|
本帖最后由 1471842398 于 2024-2-24 08:39 编辑
看不懂
Format: Log Type - Time(microsec) - Message - Optional Info
Log Type: B - Since Boot(Power On Reset), D - Delta, S - Statistic
S - QC_IMAGE_VERSION_STRING=BOOT.XF.0.3-00086-IPQ60xxLZB-1
S - IMAGE_VARIANT_STRING=IPQ6018LA
S - OEM_IMAGE_VERSION_STRING=crm-ubuntu200
S - Boot Interface: NAND
S - Secure Boot: Off
S - Boot Config @ 0x000a602c = 0x000002e5
S - JTAG ID @ 0x000a607c = 0x001390e1
S - OEM ID @ 0x000a6080 = 0x00000000
S - Serial Number @ 0x000a4128 = 0xc12b8751
S - OEM Config Row 0 @ 0x000a4188 = 0x0000000000000000
S - OEM Config Row 1 @ 0x000a4190 = 0x0000000000000000
S - Feature Config Row 0 @ 0x000a4130 = 0x0000800018200021
S - Feature Config Row 1 @ 0x000a4138 = 0x02c3e83783000009
S - PBL Patch Ver: 1
S - I-cache: On
S - D-cache: On
B - 3413 - PBL, Start
B - 592 - bootable_media_detect_entry, Start
B - 4339 - bootable_media_detect_success, Start
B - 5207 - elf_loader_entry, Start
B - 5380 - auth_hash_seg_entry, Start
B - 7847 - auth_hash_seg_exit, Start
B - 8344 - elf_segs_hash_verify_entry, Start
B - 103765 - elf_segs_hash_verify_exit, Start
B - 107958 - auth_xbl_sec_hash_seg_entry, Start
B - 108103 - auth_xbl_sec_hash_seg_exit, Start
B - 114648 - xbl_sec_segs_hash_verify_entry, Start
B - 114648 - xbl_sec_segs_hash_verify_exit, Start
B - 115578 - PBL, End
B - 97478 - SBL1, Start
B - 237259 - GCC [RstStat:0x0, RstDbg:0x600000] WDog Stat : 0x4
B - 239669 - clock_init, Start
D - 2745 - clock_init, Delta
B - 248178 - boot_flash_init, Start
D - 30439 - boot_flash_init, Delta
B - 281881 - sbl1_ddr_set_default_params, Start
D - 274 - sbl1_ddr_set_default_params, Delta
B - 288499 - boot_config_data_table_init, Start
D - 4788 - boot_config_data_table_init, Delta - (575 Bytes)
B - 298351 - CDT Version:2,Platform ID:8,Major ID:3,Minor ID:2,Subtype:0
B - 303170 - Image Load, Start
D - 6618 - OEM_MISC Image Loaded, Delta - (0 Bytes)
B - 312503 - Image Load, Start
D - 5063 - PMIC Image Loaded, Delta - (0 Bytes)
B - 320372 - sbl1_ddr_set_params, Start
B - 325374 - CPR configuration: 0x555
B - 328546 - Pre_DDR_clock_init, Start
D - 213 - Pre_DDR_clock_init, Delta
D - 0 - sbl1_ddr_set_params, Delta
B - 361333 - Image Load, Start
D - 427 - APDP Image Loaded, Delta - (0 Bytes)
B - 379359 - Image Load, Start
D - 427 - QTI_MISC Image Loaded, Delta - (0 Bytes)
B - 381768 - Image Load, Start
D - 824 - Auth Metadata
D - 732 - Segments hash check
D - 22662 - QSEE Dev Config Image Loaded, Delta - (36362 Bytes)
B - 406382 - Image Load, Start
D - 6801 - Auth Metadata
D - 10218 - Segments hash check
D - 331901 - QSEE Image Loaded, Delta - (1419184 Bytes)
B - 738740 - Image Load, Start
D - 671 - Auth Metadata
D - 1006 - Segments hash check
D - 34801 - RPM Image Loaded, Delta - (102800 Bytes)
B - 775218 - Image Load, Start
D - 701 - Auth Metadata
D - 3202 - Segments hash check
D - 124562 - APPSBL Image Loaded, Delta - (562716 Bytes)
B - 915427 - SBL1, End
D - 818223 - SBL1, Delta
S - Flash Throughput, 4000 KB/s (2122309 Bytes, 436599 us)
S - Core 0 Frequency, 800 MHz
S - DDR Frequency, 466 MHz
U-Boot 2016.01 (Dec 18 2021 - 11:29:01 +0800)
DRAM: smem ram ptable found: ver: 2 len: 4
256 MiB
NAND: ONFI device found
ID = 158061c8
Vendor = c8
Device = 61
SF: Unsupported flash IDs: manuf 00, jedec 0000, ext_jedec 0000
ipq_spi: SPI Flash not found (bus/cs/speed/mode) = (0/0/48000000/0)
128 MiB
MMC: <NULL>: 0
PCI0 is not defined in the device tree
In: serial@78B1000
Out: serial@78B1000
Err: serial@78B1000
machid: 8030200
eth5 MAC Address from ART is not valid
Net: MAC0 addr:80:12:df:5d:9:68
EDMA ver 1 hw init
Num rings - TxDesc:1 (0-0) TxCmpl:1 (0-0)
RxDesc:1 (15-15) RxFill:1 (7-7)
ipq6018_edma_alloc_rings: successfull
ipq6018_edma_setup_ring_resources: successfull
ipq6018_edma_configure_rings: successfull
ipq6018_edma_hw_init: successfull
eth0
Hit any key to stop autoboot: 0
ubi0: attaching mtd1
ubi0: scanning is finished
ubi0: attached mtd1 (name "mtd=0", size 96 MiB)
ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
ubi0: VID header offset: 2048 (aligned 2048), data offset: 4096
ubi0: good PEBs: 772, bad PEBs: 0, corrupted PEBs: 0
ubi0: user volume: 3, internal volumes: 1, max. volumes count: 128
ubi0: max/mean erase counter: 18/4, WL threshold: 4096, image sequence number: 393029433
ubi0: available PEBs: 0, total reserved PEBs: 772, PEBs reserved for bad PEB handling: 20
Read 0 bytes from volume kernel to 44000000
No size specified -> Using max size (4571136)
