找回密码
 立即注册

QQ登录

只需一步,快速开始

搜索
广告投放联系QQ68610888
查看: 1007|回复: 4

aigital 路由器拆机 ttl uboot 信息

[复制链接]
发表于 2023-5-30 17:00 | 显示全部楼层 |阅读模式
aigital bual band WiFi repeater
CPU:5G和2.4G芯片
MT7628AN 2029-AJCSL EAP2L785
MT7612EN 2022-BMJL ETPSH552
未知芯片
CTE CT54V3211801A-25 NA2010NA
华邦:
25064JYSIQ 2032

[04040C09][04040C0C]
DDR Calibration DQS reg = 00008886
U-Boot 1.1.3 (Jan 2 2020 - 09:41:46)
Board: Ralink APSoC DRAM: 64 MB
mtest end addr: 83f31f88
relocate_code Pointer at: 83f94000
flash manufacture id: ef, device id 40 17
find flash: s25fl064k
*** Warning - bad CRC, using default environment
============================================
Build Date:Jan 2 2020 Time:09:41:46
============================================
3: System Boot system code via Flash.
## Booting image at bc050000 ...
Image Name: WK410
Image Type: MIPS Linux Kernel Image (lzma compressed)
Data Size: 1274028 Bytes = 1.2 MB
Load Address: 80000000
Entry Point: 80000000
Verifying Checksum ... OK
Uncompressing Kernel Image ... OK
No initrd
## Transferring control to Linux (at address 80000000) ...
## Giving linux memsize in MB, 64

本帖子中包含更多资源

您需要 登录 才可以下载或查看,没有账号?立即注册

×
我的恩山、我的无线 The best wifi forum is right here.
 楼主| 发表于 2023-5-30 17:02 | 显示全部楼层
USB TO TTL 设置信息:

白色gnd,红色rx,黄色tx,
波特率57600
我的恩山、我的无线 The best wifi forum is right here.
回复

使用道具 举报

 楼主| 发表于 2023-5-30 18:04 | 显示全部楼层
[04040C08][04040C0A]
DDR Calibration DQS reg = 00008786


U-Boot 1.1.3 (Jan  2 2020 - 09:41:46)

Board: Ralink APSoC DRAM:  64 MB
mtest end addr: 83f31f88
relocate_code Pointer at: 83f94000
[04040C08][04040C0B]
DDR Calibration DQS reg = 00008786


U-Boot 1.1.3 (Jan  2 2020 - 09:41:46)

Board: Ralink APSoC DRAM:  64 MB
mtest end addr: 83f31f88
relocate_code Pointer at: 83f94000
flash manufacture id: ef, device id 40 17
find flash: s25fl064k
*** Warning - bad CRC, using default environment

============================================
Build Date:Jan  2 2020  Time:09:41:46
============================================
   
3: System Boot system code via Flash.
## Booting image at bc050000 ...
   Image Name:   WK410
   Image Type:   MIPS Linux Kernel Image (lzma compressed)
   Data Size:    1274028 Bytes =  1.2 MB
   Load Address: 80000000
   Entry Point:  80000000
   Verifying Checksum ... OK
   Uncompressing Kernel Image ... OK
No initrd
## Transferring control to Linux (at address 80000000) ...
## Giving linux memsize in MB, 64

Starting kernel ...

