GPU.
    
38. [   49.149592] [drm] Initialized i915 1.6.0 20201103 for 0000:00:02.1 on minor 1
    
39. [   49.149883] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=none,decodes=none:owns=io+mem
    
40. [   49.149887] i915 0000:00:02.1: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=none:owns=none
    
41. [   49.149951] i915 0000:00:02.2: enabling device (0000 -> 0002)
    
42. [   49.149978] i915 0000:00:02.2: Running in SR-IOV VF mode
    
43. [   49.150332] i915 0000:00:02.2: GuC interface version 0.1.0.0
    
44. [   49.150949] i915 0000:00:02.2: [drm] VT-d active for gfx access
    
45. [   49.150965] i915 0000:00:02.2: [drm] Using Transparent Hugepages
    
46. [   49.151365] i915 0000:00:02.2: GuC interface version 0.1.0.0
    
47. [   49.151522] i915 0000:00:02.2: GuC firmware PRELOADED version 1.0 submission:SR-IOV VF
    
48. [   49.151524] i915 0000:00:02.2: HuC firmware PRELOADED
    
49. [   49.152972] i915 0000:00:02.2: [drm] Protected Xe Path (PXP) protected content support initialized
    
50. [   49.152977] i915 0000:00:02.2: [drm] PMU not supported for this GPU.
    
51. [   49.153023] [drm] Initialized i915 1.6.0 20201103 for 0000:00:02.2 on minor 2
    
52. [   49.153321] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=none,decodes=none:owns=io+mem
    
53. [   49.153323] i915 0000:00:02.1: vgaarb: changed VGA decodes: olddecodes=none,decodes=none:owns=none
    
54. [   49.153326] i915 0000:00:02.2: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=none:owns=none
    
55. [   49.153382] i915 0000:00:02.3: enabling device (0000 -> 0002)
    
56. [   49.153413] i915 0000:00:02.3: Running in SR-IOV VF mode
    
57. [   49.153745] i915 0000:00:02.3: GuC interface version 0.1.0.0
    
58. [   49.154023] i915 0000:00:02.3: [drm] VT-d active for gfx access
    
59. [   49.154035] i915 0000:00:02.3: [drm] Using Transparent Hugepages
    
60. [   49.154376] i915 0000:00:02.3: GuC interface version 0.1.0.0
    
61. [   49.154477] i915 0000:00:02.3: GuC firmware PRELOADED version 1.0 submission:SR-IOV VF
    
62. [   49.154480] i915 0000:00:02.3: HuC firmware PRELOADED
    
63. [   49.155848] i915 0000:00:02.3: [drm] Protected Xe Path (PXP) protected content support initialized
    
64. [   49.155854] i915 0000:00:02.3: [drm] PMU not supported for this GPU.
    
65. [   49.155936] [drm] Initialized i915 1.6.0 20201103 for 0000:00:02.3 on minor 3
    
66. [   49.156171] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=none,decodes=none:owns=io+mem
    
67. [   49.156175] i915 0000:00:02.1: vgaarb: changed VGA decodes: olddecodes=none,decodes=none:owns=none
    
68. [   49.156177] i915 0000:00:02.2: vgaarb: changed VGA decodes: olddecodes=none,decodes=none:owns=none
    
69. [   49.156180] i915 0000:00:02.3: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=none:owns=none
    
70. [   49.156258] i915 0000:00:02.4: enabling device (0000 -> 0002)
    
71. [   49.156292] i915 0000:00:02.4: Running in SR-IOV VF mode
    
72. [   49.156624] i915 0000:00:02.4: GuC interface version 0.1.0.0
    
73. [   49.156900] i915 0000:00:02.4: [drm] VT-d active for gfx access
    
74. [   49.156914] i915 0000:00:02.4: [drm] Using Transparent Hugepages
    
75. [   49.157256] i915 0000:00:02.4: GuC interface version 0.1.0.0
    
76. [   49.157356] i915 0000:00:02.4: GuC firmware PRELOADED version 1.0 submission:SR-IOV VF
    
77. [   49.157358] i915 0000:00:02.4: HuC firmware PRELOADED
    
78. [   49.158664] i915 0000:00:02.4: [drm] Protected Xe Path (PXP) protected content support initialized
    
79. [   49.158670] i915 0000:00:02.4: [drm] PMU not supported for this GPU.
    