## Loading kernel from FIT Image at 44000000 ...
Using 'config@cp03-c1' configuration
Trying 'kernel@1' kernel subimage
Description: ARM64 OpenWrt Linux-4.4.60
Type: Kernel Image
Compression: gzip compressed
Data Start: 0x440000e8
Data Size: 4466723 Bytes = 4.3 MiB
Architecture: AArch64
OS: Linux
Load Address: 0x41080000
Entry Point: 0x41080000
Hash algo: crc32
Hash value: 8239b0e5
Hash algo: sha1
Hash value: 348660350f2f6578dcd7e248f54be89f234421f1
Verifying Hash Integrity ... crc32+ sha1+ OK
## Loading fdt from FIT Image at 44000000 ...
Using 'config@cp03-c1' configuration
Trying 'fdt@1' fdt subimage
Description: ARM64 OpenWrt cmiot_ax18 device tree blob
Type: Flat Device Tree
Compression: uncompressed
Data Start: 0x44442a48
Data Size: 65130 Bytes = 63.6 KiB
Architecture: AArch64
Hash algo: crc32
Hash value: 80e2d77c
Hash algo: sha1
Hash value: fa2278b45fa3e32f4eba0a2b487397ab92344466
Verifying Hash Integrity ... crc32+ sha1+ OK
Booting using the fdt blob at 0x44442a48
Uncompressing Kernel Image ... OK
Loading Device Tree to 484ed000, end 484ffe69 ... OK
Could not find PCI in device tree
Using machid 0x8030200 from environment
Starting kernel ...
Jumping to AARCH64 kernel via monitor
[ 0.000000] Booting Linux on physical CPU 0x0
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Linux version 4.4.60 (lean@lean-esxi) (gcc version 7.5.0 (OpenWrt GCC 7.5.0 r662-b686c6a07) ) #0 SMP PREEMPT Tue Aug 15 13:22:52 2023
[ 0.000000] Boot CPU: AArch64 Processor [51af8014]
[ 0.000000] Ignoring memory range 0x40000000 - 0x41000000
[ 0.000000] Machine: CMIOT-AX18 IPQ6018/AP-CP03-C1
[ 0.000000] efi: Getting EFI parameters from FDT:
[ 0.000000] efi: UEFI not found.
[ 0.000000] psci: probing for conduit method from DT.
[ 0.000000] psci: PSCIv1.0 detected in firmware.
[ 0.000000] psci: Using standard PSCI v0.2 function IDs
[ 0.000000] psci: MIGRATE_INFO_TYPE not supported.
[ 0.000000] PERCPU: Embedded 16 pages/cpu @ffffffc00ef65000 s25112 r8192 d32232 u65536
[ 0.000000] Detected VIPT I-cache on CPU0
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 44856
[ 0.000000] Kernel command line: console=ttyMSM0,115200n8 ubi.mtd=rootfs root=mtd:ubi_rootfs rootfstype=squashfs rootwait root=/dev/ubiblock0_1 swiotlb=1
[ 0.000000] PID hash table entries: 1024 (order: 1, 8192 bytes)
[ 0.000000] Dentry cache hash table entries: 32768 (order: 6, 262144 bytes)
[ 0.000000] Inode-cache hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.000000] software IO TLB [mem 0x4fec5000-0x4ff05000] (0MB) mapped at [ffffffc00eec5000-ffffffc00ef04fff]
[ 0.000000] Memory: 153864K/182272K available (6013K kernel code, 716K rwdata, 3152K rodata, 252K init, 417K bss, 28408K reserved, 0K cma-reserved)
[ 0.000000] Virtual kernel memory layout:
[ 0.000000] vmalloc : 0xffffff8000000000 - 0xffffffbdbfff0000 ( 246 GB)
[ 0.000000] vmemmap : 0xffffffbdc0000000 - 0xffffffbfc0000000 ( 8 GB maximum)
[ 0.000000] 0xffffffbdc0040000 - 0xffffffbdc0400000 ( 3 MB actual)
[ 0.000000] fixed : 0xffffffbffa7fd000 - 0xffffffbffac00000 ( 4108 KB)
[ 0.000000] PCI I/O : 0xffffffbffae00000 - 0xffffffbffbe00000 ( 16 MB)
[ 0.000000] modules : 0xffffffbffc000000 - 0xffffffc000000000 ( 64 MB)
[ 0.000000] memory : 0xffffffc000000000 - 0xffffffc00f000000 ( 240 MB)
[ 0.000000] .init : 0xffffffc000975000 - 0xffffffc0009b4000 ( 252 KB)
[ 0.000000] .text : 0xffffffc000080000 - 0xffffffc000974fe4 ( 9172 KB)
[ 0.000000] .data : 0xffffffc0009c5000 - 0xffffffc000a78200 ( 717 KB)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] CONFIG_RCU_FANOUT set to non-default value of 32
[ 0.000000] NR_IRQS:64 nr_irqs:64 0
[ 0.000000] Architected cp15 timer(s) running at 24.00MHz (virt).
[ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns
[ 0.000005] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns
[ 0.000400] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=240000)
[ 0.000412] pid_max: default: 32768 minimum: 301
[ 0.000503] Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
[ 0.000512] Mountpoint-cache hash table entries: 512 (order: 0, 4096 bytes)
[ 0.001024] Initializing cgroup subsys io
[ 0.001042] Initializing cgroup subsys memory
[ 0.001067] Initializing cgroup subsys devices
[ 0.001084] Initializing cgroup subsys freezer
[ 0.001095] Initializing cgroup subsys net_cls
[ 0.001106] Initializing cgroup subsys perf_event
[ 0.001117] Initializing cgroup subsys pids
[ 0.001354] EFI services will not be available.
[ 0.001374] ASID allocator initialised with 65536 entries
[ 0.052178] MSM Memory Dump base table set up
[ 0.052200] MSM Memory Dump apps data table set up
[ 0.090161] Detected VIPT I-cache on CPU1
[ 0.090201] CPU1: Booted secondary processor [51af8014]
[ 0.120148] Detected VIPT I-cache on CPU2
[ 0.120175] CPU2: Booted secondary processor [51af8014]
[ 0.150175] Detected VIPT I-cache on CPU3
[ 0.150200] CPU3: Booted secondary processor [51af8014]
[ 0.150253] Brought up 4 CPUs
[ 0.150279] SMP: Total of 4 processors activated.
[ 0.150290] CPU: All CPU(s) started at EL1
[ 0.163941] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[ 0.163970] futex hash table entries: 1024 (order: 5, 131072 bytes)
[ 0.164315] pinctrl core: initialized pinctrl subsystem
[ 0.165237] NET: Registered protocol family 16
[ 0.190083] cpuidle: using governor ladder
[ 0.220099] cpuidle: using governor menu
[ 0.220293] NET: Registered protocol family 42
[ 0.220464] vdso: 2 pages (1 code @ ffffffc0009cd000, 1 data @ ffffffc0009cc000)
[ 0.220496] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
[ 0.220658] DMA: preallocated 256 KiB pool for atomic allocations
[ 0.220773] Read of property:soc_version_minor from node failed
[ 0.220783] CPU: IPQ6000, SoC Version: 1.0
[ 0.221212] IPC logging disabled
[ 0.221219] IPC logging disabled
[ 0.221223] IPC logging disabled
[ 0.221228] IPC logging disabled
[ 0.221233] IPC logging disabled
[ 0.237289] irq: no irq domain found for /soc/smp2p-wcss/slave-kernel !
[ 0.238117] sps:sps is ready.
[ 0.241174] irq: no irq domain found for /soc/smp2p-wcss/slave-kernel !
[ 0.280959] socinfo_select_format: Unsupported format v0.13. Falling back to v0.12.
[ 0.280985] socinfo_print: v0.12, id=421, ver=1.0, raw_id=313, raw_ver=0, hw_plat=8, hw_plat_ver=196610
[ 0.280985] accessory_chip=0, hw_plat_subtype=0, pmic_model=0, pmic_die_revision=0 foundry_id=2 serial_number=3240855377 num_pmics=0 chip_family=0x66 raw_device_family=0x2 raw_device_number=0x17
[ 0.281874] SCSI subsystem initialized
[ 0.282087] usbcore: registered new interface driver usbfs
[ 0.282138] usbcore: registered new interface driver hub
[ 0.282216] usbcore: registered new device driver usb
[ 0.282284] pps_core: LinuxPPS API ver. 1 registered
[ 0.282291] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 0.282316] PTP clock support registered
[ 0.283658] Error: Driver 'qcom-smd' is already registered, aborting...
[ 0.283840] Advanced Linux Sound Architecture Driver Initialized.