[    0.000000] Linux version 4.4.186 (junleng@junlengdeMacBook-Pro-2.local) (gcc version 5.4.0 (LEDE GCC 5.4.0 1.3.1) ) #0 Mon Jun 1 08:56:03 2020
[    0.000000] Board has DDR2
[    0.000000] Analog PMU set to hw control
[    0.000000] Digital PMU set to hw control
[    0.000000] SoC Type: MediaTek MT7628AN ver:1 eco:2
[    0.000000] bootconsole [early0] enabled
[    0.000000] CPU0 revision is: 00019655 (MIPS 24KEc)
[    0.000000] MIPS: machine is LEDE WK410 board
[    0.000000] Determined physical RAM map:
[    0.000000]  memory: 04000000 @ 00000000 (usable)
[    0.000000] Initrd not found or empty - disabling initrd
[    0.000000] Zone ranges:
[    0.000000]   Normal   [mem 0x0000000000000000-0x0000000003ffffff]
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000000000-0x0000000003ffffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x0000000003ffffff]
[    0.000000] Primary instruction cache 64kB, VIPT, 4-way, linesize 32 bytes.
[    0.000000] Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 16256
[    0.000000] Kernel command line: console=ttyS0,57600 rootfstype=squashfs,jffs2
[    0.000000] PID hash table entries: 256 (order: -2, 1024 bytes)
[    0.000000] Dentry cache hash table entries: 8192 (order: 3, 32768 bytes)
[    0.000000] Inode-cache hash table entries: 4096 (order: 2, 16384 bytes)
[    0.000000] Writing ErrCtl register=000717de
[    0.000000] Readback ErrCtl register=000717de
[    0.000000] Memory: 60848K/65536K available (2858K kernel code, 138K rwdata, 680K rodata, 156K init, 185K bss, 4688K reserved, 0K cma-reserved)
[    0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[    0.000000] NR_IRQS:256
[    0.000000] intc: using register map from devicetree
[    0.000000] CPU Clock: 580MHz
[    0.000000] clocksource_probe: no matching clocksources found
[    0.000000] clocksource: MIPS: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6590553264 ns
[    0.000010] sched_clock: 32 bits at 290MHz, resolution 3ns, wraps every 7405115902ns
[    0.015358] Calibrating delay loop... 385.84 BogoMIPS (lpj=1929216)
[    0.080518] pid_max: default: 32768 minimum: 301
[    0.089747] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.102715] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.122339] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[    0.141728] futex hash table entries: 256 (order: -1, 3072 bytes)
[    0.153860] pinctrl core: initialized pinctrl subsystem
[    0.164779] NET: Registered protocol family 16
[    0.277925] mt7620-pci 10140000.pcie: Port 0 N_FTS = 1b105000
[    0.438925] PCI host bridge /pcie@10140000 ranges:
[    0.448260]  MEM 0x0000000020000000..0x000000002fffffff
[    0.458571]   IO 0x0000000010160000..0x000000001016ffff
[    0.481932] mt7621_gpio 10000600.gpio: registering 32 gpios
[    0.493013] mt7621_gpio 10000600.gpio: registering 32 gpios
[    0.504005] mt7621_gpio 10000600.gpio: registering 32 gpios
[    0.515634] PCI host bridge to bus 0000:00
[    0.523597] pci_bus 0000:00: root bus resource [mem 0x20000000-0x2fffffff]
[    0.537218] pci_bus 0000:00: root bus resource [io  0xffffffff]
[    0.548881] pci_bus 0000:00: root bus resource [??? 0x00000000 flags 0x0]
[    0.562296] pci_bus 0000:00: No busn resource found for root bus, will use [bus 00-ff]
[    0.578396] pci 0000:00:00.0: bridge configuration invalid ([bus 00-00]), reconfiguring
[    0.594800] pci 0000:00:00.0: BAR 0: no space for [mem size 0x80000000]
[    0.607774] pci 0000:00:00.0: BAR 0: failed to assign [mem size 0x80000000]
[    0.621507] pci 0000:00:00.0: BAR 8: assigned [mem 0x20000000-0x200fffff]
[    0.634925] pci 0000:00:00.0: BAR 9: assigned [mem 0x20100000-0x201fffff pref]
[    0.649200] pci 0000:00:00.0: BAR 1: assigned [mem 0x20200000-0x2020ffff]
[    0.662629] pci 0000:01:00.0: BAR 0: assigned [mem 0x20000000-0x200fffff 64bit]
[    0.677082] pci 0000:01:00.0: BAR 6: assigned [mem 0x20100000-0x2010ffff pref]
[    0.691338] pci 0000:00:00.0: PCI bridge to [bus 01]
[    0.701135] pci 0000:00:00.0:   bridge window [mem 0x20000000-0x200fffff]
[    0.714556] pci 0000:00:00.0:   bridge window [mem 0x20100000-0x201fffff pref]
[    0.728846] pci 0000:00:00.0: card - bus=0x0, slot = 0x0 irq=0
[    0.740361] pci 0000:01:00.0: card - bus=0x1, slot = 0x0 irq=4
[    0.752797] clocksource: Switched to clocksource MIPS
[    0.764207] NET: Registered protocol family 2
[    0.773581] TCP established hash table entries: 1024 (order: 0, 4096 bytes)
[    0.787290] TCP bind hash table entries: 1024 (order: 0, 4096 bytes)
[    0.799798] TCP: Hash tables configured (established 1024 bind 1024)
[    0.812448] UDP hash table entries: 256 (order: 0, 4096 bytes)
[    0.823908] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
[    0.836571] NET: Registered protocol family 1
[    0.851232] Crashlog allocated RAM at address 0x3f00000
[    0.877922] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    0.889392] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
[    0.911507] io scheduler noop registered
[    0.919184] io scheduler deadline registered (default)
[    0.930107] Serial: 8250/16550 driver, 3 ports, IRQ sharing disabled
[    0.943797] console [ttyS0] disabled
[    0.950754] 10000c00.uartlite: ttyS0 at MMIO 0x10000c00 (irq = 28, base_baud = 2500000) is a 16550A
[    0.968685] console [ttyS0] enabled
[    0.968685] console [ttyS0] enabled
[    0.982376] bootconsole [early0] disabled
[    0.982376] bootconsole [early0] disabled
[    0.998930] mtdsplit_uimage: mtk: generic
[    1.007562] spi-mt7621 10000b00.spi: sys_freq: 193333333
[    1.022275] m25p80 spi32766.0: using chunked io (size=32)
[    1.033041] m25p80 spi32766.0: s25fl064k (8192 Kbytes)
[    1.043249] flash id(spi32766.0): 2D146C43943860DF
[    1.052777] 6 ofpart partitions found on MTD device spi32766.0
[    1.064336] Creating 6 MTD partitions on "spi32766.0":
[    1.074515] 0x000000000000-0x000000030000 : "u-boot"
[    1.086081] 0x000000030000-0x000000040000 : "kpanic"
[    1.097811] 0x000000040000-0x000000050000 : "factory"
[    1.109680] 0x0000007e0000-0x0000007f0000 : "ledeinfo"
[    1.194733] 0x0000007f0000-0x000000800000 : "reserve"
[    1.206650] 0x000000050000-0x0000007e0000 : "firmware"
[    1.219145] 2 uimage-fw partitions found on MTD device firmware
[    1.230963] 0x000000050000-0x0000001870ec : "kernel"
[    1.242526] 0x0000001870ec-0x0000007e0000 : "rootfs"
[    1.254247] mtd: device 7 (rootfs) set to be root filesystem
[    1.265618] 1 squashfs-split partitions found on MTD device rootfs
[    1.277875] 0x0000005c0000-0x0000007e0000 : "rootfs_data"
[    1.307286] rt3050-esw 10110000.esw: link changed 0x00
[    1.319398] mtk_soc_eth 10100000.ethernet eth0: mediatek frame engine at 0xb0100000, irq 5
[    1.336305] mt7621_wdt 10000120.watchdog: Initialized
[    1.346918] NET: Registered protocol family 17
[    1.355854] bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this.
[    1.380852] 8021q: 802.1Q VLAN Support v1.8
[    1.400850] VFS: Mounted root (squashfs filesystem) readonly on device 31:7.
[    1.415731] Freeing unused kernel memory: 156K
[    2.907724] init: Console is alive
[    2.914778] init: - watchdog -
[    4.823033] kmodloader: loading kernel modules from /etc/modules-boot.d/*
[    4.836862] kmodloader: done loading kernel modules from /etc/modules-boot.d/*
[    4.861664] init: - preinit -
[    5.407419] random: procd: uninitialized urandom read (4 bytes read, 8 bits of entropy available)
[    5.727853] jffs2: notice: (281) jffs2_build_xattr_subsystem: complete building xattr subsystem, 0 of xdatum (0 unchecked, 0 orphan) and 0 of xref (0 dead, 0 orphan) found.
[    5.760297] mount_root: switching to jffs2 overlay
[    5.779839] urandom-seed: Seeding with /etc/urandom.seed
LEDE Starting
[    6.050272] procd: - early -
[    6.056841] procd: - watchdog -
[    6.698415] procd: - watchdog -
[    6.710076] procd: - ubus -
[    7.164225] random: ubusd: uninitialized urandom read (4 bytes read, 11 bits of entropy available)
[    7.321360] random: ubusd: uninitialized urandom read (4 bytes read, 11 bits of entropy available)
[    7.339503] random: ubusd: uninitialized urandom read (4 bytes read, 11 bits of entropy available)
[    7.357863] random: ubusd: uninitialized urandom read (4 bytes read, 11 bits of entropy available)
[    7.375755] random: ubusd: uninitialized urandom read (4 bytes read, 11 bits of entropy available)
[    7.394107] random: ubusd: uninitialized urandom read (4 bytes read, 11 bits of entropy available)
[    7.411964] random: ubusd: uninitialized urandom read (4 bytes read, 11 bits of entropy available)
[    7.429929] random: ubusd: uninitialized urandom read (4 bytes read, 11 bits of entropy available)
[    7.448541] random: ubusd: uninitialized urandom read (4 bytes read, 11 bits of entropy available)
[    7.466797] procd: - init -
[    7.952041] kmodloader: loading kernel modules from /etc/modules.d/*
[    8.050713] zram: Added device: zram0
[    8.076793] Netfilter messages via NETLINK v0.30.
[    8.095049] ip_set: protocol 6
[    8.907126] MT7628 module init
[    8.922596] MT7628 AP Driver version-4.0.1.3.P1
[    8.931643] load: mtk/WIFI_RAM_CODE_MT7628_e2.bin
[    9.082705] E2pAccessMode=2
[    9.987575] MT7612E module init
[   10.008239] MT76x2 AP Driver version-3.0.4.0.P1.20150909
[   10.737372] ip_tables: (C) 2000-2006 Netfilter Core Team
[   10.767007] nf_conntrack version 0.5.0 (953 buckets, 3812 max)
[   10.831321] ctnetlink v0.93: registering with nfnetlink.
[   10.863785] nf_conntrack_rtsp v0.7 loading
[   10.929506] nf_nat_rtsp v0.7 loading
[   10.990807] xt_time: kernel timezone is -0000
[   11.018111] PPP generic driver version 2.4.2
[   11.029604] NET: Registered protocol family 24
[   11.044456] kmodloader: done loading kernel modules from /etc/modules.d/*
[   16.661906] rt3050-esw 10110000.esw: link changed 0x00
[   18.744533] device eth0.1 entered promiscuous mode
[   18.754124] device eth0 entered promiscuous mode
[   18.796061] br-lan: port 1(eth0.1) entered forwarding state
[   18.807204] br-lan: port 1(eth0.1) entered forwarding state
[   20.802851] br-lan: port 1(eth0.1) entered forwarding state
[   21.854477] S95done (1247): drop_caches: 3
[   25.675974] device rai0 entered promiscuous mode
[   25.685256] br-lan: port 2(rai0) entered forwarding state
[   25.695986] br-lan: port 2(rai0) entered forwarding state
[   27.692870] br-lan: port 2(rai0) entered forwarding state
[   28.450488] device ra0 entered promiscuous mode
[   28.459607] br-lan: port 3(ra0) entered forwarding state
[   28.470161] br-lan: port 3(ra0) entered forwarding state
[   30.462806] br-lan: port 3(ra0) entered forwarding state
[   45.488308] random: nonblocking pool is initialized
我的恩山、我的无线 The best wifi forum is right here.
回复