80. [   49.158744] [drm] Initialized i915 1.6.0 20201103 for 0000:00:02.4 on minor 4
    
81. [   49.158988] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=none,decodes=none:owns=io+mem
    
82. [   49.158992] i915 0000:00:02.1: vgaarb: changed VGA decodes: olddecodes=none,decodes=none:owns=none
    
83. [   49.158994] i915 0000:00:02.2: vgaarb: changed VGA decodes: olddecodes=none,decodes=none:owns=none
    
84. [   49.158997] i915 0000:00:02.3: vgaarb: changed VGA decodes: olddecodes=none,decodes=none:owns=none
    
85. [   49.158999] i915 0000:00:02.4: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=none:owns=none
    
86. [   49.159068] i915 0000:00:02.5: enabling device (0000 -> 0002)
    
87. [   49.159093] i915 0000:00:02.5: Running in SR-IOV VF mode
    
88. [   49.159276] i915 0000:00:02.5: GuC interface version 0.1.0.0
    
89. [   49.159797] i915 0000:00:02.5: [drm] VT-d active for gfx access
    
90. [   49.159810] i915 0000:00:02.5: [drm] Using Transparent Hugepages
    
91. [   49.160100] i915 0000:00:02.5: GuC interface version 0.1.0.0
    
92. [   49.160241] i915 0000:00:02.5: GuC firmware PRELOADED version 1.0 submission:SR-IOV VF
    
93. [   49.160245] i915 0000:00:02.5: HuC firmware PRELOADED
    
94. [   49.161394] i915 0000:00:02.5: [drm] Protected Xe Path (PXP) protected content support initialized
    
95. [   49.161399] i915 0000:00:02.5: [drm] PMU not supported for this GPU.
    
96. [   49.161459] [drm] Initialized i915 1.6.0 20201103 for 0000:00:02.5 on minor 5
    
97. [   49.161759] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=none,decodes=none:owns=io+mem
    
98. [   49.161762] i915 0000:00:02.1: vgaarb: changed VGA decodes: olddecodes=none,decodes=none:owns=none
    
99. [   49.161765] i915 0000:00:02.2: vgaarb: changed VGA decodes: olddecodes=none,decodes=none:owns=none
    
100. [   49.161768] i915 0000:00:02.3: vgaarb: changed VGA decodes: olddecodes=none,decodes=none:owns=none
     
101. [   49.161770] i915 0000:00:02.4: vgaarb: changed VGA decodes: olddecodes=none,decodes=none:owns=none
     
102. [   49.161773] i915 0000:00:02.5: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=none:owns=none
     
103. [   49.161832] i915 0000:00:02.6: enabling device (0000 -> 0002)
     
104. [   49.161865] i915 0000:00:02.6: Running in SR-IOV VF mode
     
105. [   49.161917] i915 0000:00:02.6: GuC interface version 0.1.0.0
     
106. [   49.162140] i915 0000:00:02.6: [drm] VT-d active for gfx access
     
107. [   49.162154] i915 0000:00:02.6: [drm] Using Transparent Hugepages
     
108. [   49.162498] i915 0000:00:02.6: GuC interface version 0.1.0.0
     
109. [   49.162617] i915 0000:00:02.6: GuC firmware PRELOADED version 1.0 submission:SR-IOV VF
     
110. [   49.162619] i915 0000:00:02.6: HuC firmware PRELOADED
     
111. [   49.164100] i915 0000:00:02.6: [drm] Protected Xe Path (PXP) protected content support initialized
     
112. [   49.164106] i915 0000:00:02.6: [drm] PMU not supported for this GPU.
     
113. [   49.164155] [drm] Initialized i915 1.6.0 20201103 for 0000:00:02.6 on minor 6
     
114. [   49.164471] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=none,decodes=none:owns=io+mem
     
115. [   49.164474] i915 0000:00:02.1: vgaarb: changed VGA decodes: olddecodes=none,decodes=none:owns=none
     
116. [   49.164477] i915 0000:00:02.2: vgaarb: changed VGA decodes: olddecodes=none,decodes=none:owns=none
     
117. [   49.164479] i915 0000:00:02.3: vgaarb: changed VGA decodes: olddecodes=none,decodes=none:owns=none
     
118. [   49.164482] i915 0000:00:02.4: vgaarb: changed VGA decodes: olddecodes=none,decodes=none:owns=none
     
119. [   49.164485] i915 0000:00:02.5: vgaarb: changed VGA decodes: olddecodes=none,decodes=none:owns=none
     
120. [   49.164487] i915 0000:00:02.6: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=none:owns=none
     
121. [   49.164550] i915 0000:00:02.7: enabling device (0000 -> 0002)
     
122. [   49.164584] i915 0000:00:02.7: Running in SR-IOV VF mode
     
123. [   49.164637] i915 0000:00:02.7: GuC interface version 0.1.0.0
     
124. [   49.164895] i915 0000:00:02.7: [drm] VT-d active for gfx access
     
125. [   49.164908] i915 0000:00:02.7: [drm] Using Transparent Hugepages
     
126. [   49.165240] i915 0000:00:02.7: GuC interface version 0.1.0.0
     
127. [   49.165375] i915 0000:00:02.7: GuC firmware PRELOADED version 1.0 submission:SR-IOV VF
     
128. [   49.165378] i915 0000:00:02.7: HuC firmware PRELOADED
     
129. [   49.167020] i915 0000:00:02.7: [drm] Protected Xe Path (PXP) protected content support initialized
     
130. [   49.167027] i915 0000:00:02.7: [drm] PMU not supported for this GPU.
     