[ 0.284504] clocksource: Switched to clocksource arch_sys_counter
[ 0.286732] NET: Registered protocol family 2
[ 0.287290] TCP established hash table entries: 2048 (order: 2, 16384 bytes)
[ 0.287324] TCP bind hash table entries: 2048 (order: 3, 32768 bytes)
[ 0.287367] TCP: Hash tables configured (established 2048 bind 2048)
[ 0.287413] UDP hash table entries: 256 (order: 1, 8192 bytes)
[ 0.287435] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
[ 0.287594] NET: Registered protocol family 1
[ 0.288276] hw perfevents: enabled with armv8_cortex_a53 PMU driver, 7 counters available
[ 0.295678] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 0.295695] jffs2: version 2.2 (NAND) (SUMMARY) (ZLIB) (LZO) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
[ 0.299201] Key type asymmetric registered
[ 0.299218] Asymmetric key parser 'x509' registered
[ 0.299359] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247)
[ 0.299372] io scheduler noop registered
[ 0.299383] io scheduler deadline registered (default)
[ 0.299490] io scheduler cfq registered
[ 0.306568] msm_rpm_log_probe: OK
[ 0.306845] msm-dcc b3000.dcc: DCC XPU is not specified
[ 0.307093] msm-dcc b3000.dcc: jiffies_64: 0xffff8aee, cntvct_64: 0x1040ad52
[ 0.307105] msm-dcc b3000.dcc: gcnt_hi: 0x00000000(0xffffff8000076004)
[ 0.307116] msm-dcc b3000.dcc: gcnt_lo: 0x1040afa7(0xffffff8000076000)
[ 0.307739] TZ SMMU State: SMMU Stage2 Enabled
[ 0.307789] TZ Log : Will warn on Access Violation, as paniconaccessviolation is not set
[ 0.308436] msm_serial 78b1000.serial: msm_serial: detected port #0
[ 0.308466] msm_serial 78b1000.serial: uartclk = 1843200
[ 0.308497] 78b1000.serial: ttyMSM0 at MMIO 0x78b1000 (irq = 5, base_baud = 115200) is a MSM
[ 0.308518] msm_serial: console setup on port #0
[ 1.044374] console [ttyMSM0] enabled
[ 1.049338] msm_serial: driver initialized
[ 1.052783] msm_serial_hsl_init: driver initialized
[ 1.065596] brd: module loaded
[ 1.069952] loop: module loaded
[ 1.070745] spi_qup 78b5000.spi: IN:block:16, fifo:64, OUT:block:16, fifo:64
[ 1.073261] m25p80 spi32766.0: unrecognized JEDEC id bytes: 00, 0, 0
[ 1.079897] QPIC controller hw version Major:1, Minor:5
[ 1.085855] nand: device found, Manufacturer ID: 0xc8, Chip ID: 0x61
[ 1.090647] nand: ONFI 10-Compliant GigaDevice PSR1GA30DT
[ 1.097257] nand: 128 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64
[ 1.102621] 19 ofpart partitions found on MTD device qcom_nand.0
[ 1.110021] Creating 19 MTD partitions on "qcom_nand.0":
[ 1.116180] 0x000000000000-0x000000180000 : "0:SBL1"
[ 1.122997] 0x000000180000-0x000000280000 : "0:MIBIB"
[ 1.127498] 0x000000280000-0x000000300000 : "0:BOOTCONFIG"
[ 1.131988] 0x000000300000-0x000000380000 : "0:BOOTCONFIG1"
[ 1.137377] 0x000000380000-0x000000700000 : "0SEE"
[ 1.145475] 0x000000700000-0x000000a80000 : "0SEE_1"
[ 1.150684] 0x000000a80000-0x000000b00000 : "0EVCFG"
[ 1.152988] 0x000000b00000-0x000000b80000 : "0EVCFG_1"
[ 1.158124] 0x000000b80000-0x000000c00000 : "0:RPM"
[ 1.163578] 0x000000c00000-0x000000c80000 : "0:RPM_1"
[ 1.168206] 0x000000c80000-0x000000d00000 : "0:CDT"
[ 1.173388] 0x000000d00000-0x000000d80000 : "0:CDT_1"
[ 1.178078] 0x000000d80000-0x000000e00000 : "0:APPSBLENV"
[ 1.183279] 0x000000e00000-0x000000f80000 : "0:APPSBL"
[ 1.189566] 0x000000f80000-0x000001100000 : "0:APPSBL_1"
[ 1.194598] 0x000001100000-0x000001180000 : "0:ART"
[ 1.199169] 0x000001180000-0x000007200000 : "rootfs"
[ 1.287783] mtd: device 16 (rootfs) set to be root filesystem
[ 1.288108] mtdsplit: no squashfs found in "rootfs"
[ 1.292509] 0x000007200000-0x000007280000 : "0:ETHPHYFW"
[ 1.297835] 0x000007280000-0x000007cc0000 : "0:CTCCFW"
[ 1.312971] libphy: Fixed MDIO Bus: probed
[ 1.754050] qca-mdio 90000.mdio: Could not find phy-reset-gpio
[ 1.754164] libphy: qca_mdio: probed
[ 1.758899] qca-mdio 90000.mdio: qca-mdio driver was registered
[ 1.762592] cnss: INFO: IPC Logging is disabled!
[ 1.768604] cnss[2]: INFO: Platform driver probed successfully. plat ffffffc008ca8018 tgt 0xfffd
[ 1.773328] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.781801] ehci-pci: EHCI PCI platform driver
[ 1.788163] ehci-platform: EHCI generic platform driver
[ 1.793063] usbcore: registered new interface driver uas
[ 1.797723] usbcore: registered new interface driver usb-storage
[ 1.803316] i2c /dev entries driver
[ 1.814116] device-mapper: ioctl: 4.34.0-ioctl (2015-10-28) initialised: dm-devel@redhat.com
[ 1.814552] cpufreq: cpufreq_online: CPU0: Running at unlisted freq: 799999 KHz
[ 1.821684] cpufreq: cpufreq_online: CPU0: Unlisted initial frequency changed to: 864000 KHz
[ 1.828791] sdhci: Secure Digital Host Controller Interface driver
[ 1.837329] sdhci: Copyright(c) Pierre Ossman
[ 1.843311] sdhci-pltfm: SDHCI platform and OF driver helper
[ 1.848241] qcom_ice_get_device_tree_data: No vdd-hba-supply regulator, assuming not needed
[ 1.853508] ICE IRQ = 15
[ 1.862578]