使用道具 举报

 楼主| 发表于 2023-5-30 18:04 | 显示全部楼层
[04040C08][04040C0A]
DDR Calibration DQS reg = 00008786


U-Boot 1.1.3 (Jan  2 2020 - 09:41:46)

Board: Ralink APSoC DRAM:  64 MB
mtest end addr: 83f31f88
relocate_code Pointer at: 83f94000
[04040C08][04040C0B]
DDR Calibration DQS reg = 00008786


U-Boot 1.1.3 (Jan  2 2020 - 09:41:46)

Board: Ralink APSoC DRAM:  64 MB
mtest end addr: 83f31f88
relocate_code Pointer at: 83f94000
flash manufacture id: ef, device id 40 17
find flash: s25fl064k
*** Warning - bad CRC, using default environment

============================================
Build Date:Jan  2 2020  Time:09:41:46
============================================
   
3: System Boot system code via Flash.
## Booting image at bc050000 ...
   Image Name:   WK410
   Image Type:   MIPS Linux Kernel Image (lzma compressed)
   Data Size:    1274028 Bytes =  1.2 MB
   Load Address: 80000000
   Entry Point:  80000000
   Verifying Checksum ... OK
   Uncompressing Kernel Image ... OK
No initrd
## Transferring control to Linux (at address 80000000) ...
## Giving linux memsize in MB, 64

Starting kernel ...

