openwrt官网定制固件 uci-defaults 自定义

小小祥

首次启动时运行的脚本（uci-defaults）

# Beware! This script will be in /rom/etc/uci-defaults/ as part of the image.
# Uncomment lines to apply:
#
# wlan_name="OpenWrt"
# wlan_password="12345678"
#
# root_password="111111"
# lan_ip_address="192.168.1.1"
#
# pppoe_username="111111"
# pppoe_password="111111"

# log potential errors
exec >/tmp/setup.log 2>&1

if [ -n "$root_password" ]; then
  (echo "$root_password"; sleep 1; echo "$root_password") | passwd > /dev/null
fi

# Configure LAN
# More options: https://openwrt.org/docs/guide-user/base-system/basic-networking
if [ -n "$lan_ip_address" ]; then
  uci set network.lan.ipaddr="$lan_ip_address"
  uci commit network
fi

# Configure WLAN
# More options: https://openwrt.org/docs/guide-u ... ic#wi-fi_interfaces
if [ -n "$wlan_name" -a -n "$wlan_password" -a ${#wlan_password} -ge 8 ]; then
  uci set wireless.@wifi-device[0].disabled='0'
  uci set wireless.@wifi-iface[0].disabled='0'
  uci set wireless.@wifi-iface[0].encryption='psk2'
  uci set wireless.@wifi-iface[0].ssid="$wlan_name"
  uci set wireless.@wifi-iface[0].key="$wlan_password"
  uci commit wireless
fi

# Configure PPPoE
# More options: https://openwrt.org/docs/guide-u ... e_ppp_over_ethernet
if [ -n "$pppoe_username" -a "$pppoe_password" ]; then
  uci set network.wan.proto=pppoe
  uci set network.wan.username="$pppoe_username"
  uci set network.wan.password="$pppoe_password"
  uci commit network
fi

echo "All done!"



红色的地方修改了~定制报错.请教那些可以直定义，那些要删掉才能生效，请帮忙标注，感谢

aming.ou

不用变量，直接在命令中写死

1. # Configure root password
   
2. (echo "111111"; sleep 1; echo "111111") | passwd > /dev/null
   
3. uci set network.lan.ipaddr="192.168.1.1"
   
4. 
   
5. # Configure WLAN
   
6. uci set wireless.@wifi-device[0].disabled='0'
   
7. uci set wireless.@wifi-iface[0].disabled='0'
   
8. uci set wireless.@wifi-iface[0].encryption='psk2'
   
9. uci set wireless.@wifi-iface[0].ssid="OpenWrt"
   
10. uci set wireless.@wifi-iface[0].key="12345678"
    
11. 
    
12. # Configure PPPoE
    
13. uci set network.wan.proto=pppoe
    
14. uci set network.wan.username="111111"
    
15. uci set network.wan.password="111111"
    
16. 
    
17. #commit all uci
    
18. uci commit
    
19. 
    
20. echo "All done!"
    

复制代码

小小祥

aming.ou 发表于 2024-1-20 21:50
不用变量，直接在命令中写死

刚复制过去试了下还是报错

aming.ou

https://firmware-selector.openwrt.org/ 测试了几次，以前可以的，现在只要填了 首次启动时运行的脚本（uci-defaults） 的内容，就报错误 “Handling `defaults` not enabled on server” ，估计是构建服务器异常了。

01117E97

这种定制基于imagebuilder，线上的imagebuilder自定义默认设置比较麻烦且不全面，可以试试本地的imagebuilder，为所欲为。