[ 1.862578] Version Rollback Feature Disabled
[ 1.865909] qcom-q6v5-wcss-pil cd00000.qcom_q6v5_wcss: “师夷长技以制夷” registeration success qcom_q6v5_wcss
[ 1.870005] remoteproc remoteproc0: cd00000.qcom_q6v5_wcss is available
[ 1.878930] of_graph_get_next_endpoint(): no port node found in /soc/csr@6001000
[ 1.885216] coresight-csr 6001000.csr: CSR initialized
[ 1.892864] of_graph_get_next_endpoint(): no port node found in /soc/cti@6010000
[ 1.897838] of_graph_get_next_endpoint(): no port node found in /soc/cti@6011000
[ 1.905387] of_graph_get_next_endpoint(): no port node found in /soc/cti@6012000
[ 1.912751] of_graph_get_next_endpoint(): no port node found in /soc/cti@6013000
[ 1.920137] of_graph_get_next_endpoint(): no port node found in /soc/cti@6014000
[ 1.927522] of_graph_get_next_endpoint(): no port node found in /soc/cti@6015000
[ 1.934894] of_graph_get_next_endpoint(): no port node found in /soc/cti@6016000
[ 1.942267] of_graph_get_next_endpoint(): no port node found in /soc/cti@6017000
[ 1.949655] of_graph_get_next_endpoint(): no port node found in /soc/cti@6018000
[ 1.957034] of_graph_get_next_endpoint(): no port node found in /soc/cti@6019000
[ 1.964401] of_graph_get_next_endpoint(): no port node found in /soc/cti@601a000
[ 1.971791] of_graph_get_next_endpoint(): no port node found in /soc/cti@601b000
[ 1.979172] of_graph_get_next_endpoint(): no port node found in /soc/cti@601c000
[ 1.986546] of_graph_get_next_endpoint(): no port node found in /soc/cti@601d000
[ 1.993916] of_graph_get_next_endpoint(): no port node found in /soc/cti@601e000
[ 2.001304] of_graph_get_next_endpoint(): no port node found in /soc/cti@601f000
[ 2.008688] of_graph_get_next_endpoint(): no port node found in /soc/cti@6198000
[ 2.016177] of_graph_get_next_endpoint(): no port node found in /soc/cti@6199000
[ 2.023494] of_graph_get_next_endpoint(): no port node found in /soc/cti@619a000
[ 2.030891] of_graph_get_next_endpoint(): no port node found in /soc/cti@619b000
[ 2.038293] of_graph_get_next_endpoint(): no port node found in /soc/cti@610c000
[ 2.045705] sps_register_bam_device : unable to create IPC Logging 0 for bam 0x0000000006064000
[ 2.052866] sps_register_bam_device : unable to create IPC Logging 1 for bam 0x0000000006064000sps_register_bam_device : unable to create IPC Logging 2 for bam 0x0000000006064000
[ 2.069970] sps_register_bam_device : unable to create IPC Logging 3 for bam 0x0000000006064000sps_register_bam_device : unable to create IPC Logging 4 for bam 0x0000000006064000
[ 2.085856] sps:BAM 0x0000000006064000 is registered.[ 2.093414] coresight-tmc 6048000.tmc: TMC initialized
[ 2.098148] coresight-tmc 6047000.tmc: TMC initialized
[ 2.103301] coresight-funnel 6041000.funnel: FUNNEL initialized
[ 2.108375] coresight-funnel 6100000.funnel: FUNNEL initialized
[ 2.114180] coresight-funnel 6130000.funnel: FUNNEL initialized
[ 2.120094] coresight-funnel 6120000.funnel: FUNNEL initialized
[ 2.126001] coresight-funnel 61a1000.funnel: FUNNEL initialized
[ 2.132226] coresight-etm4x 619c000.etm: ETM 4.0 initialized
[ 2.137982] coresight-etm4x 619d000.etm: ETM 4.0 initialized
[ 2.143892] coresight-etm4x 619e000.etm: ETM 4.0 initialized
[ 2.149562] coresight-etm4x 619f000.etm: ETM 4.0 initialized
[ 2.155011] coresight-replicator-qcom 6046000.replicator: REPLICATOR 1.0 initialized
[ 2.160703] coresight-stm 6002000.stm: STM initialized
[ 2.168890] of_graph_get_next_endpoint(): no port node found in /soc/hwevent@6101000
[ 2.173229] coresight-hwevent 6101000.hwevent: Hardware Event driver initialized
[ 2.181957] NET: Registered protocol family 10
[ 2.188921] NET: Registered protocol family 17
[ 2.192723] bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this.
[ 2.197229] Bridge firewalling registered
[ 2.209897] 8021q: 802.1Q VLAN Support v1.8
[ 2.213820] Mass Storage accelerater start.
[ 2.218756] ubi0: attaching mtd16
[ 2.548077] random: nonblocking pool is initialized
[ 2.714153] ubi0: scanning is finished
[ 2.720986] ubi0: attached mtd16 (name "rootfs", size 96 MiB)
[ 2.721006] ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
[ 2.725710] ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
[ 2.732471] ubi0: VID header offset: 2048 (aligned 2048), data offset: 4096
[ 2.739335] ubi0: good PEBs: 772, bad PEBs: 0, corrupted PEBs: 0
[ 2.746104] ubi0: user volume: 3, internal volumes: 1, max. volumes count: 128
[ 2.752350] ubi0: max/mean erase counter: 18/4, WL threshold: 4096, image sequence number: 393029433
[ 2.759392] ubi0: available PEBs: 0, total reserved PEBs: 772, PEBs reserved for bad PEB handling: 20
[ 2.768687] ubi0: background thread "ubi_bgt0d" started, PID 111
[ 2.769453] block ubiblock0_1: created from ubi0:1(rootfs)
[ 2.769469] hctosys: unable to open rtc device (rtc0)
[ 2.776220] ALSA device list:
[ 2.776222] No soundcards found.
[ 2.800219] VFS: Mounted root (squashfs filesystem) readonly on device 252:0.