[    0.000000] Linux version 4.4.186 (junleng@junlengdeMacBook-Pro-2.local) (gcc version 5.4.0 (LEDE GCC 5.4.0 1.3.1) ) #0 Mon Jun 1 08:56:03 2020
[    0.000000] Board has DDR2
[    0.000000] Analog PMU set to hw control
[    0.000000] Digital PMU set to hw control
[    0.000000] SoC Type: MediaTek MT7628AN ver:1 eco:2
[    0.000000] bootconsole [early0] enabled
[    0.000000] CPU0 revision is: 00019655 (MIPS 24KEc)
[    0.000000] MIPS: machine is LEDE WK410 board
[    0.000000] Determined physical RAM map:
[    0.000000]  memory: 04000000 @ 00000000 (usable)
[    0.000000] Initrd not found or empty - disabling initrd
[    0.000000] Zone ranges:
[    0.000000]   Normal   [mem 0x0000000000000000-0x0000000003ffffff]
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000000000-0x0000000003ffffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x0000000003ffffff]
[    0.000000] Primary instruction cache 64kB, VIPT, 4-way, linesize 32 bytes.
[    0.000000] Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 16256
[    0.000000] Kernel command line: console=ttyS0,57600 rootfstype=squashfs,jffs2
[    0.000000] PID hash table entries: 256 (order: -2, 1024 bytes)
[    0.000000] Dentry cache hash table entries: 8192 (order: 3, 32768 bytes)
[    0.000000] Inode-cache hash table entries: 4096 (order: 2, 16384 bytes)
[    0.000000] Writing ErrCtl register=000717de
[    0.000000] Readback ErrCtl register=000717de
[    0.000000] Memory: 60848K/65536K available (2858K kernel code, 138K rwdata, 680K rodata, 156K init, 185K bss, 4688K reserved, 0K cma-reserved)
[    0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[    0.000000] NR_IRQS:256
[    0.000000] intc: using register map from devicetree
[    0.000000] CPU Clock: 580MHz
[    0.000000] clocksource_probe: no matching clocksources found
[    0.000000] clocksource: MIPS: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6590553264 ns
[    0.000010] sched_clock: 32 bits at 290MHz, resolution 3ns, wraps every 7405115902ns
[    0.015358] Calibrating delay loop... 385.84 BogoMIPS (lpj=1929216)
[    0.080518] pid_max: default: 32768 minimum: 301
[    0.089747] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.102715] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.122339] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[    0.141728] futex hash table entries: 256 (order: -1, 3072 bytes)
[    0.153860] pinctrl core: initialized pinctrl subsystem
[    0.164779] NET: Registered protocol family 16
[    0.277925] mt7620-pci 10140000.pcie: Port 0 N_FTS = 1b105000
[    0.438925] PCI host bridge /pcie@10140000 ranges:
[    0.448260]  MEM 0x0000000020000000..0x000000002fffffff
[    0.458571]   IO 0x0000000010160000..0x000000001016ffff
[    0.481932] mt7621_gpio 10000600.gpio: registering 32 gpios
[    0.493013] mt7621_gpio 10000600.gpio: registering 32 gpios
[    0.504005] mt7621_gpio 10000600.gpio: registering 32 gpios
[    0.515634] PCI host bridge to bus 0000:00
[    0.523597] pci_bus 0000:00: root bus resource [mem 0x20000000-0x2fffffff]
[    0.537218] pci_bus 0000:00: root bus resource [io  0xffffffff]
[    0.548881] pci_bus 0000:00: root bus resource [??? 0x00000000 flags 0x0]
[    0.562296] pci_bus 0000:00: No busn resource found for root bus, will use [bus 00-ff]
[    0.578396] pci 0000:00:00.0: bridge configuration invalid ([bus 00-00]), reconfiguring
[    0.594800] pci 0000:00:00.0: BAR 0: no space for [mem size 0x80000000]
[    0.607774] pci 0000:00:00.0: BAR 0: failed to assign [mem size 0x80000000]
[    0.621507] pci 0000:00:00.0: BAR 8: assigned [mem 0x20000000-0x200fffff]
[    0.634925] pci 0000:00:00.0: BAR 9: assigned [mem 0x20100000-0x201fffff pref]
[    0.649200] pci 0000:00:00.0: BAR 1: assigned [mem 0x20200000-0x2020ffff]
[    0.662629] pci 0000:01:00.0: BAR 0: assigned [mem 0x20000000-0x200fffff 64bit]
[    0.677082] pci 0000:01:00.0: BAR 6: assigned [mem 0x20100000-0x2010ffff pref]
[    0.691338] pci 0000:00:00.0: PCI bridge to [bus 01]
[    0.701135] pci 0000:00:00.0:   bridge window [mem 0x20000000-0x200fffff]
[    0.714556] pci 0000:00:00.0:   bridge window [mem 0x20100000-0x201fffff pref]
[    0.728846] pci 0000:00:00.0: card - bus=0x0, slot = 0x0 irq=0
[    0.740361] pci 0000:01:00.0: card - bus=0x1, slot = 0x0 irq=4
[    0.752797] clocksource: Switched to clocksource MIPS
[    0.764207] NET: Registered protocol family 2
[    0.773581] TCP established hash table entries: 1024 (order: 0, 4096 bytes)
[    0.787290] TCP bind hash table entries: 1024 (order: 0, 4096 bytes)
[    0.799798] TCP: Hash tables configured (established 1024 bind 1024)
[    0.812448] UDP hash table entries: 256 (order: 0, 4096 bytes)
[    0.823908] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
[    0.836571] NET: Registered protocol family 1
[    0.851232] Crashlog allocated RAM at address 0x3f00000
[    0.877922] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    0.889392] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
[    0.911507] io scheduler noop registered
[    0.919184] io scheduler deadline registered (default)
[    0.930107] Serial: 8250/16550 driver, 3 ports, IRQ sharing disabled
[    0.943797] console [ttyS0] disabled
[    0.950754] 10000c00.uartlite: ttyS0 at MMIO 0x10000c00 (irq = 28, base_baud = 2500000) is a 16550A
[    0.968685] console [ttyS0] enabled
[    0.968685] console [ttyS0] enabled