131. [   49.167088] [drm] Initialized i915 1.6.0 20201103 for 0000:00:02.7 on minor 7
     
132. [   49.167359] i915 0000:00:02.0: Enabled 7 VFs
     
133. root@Tower:~# cat /boot/config/plugins/i915-sriov/i915-sriov.cfg
     
134. vfnumber=7
     
135. root@Tower:~# lspci -vs 0000:00:02.0
     
136. 00:02.0 VGA compatible controller: Intel Corporation Alder Lake-S GT1 [UHD Graphics 710] (rev 0c) (prog-if 00 [VGA controller])
     
137.         DeviceName: Onboard - Video
     
138.         Subsystem: Intel Corporation Device 2212
     
139.         Flags: bus master, fast devsel, latency 0, IRQ 129, IOMMU group 1
     
140.         Memory at 6000000000 (64-bit, non-prefetchable) [size=16M]
     
141.         Memory at 4000000000 (64-bit, prefetchable) [size=256M]
     
142.         I/O ports at 4000 [size=64]
     
143.         Expansion ROM at 000c0000 [virtual] [disabled] [size=128K]
     
144.         Capabilities: [40] Vendor Specific Information: Len=0c <?>
     
145.         Capabilities: [70] Express Root Complex Integrated Endpoint, MSI 00
     
146.         Capabilities: [ac] MSI: Enable+ Count=1/1 Maskable+ 64bit-
     
147.         Capabilities: [d0] Power Management version 2
     
148.         Capabilities: [100] Process Address Space ID (PASID)
     
149.         Capabilities: [200] Address Translation Service (ATS)
     
150.         Capabilities: [300] Page Request Interface (PRI)
     
151.         Capabilities: [320] Single Root I/O Virtualization (SR-IOV)
     
152.         Kernel driver in use: i915
     
153.         Kernel modules: i915
     
154. 
     
155. root@Tower:~#
     

复制代码

这些

三叶猫

灭魔猎人 发表于 2023-4-11 09:16
选一个非0的数字，比如4，点“ENABLE NOW”
然后去命令行输“dmesg | grep i915”、“cat /boot/config/ ...

试了好多次的黑群晖，都不支持硬解，今天刚装jell，晚上我再试试能不能硬解。

灭魔猎人

三叶猫 发表于 2023-4-11 13:05
这些

你这正常开启了SR-IOV的。虚拟机黑裙不行的，群晖的内核是linux-4.4，没法支持SR-IOV

灭魔猎人

三叶猫 发表于 2023-4-11 13:45
试了好多次的黑群晖，都不支持硬解，今天刚装jell，晚上我再试试能不能硬解。

硬解可以直接unRAID装个jellyfin的docker，分配/dev/dri/目录给jellyfin容器。这样在unraid里最简单

sj526

0基础小白，好多看不懂

三叶猫

灭魔猎人 发表于 2023-4-11 13:56
你这正常开启了SR-IOV的。虚拟机黑裙不行的，群晖的内核是linux-4.4，没法支持SR-IOV

原来如此，但是我听说unRAID可以装黑裙的呀。。

灭魔猎人

三叶猫 发表于 2023-4-11 19:38
原来如此，但是我听说unRAID可以装黑裙的呀。。

装黑裙没问题，但是群晖的内核太老，对新硬件支持很差

franke

感谢分享666

sj526

老大，我第一次安装unraid，这个1.2.1版要怎么安装啊

freedomestic

感谢大佬，感谢分享.

灭魔猎人

三叶猫 发表于 2023-4-11 19:38
原来如此，但是我听说unRAID可以装黑裙的呀。。

可以装黑裙，但是黑裙里面，硬解啊、人脸识别啊等需要硬件加速的功能就没法在新硬件上启用了

三叶猫

灭魔猎人 发表于 2023-4-11 20:19
可以装黑裙，但是黑裙里面，硬解啊、人脸识别啊等需要硬件加速的功能就没法在新硬件上启用了

好吧，看好12代的核显能力才用的G7400，我忘记看什么帖子说是可以硬解，忘记是unRAID还是PVE了。

灭魔猎人

sj526 发表于 2023-4-11 20:17
老大，我第一次安装unraid，这个1.2.1版要怎么安装啊

就跟平常的unraid一样安装，没有区别。
我大概描述一下，
1. 准备好一个 U盘，一个分区软件
2. 把u盘设为gpt分区表，分一个fat32分区，卷标是UNRAID
3. 把压缩包里的所有文件解压到u盘
4. 重启电脑选择u盘启动，启动完成根据屏幕显示的IP，用局域网里的另一台电脑浏览器打开这个ip
5. 登进去unraid后，在settings->registration 里面看提示的U盘guid，复制后把u盘里config/go文件里面的uuid变量改成这个值，就行了

灭魔猎人

三叶猫 发表于 2023-4-11 20:26
好吧，看好12代的核显能力才用的G7400，我忘记看什么帖子说是可以硬解，忘记是unRAID还是PVE了。

硬解的方案很多，可以docker jellyfin；可以lxc安装Ubuntu；可以直通虚拟核显给虚拟机（虚拟机系统可以是Windows也可以是Linux），然后虚拟机里安装emby或jellyfin。就看你的规划了。

七月七日rain

感谢分享!!!