[ 2.800676] Freeing unused kernel memory: 252K (ffffffc000975000 - ffffffc0009b4000)
[ 2.807808] Freeing alternatives memory: 48K (ffffffc0009b4000 - ffffffc0009c0000)
[ 3.142505] init: Console is alive
[ 3.142613] init: - watchdog -
[ 5.665507] kmodloader: loading kernel modules from /etc/modules-boot.d/*
[ 5.683463] Button Hotplug driver version 0.4.1
[ 5.844553] raid6: int64x1 gen() 507 MB/s
[ 6.014543] raid6: int64x1 xor() 442 MB/s
[ 6.184573] raid6: int64x2 gen() 811 MB/s
[ 6.354528] raid6: int64x2 xor() 658 MB/s
[ 6.524525] raid6: int64x4 gen() 1204 MB/s
[ 6.694501] raid6: int64x4 xor() 815 MB/s
[ 6.864555] raid6: int64x8 gen() 958 MB/s
[ 7.034509] raid6: int64x8 xor() 764 MB/s
[ 7.204571] raid6: neonx1 gen() 917 MB/s
[ 7.374501] raid6: neonx1 xor() 895 MB/s
[ 7.544521] raid6: neonx2 gen() 1391 MB/s
[ 7.714504] raid6: neonx2 xor() 1152 MB/s
[ 7.884498] raid6: neonx4 gen() 1874 MB/s
[ 8.054497] raid6: neonx4 xor() 1409 MB/s
[ 8.224514] raid6: neonx8 gen() 1942 MB/s
[ 8.394496] raid6: neonx8 xor() 1435 MB/s
[ 8.394511] raid6: using algorithm neonx8 gen() 1942 MB/s
[ 8.397817] raid6: .... xor() 1435 MB/s, rmw enabled
[ 8.403110] raid6: using intx1 recovery algorithm
[ 8.408473] xor: measuring software checksum speed
[ 8.504496] 8regs : 2732.400 MB/sec
[ 8.604508] 8regs_prefetch: 2450.000 MB/sec
[ 8.704495] 32regs : 3699.600 MB/sec
[ 8.804496] 32regs_prefetch: 3102.000 MB/sec
[ 8.804512] xor: using function: 32regs (3699.600 MB/sec)
[ 8.816580] Btrfs loaded
[ 8.822286] nf_conntrack version 0.5.0 (1204 buckets, 4816 max)
[ 8.823855] xt_FULLCONENAT: RFC3489 Full Cone NAT module
[ 8.823855] xt_FULLCONENAT: Copyright (C) 2018 Chion Tang <tech@chionlab.moe>
[ 8.833731] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 8.839926] ohci-platform: OHCI generic platform driver
[ 8.846601] uhci_hcd: USB Universal Host Controller Interface driver
[ 8.851188] ohci-pci: OHCI PCI platform driver
[ 8.862084] msm-usb-ssphy-qmp 78000.ssphy: Initializing QMP phy
[ 8.869780] msm-usb-ssphy-qmp 78000.ssphy: QMP PHY initialization timeout
[ 8.869803] msm-usb-ssphy-qmp 78000.ssphy: USB3_PHY_PCS_STATUS:68686868
[ 9.075786] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
[ 9.075891] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1
[ 9.081061] xhci-hcd xhci-hcd.0.auto: hcc params 0x0220fe65 hci version 0x110 quirks 0x00010010
[ 9.087748] xhci-hcd xhci-hcd.0.auto: irq 171, io mem 0x08a00000
[ 9.096718] hub 1-0:1.0: USB hub found
[ 9.102643] hub 1-0:1.0: 1 port detected
[ 9.106359] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
[ 9.110347] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2
[ 9.115611] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
[ 9.123379] hub 2-0:1.0: USB hub found
[ 9.131472] hub 2-0:1.0: 1 port detected
[ 9.139050] kmodloader: done loading kernel modules from /etc/modules-boot.d/*
[ 9.142732] init: - preinit -
Press the [f] key and hit [enter] to enter failsafe mode
Press the [1], [2], [3] or [4] key and hit [enter] to select the debug level
[ 12.511359] mount_root: loading kmods from internal overlay
[ 12.529414] kmodloader: loading kernel modules from //etc/modules-boot.d/*
[ 12.531199] kmodloader: done loading kernel modules from //etc/modules-boot.d/*
[ 13.264956] block: attempting to load /tmp/overlay/upper/etc/config/fstab
[ 13.265026] block: unable to load configuration (fstab: Entry not found)
[ 13.270738] block: attempting to load /tmp/overlay/etc/config/fstab
[ 13.277532] block: unable to load configuration (fstab: Entry not found)
[ 13.283497] block: attempting to load /etc/config/fstab
[ 13.291776] block: unable to load configuration (fstab: Entry not found)
[ 13.295395] block: no usable configuration
[ 13.304307] UBIFS (ubi0:2): background thread "ubifs_bgt0_2" started, PID 198
[ 13.338751] UBIFS (ubi0:2): recovery needed
[ 13.434107] UBIFS (ubi0:2): recovery completed
[ 13.434163] UBIFS (ubi0:2): UBIFS: mounted UBI device 0, volume 2, name "rootfs_data"
[ 13.437445] UBIFS (ubi0:2): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
[ 13.445346] UBIFS (ubi0:2): FS size: 45457408 bytes (43 MiB, 358 LEBs), journal size 2285568 bytes (2 MiB, 18 LEBs)
[ 13.455241] UBIFS (ubi0:2): reserved for root: 2147065 bytes (2096 KiB)
[ 13.465479] UBIFS (ubi0:2): media format: w4/r0 (latest is w4/r0), UUID 50E811E8-9505-40B2-8C4C-6ADAF8D8CD4C, small LPT model
[ 13.473263] block: attempting to load /tmp/ubifs_cfg/upper/etc/config/fstab