[    0.982376] bootconsole [early0] disabled
[    0.982376] bootconsole [early0] disabled
[    0.998930] mtdsplit_uimage: mtk: generic
[    1.007562] spi-mt7621 10000b00.spi: sys_freq: 193333333
[    1.022275] m25p80 spi32766.0: using chunked io (size=32)
[    1.033041] m25p80 spi32766.0: s25fl064k (8192 Kbytes)
[    1.043249] flash id(spi32766.0): 2D146C43943860DF
[    1.052777] 6 ofpart partitions found on MTD device spi32766.0
[    1.064336] Creating 6 MTD partitions on "spi32766.0":
[    1.074515] 0x000000000000-0x000000030000 : "u-boot"
[    1.086081] 0x000000030000-0x000000040000 : "kpanic"
[    1.097811] 0x000000040000-0x000000050000 : "factory"
[    1.109680] 0x0000007e0000-0x0000007f0000 : "ledeinfo"
[    1.194733] 0x0000007f0000-0x000000800000 : "reserve"
[    1.206650] 0x000000050000-0x0000007e0000 : "firmware"
[    1.219145] 2 uimage-fw partitions found on MTD device firmware
[    1.230963] 0x000000050000-0x0000001870ec : "kernel"
[    1.242526] 0x0000001870ec-0x0000007e0000 : "rootfs"
[    1.254247] mtd: device 7 (rootfs) set to be root filesystem
[    1.265618] 1 squashfs-split partitions found on MTD device rootfs
[    1.277875] 0x0000005c0000-0x0000007e0000 : "rootfs_data"
[    1.307286] rt3050-esw 10110000.esw: link changed 0x00
[    1.319398] mtk_soc_eth 10100000.ethernet eth0: mediatek frame engine at 0xb0100000, irq 5
[    1.336305] mt7621_wdt 10000120.watchdog: Initialized
[    1.346918] NET: Registered protocol family 17
[    1.355854] bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this.
[    1.380852] 8021q: 802.1Q VLAN Support v1.8
[    1.400850] VFS: Mounted root (squashfs filesystem) readonly on device 31:7.
[    1.415731] Freeing unused kernel memory: 156K
[    2.907724] init: Console is alive
[    2.914778] init: - watchdog -
[    4.823033] kmodloader: loading kernel modules from /etc/modules-boot.d/*
[    4.836862] kmodloader: done loading kernel modules from /etc/modules-boot.d/*
[    4.861664] init: - preinit -
[    5.407419] random: procd: uninitialized urandom read (4 bytes read, 8 bits of entropy available)
[    5.727853] jffs2: notice: (281) jffs2_build_xattr_subsystem: complete building xattr subsystem, 0 of xdatum (0 unchecked, 0 orphan) and 0 of xref (0 dead, 0 orphan) found.
[    5.760297] mount_root: switching to jffs2 overlay
[    5.779839] urandom-seed: Seeding with /etc/urandom.seed
LEDE Starting
[    6.050272] procd: - early -
[    6.056841] procd: - watchdog -
[    6.698415] procd: - watchdog -
[    6.710076] procd: - ubus -
[    7.164225] random: ubusd: uninitialized urandom read (4 bytes read, 11 bits of entropy available)
[    7.321360] random: ubusd: uninitialized urandom read (4 bytes read, 11 bits of entropy available)
[    7.339503] random: ubusd: uninitialized urandom read (4 bytes read, 11 bits of entropy available)
[    7.357863] random: ubusd: uninitialized urandom read (4 bytes read, 11 bits of entropy available)
[    7.375755] random: ubusd: uninitialized urandom read (4 bytes read, 11 bits of entropy available)
[    7.394107] random: ubusd: uninitialized urandom read (4 bytes read, 11 bits of entropy available)
[    7.411964] random: ubusd: uninitialized urandom read (4 bytes read, 11 bits of entropy available)
[    7.429929] random: ubusd: uninitialized urandom read (4 bytes read, 11 bits of entropy available)
[    7.448541] random: ubusd: uninitialized urandom read (4 bytes read, 11 bits of entropy available)
[    7.466797] procd: - init -
[    7.952041] kmodloader: loading kernel modules from /etc/modules.d/*
[    8.050713] zram: Added device: zram0
[    8.076793] Netfilter messages via NETLINK v0.30.
[    8.095049] ip_set: protocol 6
[    8.907126] MT7628 module init
[    8.922596] MT7628 AP Driver version-4.0.1.3.P1
[    8.931643] load: mtk/WIFI_RAM_CODE_MT7628_e2.bin
[    9.082705] E2pAccessMode=2
[    9.987575] MT7612E module init
[   10.008239] MT76x2 AP Driver version-3.0.4.0.P1.20150909
[   10.737372] ip_tables: (C) 2000-2006 Netfilter Core Team
[   10.767007] nf_conntrack version 0.5.0 (953 buckets, 3812 max)
[   10.831321] ctnetlink v0.93: registering with nfnetlink.
[   10.863785] nf_conntrack_rtsp v0.7 loading
[   10.929506] nf_nat_rtsp v0.7 loading
[   10.990807] xt_time: kernel timezone is -0000
[   11.018111] PPP generic driver version 2.4.2
[   11.029604] NET: Registered protocol family 24
[   11.044456] kmodloader: done loading kernel modules from /etc/modules.d/*
[   16.661906] rt3050-esw 10110000.esw: link changed 0x00
[   18.744533] device eth0.1 entered promiscuous mode
[   18.754124] device eth0 entered promiscuous mode
[   18.796061] br-lan: port 1(eth0.1) entered forwarding state
[   18.807204] br-lan: port 1(eth0.1) entered forwarding state
[   20.802851] br-lan: port 1(eth0.1) entered forwarding state
[   21.854477] S95done (1247): drop_caches: 3
[   25.675974] device rai0 entered promiscuous mode
[   25.685256] br-lan: port 2(rai0) entered forwarding state
[   25.695986] br-lan: port 2(rai0) entered forwarding state
[   27.692870] br-lan: port 2(rai0) entered forwarding state
[   28.450488] device ra0 entered promiscuous mode
[   28.459607] br-lan: port 3(ra0) entered forwarding state
[   28.470161] br-lan: port 3(ra0) entered forwarding state
[   30.462806] br-lan: port 3(ra0) entered forwarding state
[   45.488308] random: nonblocking pool is initialized
我的恩山、我的无线 The best wifi forum is right here.
回复

使用道具 举报

 楼主| 发表于 2023-5-30 18:04 | 显示全部楼层
[04040C08][04040C0A]
DDR Calibration DQS reg = 00008786


U-Boot 1.1.3 (Jan  2 2020 - 09:41:46)

Board: Ralink APSoC DRAM:  64 MB
mtest end addr: 83f31f88
relocate_code Pointer at: 83f94000
[04040C08][04040C0B]
DDR Calibration DQS reg = 00008786


U-Boot 1.1.3 (Jan  2 2020 - 09:41:46)

Board: Ralink APSoC DRAM:  64 MB
mtest end addr: 83f31f88
relocate_code Pointer at: 83f94000
flash manufacture id: ef, device id 40 17
find flash: s25fl064k
*** Warning - bad CRC, using default environment

============================================
Build Date:Jan  2 2020  Time:09:41:46
============================================
   
3: System Boot system code via Flash.
## Booting image at bc050000 ...
   Image Name:   WK410
   Image Type:   MIPS Linux Kernel Image (lzma compressed)
   Data Size:    1274028 Bytes =  1.2 MB
   Load Address: 80000000
   Entry Point:  80000000
   Verifying Checksum ... OK
   Uncompressing Kernel Image ... OK
No initrd
## Transferring control to Linux (at address 80000000) ...
## Giving linux memsize in MB, 64

Starting kernel ...