[ 13.483871] block: unable to load configuration (fstab: Entry not found)
[ 13.490332] block: attempting to load /tmp/ubifs_cfg/etc/config/fstab
[ 13.497279] block: unable to load configuration (fstab: Entry not found)
[ 13.503595] block: attempting to load /etc/config/fstab
[ 13.510384] block: unable to load configuration (fstab: Entry not found)
[ 13.515320] block: no usable configuration
[ 13.544538] UBIFS (ubi0:2): un-mount UBI device 0
[ 13.544561] UBIFS (ubi0:2): background thread "ubifs_bgt0_2" stops
[ 13.550798] UBIFS (ubi0:2): background thread "ubifs_bgt0_2" started, PID 199
[ 13.622584] UBIFS (ubi0:2): UBIFS: mounted UBI device 0, volume 2, name "rootfs_data"
[ 13.622610] UBIFS (ubi0:2): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
[ 13.629400] UBIFS (ubi0:2): FS size: 45457408 bytes (43 MiB, 358 LEBs), journal size 2285568 bytes (2 MiB, 18 LEBs)
[ 13.639293] UBIFS (ubi0:2): reserved for root: 2147065 bytes (2096 KiB)
[ 13.649531] UBIFS (ubi0:2): media format: w4/r0 (latest is w4/r0), UUID 50E811E8-9505-40B2-8C4C-6ADAF8D8CD4C, small LPT model
[ 13.658438] mount_root: loading kmods from internal overlay
[ 13.684986] kmodloader: loading kernel modules from /tmp/overlay/upper/etc/modules-boot.d/*
[ 13.685118] kmodloader: done loading kernel modules from /tmp/overlay/upper/etc/modules-boot.d/*
[ 14.324951] block: attempting to load /tmp/overlay/upper/etc/config/fstab
[ 14.325016] block: unable to load configuration (fstab: Entry not found)
[ 14.330732] block: attempting to load /tmp/overlay/etc/config/fstab
[ 14.337538] block: unable to load configuration (fstab: Entry not found)
[ 14.343492] block: attempting to load /etc/config/fstab
[ 14.350453] block: unable to load configuration (fstab: Entry not found)
[ 14.355388] block: no usable configuration
[ 14.363636] block: attempting to load /tmp/ubifs_cfg/upper/etc/config/fstab
[ 14.366256] block: unable to load configuration (fstab: Entry not found)
[ 14.373092] block: attempting to load /tmp/ubifs_cfg/etc/config/fstab
[ 14.380058] block: unable to load configuration (fstab: Entry not found)
[ 14.386383] block: attempting to load /etc/config/fstab
[ 14.393149] block: unable to load configuration (fstab: Entry not found)
[ 14.398106] block: no usable configuration
[ 14.435293] mount_root: overlay filesystem has not been fully initialized yet
[ 14.463379] mount_root: switching to ubifs overlay
65536+0 records in
65536+0 records out
ln: /lib/firmware/qcn9000/caldata_1.bin: No such file or directory
[ 14.676453] urandom-seed: Seed file not found (/etc/urandom.seed)
[ 14.717001] procd: - early -
[ 14.717044] procd: - watchdog -
Failed to connect to ubus
[ 15.309171] procd: - watchdog -
[ 15.309292] procd: - ubus -
[ 15.382189] procd: - init -
Please press Enter to activate this console.
[ 15.644387] kmodloader: loading kernel modules from /etc/modules.d/*
[ 15.655040] NET: Registered protocol family 38
[ 15.663374] FS-Cache: Loaded
[ 15.664760] NET: Registered protocol family 8
[ 15.665311] NET: Registered protocol family 20
[ 15.674472] cfg80211: World regulatory domain updated:
[ 15.674568] cfg80211: DFS Master region: unset
[ 15.679027] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[ 15.683639] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[ 15.693340] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz, 92000 KHz AUTO), (N/A, 2000 mBm), (N/A)
[ 15.696283] Key type dns_resolver registered
[ 15.706593] RPC: Registered named UNIX socket transport module.
[ 15.706596] RPC: Registered udp transport module.
[ 15.706597] RPC: Registered tcp transport module.
[ 15.706598] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 15.711291] NET: Registered protocol family 15
[ 15.712312] Initializing XFRM netlink socket
[ 15.731728] ssdk_switch_device_num_init[1210]:INFO:ess-switch dts node number: 1
[ 15.731768] ssdk_dt_get_switch_node[1015]:INFO:ess-switch DT exist!
[ 15.731776] ssdk_dt_parse_access_mode[901]:INFO:switch_access_mode: local bus
[ 15.731779] ssdk_dt_parse_access_mode[914]:INFO:switchreg_base_addr: 0x3a000000
[ 15.731781] ssdk_dt_parse_access_mode[915]:INFO:switchreg_size: 0x1000000
[ 15.731783] ssdk_dt_parse_mac_mode[304]:INFO:mac mode = 0x0
[ 15.731786] ssdk_dt_parse_mac_mode[313]:INFO:mac mode1 = 0xff
[ 15.731789] ssdk_dt_parse_mac_mode[322]:INFO:mac mode2 = 0xff
[ 15.731822] ssdk_dt_parse_uniphy[341]:INFO:ess-uniphy DT exist!