[    0.000000] Linux version 4.4.186 (junleng@junlengdeMacBook-Pro-2.local) (gcc version 5.4.0 (LEDE GCC 5.4.0 1.3.1) ) #0 Mon Jun 1 08:56:03 2020
[    0.000000] Board has DDR2
[    0.000000] Analog PMU set to hw control
[    0.000000] Digital PMU set to hw control
[    0.000000] SoC Type: MediaTek MT7628AN ver:1 eco:2
[    0.000000] bootconsole [early0] enabled
[    0.000000] CPU0 revision is: 00019655 (MIPS 24KEc)
[    0.000000] MIPS: machine is LEDE WK410 board
[    0.000000] Determined physical RAM map:
[    0.000000]  memory: 04000000 @ 00000000 (usable)
[    0.000000] Initrd not found or empty - disabling initrd
[    0.000000] Zone ranges:
[    0.000000]   Normal   [mem 0x0000000000000000-0x0000000003ffffff]
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000000000-0x0000000003ffffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x0000000003ffffff]
[    0.000000] Primary instruction cache 64kB, VIPT, 4-way, linesize 32 bytes.
[    0.000000] Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 16256
[    0.000000] Kernel command line: console=ttyS0,57600 rootfstype=squashfs,jffs2
[    0.000000] PID hash table entries: 256 (order: -2, 1024 bytes)
[    0.000000] Dentry cache hash table entries: 8192 (order: 3, 32768 bytes)
[    0.000000] Inode-cache hash table entries: 4096 (order: 2, 16384 bytes)
[    0.000000] Writing ErrCtl register=000717de
[    0.000000] Readback ErrCtl register=000717de
[    0.000000] Memory: 60848K/65536K available (2858K kernel code, 138K rwdata, 680K rodata, 156K init, 185K bss, 4688K reserved, 0K cma-reserved)
[    0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[    0.000000] NR_IRQS:256
[    0.000000] intc: using register map from devicetree
[    0.000000] CPU Clock: 580MHz
[    0.000000] clocksource_probe: no matching clocksources found
[    0.000000] clocksource: MIPS: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6590553264 ns
[    0.000010] sched_clock: 32 bits at 290MHz, resolution 3ns, wraps every 7405115902ns
[    0.015358] Calibrating delay loop... 385.84 BogoMIPS (lpj=1929216)
[    0.080518] pid_max: default: 32768 minimum: 301
[    0.089747] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.102715] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.122339] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[    0.141728] futex hash table entries: 256 (order: -1, 3072 bytes)
[    0.153860] pinctrl core: initialized pinctrl subsystem
[    0.164779] NET: Registered protocol family 16
[    0.277925] mt7620-pci 10140000.pcie: Port 0 N_FTS = 1b105000
[    0.438925] PCI host bridge /pcie@10140000 ranges:
[    0.448260]  MEM 0x0000000020000000..0x000000002fffffff
[    0.458571]   IO 0x0000000010160000..0x000000001016ffff
[    0.481932] mt7621_gpio 10000600.gpio: registering 32 gpios
[    0.493013] mt7621_gpio 10000600.gpio: registering 32 gpios
[    0.504005] mt7621_gpio 10000600.gpio: registering 32 gpios
[    0.515634] PCI host bridge to bus 0000:00
[    0.523597] pci_bus 0000:00: root bus resource [mem 0x20000000-0x2fffffff]
[    0.537218] pci_bus 0000:00: root bus resource [io  0xffffffff]
[    0.548881] pci_bus 0000:00: root bus resource [??? 0x00000000 flags 0x0]
[    0.562296] pci_bus 0000:00: No busn resource found for root bus, will use [bus 00-ff]
[    0.578396] pci 0000:00:00.0: bridge configuration invalid ([bus 00-00]), reconfiguring
[    0.594800] pci 0000:00:00.0: BAR 0: no space for [mem size 0x80000000]
[    0.607774] pci 0000:00:00.0: BAR 0: failed to assign [mem size 0x80000000]
[    0.621507] pci 0000:00:00.0: BAR 8: assigned [mem 0x20000000-0x200fffff]
[    0.634925] pci 0000:00:00.0: BAR 9: assigned [mem 0x20100000-0x201fffff pref]
[    0.649200] pci 0000:00:00.0: BAR 1: assigned [mem 0x20200000-0x2020ffff]
[    0.662629] pci 0000:01:00.0: BAR 0: assigned [mem 0x20000000-0x200fffff 64bit]
[    0.677082] pci 0000:01:00.0: BAR 6: assigned [mem 0x20100000-0x2010ffff pref]
[    0.691338] pci 0000:00:00.0: PCI bridge to [bus 01]
[    0.701135] pci 0000:00:00.0:   bridge window [mem 0x20000000-0x200fffff]
[    0.714556] pci 0000:00:00.0:   bridge window [mem 0x20100000-0x201fffff pref]
[    0.728846] pci 0000:00:00.0: card - bus=0x0, slot = 0x0 irq=0
[    0.740361] pci 0000:01:00.0: card - bus=0x1, slot = 0x0 irq=4
[    0.752797] clocksource: Switched to clocksource MIPS
[    0.764207] NET: Registered protocol family 2
[    0.773581] TCP established hash table entries: 1024 (order: 0, 4096 bytes)
[    0.787290] TCP bind hash table entries: 1024 (order: 0, 4096 bytes)
[    0.799798] TCP: Hash tables configured (established 1024 bind 1024)
[    0.812448] UDP hash table entries: 256 (order: 0, 4096 bytes)
[    0.823908] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
[    0.836571] NET: Registered protocol family 1
[    0.851232] Crashlog allocated RAM at address 0x3f00000
[    0.877922] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    0.889392] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
[    0.911507] io scheduler noop registered
[    0.919184] io scheduler deadline registered (default)
[    0.930107] Serial: 8250/16550 driver, 3 ports, IRQ sharing disabled
[    0.943797] console [ttyS0] disabled
[    0.950754] 10000c00.uartlite: ttyS0 at MMIO 0x10000c00 (irq = 28, base_baud = 2500000) is a 16550A
[    0.968685] console [ttyS0] enabled
[    0.968685] console [ttyS0] enabled
[    0.982376] bootconsole [early0] disabled
[    0.982376] bootconsole [early0] disabled
[    0.998930] mtdsplit_uimage: mtk: generic
[    1.007562] spi-mt7621 10000b00.spi: sys_freq: 193333333
[    1.022275] m25p80 spi32766.0: using chunked io (size=32)
[    1.033041] m25p80 spi32766.0: s25fl064k (8192 Kbytes)
[    1.043249] flash id(spi32766.0): 2D146C43943860DF
[    1.052777] 6 ofpart partitions found on MTD device spi32766.0
[    1.064336] Creating 6 MTD partitions on "spi32766.0":
[    1.074515] 0x000000000000-0x000000030000 : "u-boot"
[    1.086081] 0x000000030000-0x000000040000 : "kpanic"
[    1.097811] 0x000000040000-0x000000050000 : "factory"
[    1.109680] 0x0000007e0000-0x0000007f0000 : "ledeinfo"
[    1.194733] 0x0000007f0000-0x000000800000 : "reserve"
[    1.206650] 0x000000050000-0x0000007e0000 : "firmware"
[    1.219145] 2 uimage-fw partitions found on MTD device firmware
[    1.230963] 0x000000050000-0x0000001870ec : "kernel"
[    1.242526] 0x0000001870ec-0x0000007e0000 : "rootfs"
[    1.254247] mtd: device 7 (rootfs) set to be root filesystem
[    1.265618] 1 squashfs-split partitions found on MTD device rootfs
[    1.277875] 0x0000005c0000-0x0000007e0000 : "rootfs_data"
[    1.307286] rt3050-esw 10110000.esw: link changed 0x00
[    1.319398] mtk_soc_eth 10100000.ethernet eth0: mediatek frame engine at 0xb0100000, irq 5
[    1.336305] mt7621_wdt 10000120.watchdog: Initialized
[    1.346918] NET: Registered protocol family 17
[    1.355854] bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this.
[    1.380852] 8021q: 802.1Q VLAN Support v1.8
[    1.400850] VFS: Mounted root (squashfs filesystem) readonly on device 31:7.
[    1.415731] Freeing unused kernel memory: 156K
[    2.907724] init: Console is alive
[    2.914778] init: - watchdog -
[    4.823033] kmodloader: loading kernel modules from /etc/modules-boot.d/*
[    4.836862] kmodloader: done loading kernel modules from /etc/modules-boot.d/*
[    4.861664] init: - preinit -
[    5.407419] random: procd: uninitialized urandom read (4 bytes read, 8 bits of entropy available)
[    5.727853] jffs2: notice: (281) jffs2_build_xattr_subsystem: complete building xattr subsystem, 0 of xdatum (0 unchecked, 0 orphan) and 0 of xref (0 dead, 0 orphan) found.
[    5.760297] mount_root: switching to jffs2 overlay
[    5.779839] urandom-seed: Seeding with /etc/urandom.seed
LEDE Starting
[    6.050272] procd: - early -
[    6.056841] procd: - watchdog -
[    6.698415] procd: - watchdog -
[    6.710076] procd: - ubus -
[    7.164225] random: ubusd: uninitialized urandom read (4 bytes read, 11 bits of entropy available)
[    7.321360] random: ubusd: uninitialized urandom read (4 bytes read, 11 bits of entropy available)
[    7.339503] random: ubusd: uninitialized urandom read (4 bytes read, 11 bits of entropy available)
[    7.357863] random: ubusd: uninitialized urandom read (4 bytes read, 11 bits of entropy available)
[    7.375755] random: ubusd: uninitialized urandom read (4 bytes read, 11 bits of entropy available)
[    7.394107] random: ubusd: uninitialized urandom read (4 bytes read, 11 bits of entropy available)
[    7.411964] random: ubusd: uninitialized urandom read (4 bytes read, 11 bits of entropy available)
[    7.429929] random: ubusd: uninitialized urandom read (4 bytes read, 11 bits of entropy available)
[    7.448541] random: ubusd: uninitialized urandom read (4 bytes read, 11 bits of entropy available)
[    7.466797] procd: - init -
[    7.952041] kmodloader: loading kernel modules from /etc/modules.d/*
[    8.050713] zram: Added device: zram0
[    8.076793] Netfilter messages via NETLINK v0.30.
[    8.095049] ip_set: protocol 6
[    8.907126] MT7628 module init
[    8.922596] MT7628 AP Driver version-4.0.1.3.P1
[    8.931643] load: mtk/WIFI_RAM_CODE_MT7628_e2.bin
[    9.082705] E2pAccessMode=2
[    9.987575] MT7612E module init
[   10.008239] MT76x2 AP Driver version-3.0.4.0.P1.20150909
[   10.737372] ip_tables: (C) 2000-2006 Netfilter Core Team
[   10.767007] nf_conntrack version 0.5.0 (953 buckets, 3812 max)
[   10.831321] ctnetlink v0.93: registering with nfnetlink.
[   10.863785] nf_conntrack_rtsp v0.7 loading
[   10.929506] nf_nat_rtsp v0.7 loading
[   10.990807] xt_time: kernel timezone is -0000
[   11.018111] PPP generic driver version 2.4.2
[   11.029604] NET: Registered protocol family 24
[   11.044456] kmodloader: done loading kernel modules from /etc/modules.d/*
[   16.661906] rt3050-esw 10110000.esw: link changed 0x00
[   18.744533] device eth0.1 entered promiscuous mode
[   18.754124] device eth0 entered promiscuous mode
[   18.796061] br-lan: port 1(eth0.1) entered forwarding state
[   18.807204] br-lan: port 1(eth0.1) entered forwarding state
[   20.802851] br-lan: port 1(eth0.1) entered forwarding state
[   21.854477] S95done (1247): drop_caches: 3
[   25.675974] device rai0 entered promiscuous mode
[   25.685256] br-lan: port 2(rai0) entered forwarding state
[   25.695986] br-lan: port 2(rai0) entered forwarding state
[   27.692870] br-lan: port 2(rai0) entered forwarding state
[   28.450488] device ra0 entered promiscuous mode
[   28.459607] br-lan: port 3(ra0) entered forwarding state
[   28.470161] br-lan: port 3(ra0) entered forwarding state
[   30.462806] br-lan: port 3(ra0) entered forwarding state
[   45.488308] random: nonblocking pool is initialized
我的恩山、我的无线 The best wifi forum is right here.
回复

使用道具 举报

您需要登录后才可以回帖 登录 | 立即注册

本版积分规则

有疑问请添加管理员QQ86788181|手机版|小黑屋|Archiver|恩山无线论坛(常州市恩山计算机开发有限公司版权所有) ( 苏ICP备05084872号 )

GMT+8, 2024-4-19 11:07

Powered by Discuz! X3.5

© 2001-2024 Discuz! Team.

| 江苏省互联网有害信息举报中心 举报信箱:js12377 | @jischina.com.cn 举报电话:025-88802724 本站不良内容举报信箱:68610888@qq.com 举报电话:0519-86695797

快速回复 返回顶部 返回列表