[ 15.731928] ssdk_dt_parse_intf_mac[846]:INFO:dp1 MAC 80:12:df:5d:09:68
[ 15.731952] ssdk_dt_parse_intf_mac[846]:INFO:dp2 MAC 80:12:df:5d:09:69
[ 15.731974] ssdk_dt_parse_intf_mac[846]:INFO:dp3 MAC 80:12:df:5d:09:6a
[ 15.731997] ssdk_dt_parse_intf_mac[846]:INFO:dp4 MAC 80:12:df:5d:09:6b
[ 15.732054] ssdk_plat_init start
[ 15.815389] ssdk_gcc_clock_init[1206]:INFO:SSDK gcc clock init successfully!
[ 15.815907] ssdk_phy_driver_init[339]:INFO:dev_id = 0, phy_adress = 0, phy_id = 0xffffffff phytype doesn't match
[ 15.815936] ssdk_phy_driver_init[339]:INFO:dev_id = 0, phy_adress = 1, phy_id = 0xffffffff phytype doesn't match
[ 15.815965] ssdk_phy_driver_init[339]:INFO:dev_id = 0, phy_adress = 2, phy_id = 0xffffffff phytype doesn't match
[ 15.815994] ssdk_phy_driver_init[339]:INFO:dev_id = 0, phy_adress = 3, phy_id = 0xffffffff phytype doesn't match
[ 15.816022] ssdk_phy_driver_init[339]:INFO:dev_id = 0, phy_adress = 4, phy_id = 0xffffffff phytype doesn't match
[ 15.816025] regi_init[3617]:INFO:Initializing HPPE!!
[ 15.890075] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
[ 15.895015] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A)
[ 15.902736] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
[ 15.912464] cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
[ 15.921923] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
[ 15.929994] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
[ 16.034502] ssdk_ppe_reset_init[1464]:INFO:ppe reset successfully!
[ 16.037300] qca_hppe_portctrl_hw_init[108]:INFO:Cypress PPE port initializing
[ 16.144867] __adpt_hppe_uniphy_psgmii_mode_set[1018]:INFO:uniphy 0 psgmii channel selection
[ 16.259576] ssdk_switch_register[1736]:INFO:Chip version 0x1501
[ 16.259615] qca_link_polling_select[1325]:INFO:link-polling-required node does not exist
[ 16.264291] ssdk_switch_register[1762]:INFO:polling is selected
[ 16.272629] regi_init[3621]:INFO:Initializing HPPE Done!!
[ 16.278306] regi_init[3681]:INFO:qca-ssdk module init succeeded!
[ 16.285374] SLIP: version 0.8.4-NET3.019-NEWTTY (dynamic channels, max=256) (6 bit encapsulation enabled).
[ 16.289901] CSLIP: code copyright 1989 Regents of the University of California.
[ 16.299368] SLIP linefill/keepalive option.
[ 16.311283] tun: Universal TUN/TAP device driver, 1.6
[ 16.311306] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 16.321010] EDMA ver 1 hw init
[ 16.322228] EDMA HW Reset completed succesfully
[ 16.325098] Num rings - TxDesc:1 (23-23) TxCmpl:1 (23-23)
[ 16.329477] RxDesc:1 (15-15) RxFill:1 (7-7)
[ 16.335584] libphy: PHY 90000.mdio:04 not found
[ 16.339040] nss-dp: probe of 3a001800.dp1 failed with error -14
[ 16.343618] libphy: PHY 90000.mdio:00 not found
[ 16.349551] nss-dp: probe of 3a001000.dp2 failed with error -14
[ 16.354031] libphy: PHY 90000.mdio:01 not found
[ 16.359881] nss-dp: probe of 3a001200.dp3 failed with error -14
[ 16.364446] libphy: PHY 90000.mdio:03 not found
[ 16.370287] nss-dp: probe of 3a001600.dp4 failed with error -14
[ 16.374900] **********************************************************
[ 16.380692] * NSS Data Plane driver
[ 16.387292] **********************************************************
[ 16.393133] ipip: IPv4 over IPv4 tunneling driver
[ 16.404624] l2tp_core: L2TP core driver, V2.0
[ 16.405559] l2tp_netlink: L2TP netlink interface
[ 16.541286] nss_driver - fw of size 857084 bytes copied to load addr: 40000000, nss_id : 0
[ 16.542826] Supported Frequencies -
[ 16.548471] 187.2 MHz 748.8 MHz
[ 16.554412] 1.6896 GHz [ 16.555370]
[ 16.557743] ffffffbffc76d100: set sdma ffffffc006366b00
[ 16.559285] node size 2 # items 4
[ 16.564142] memory: 40000000 268435456 (avl 200970240) items 4 active_cores 1
[ 16.567634] addr/size storage words 2 2 # words 4 in DTS, ddr size 1000000
[ 16.574744] ffffffbffc76d100: NSS core 0 DDR from 40000000 to 41000000
[ 16.581609] ffffffbffc76d100: meminfo init succeed
[ 16.596286] sctp: Hash tables configured (established 256 bind 256)
[ 16.597774] sit: IPv6 over IPv4 tunneling driver
[ 16.602740] IPv4 over IPsec tunneling driver
[ 16.609140] l2tp_eth: L2TP ethernet pseudowire support (L2TPv3)
[ 16.611619] l2tp_ip: L2TP IP encapsulation support (L2TPv3)
[ 16.617113] l2tp_ip6: L2TP IP encapsulation support for IPv6 (L2TPv3)
[ 16.620081] node size 2 # items 4
[ 16.620088] memory: 40000000 268435456 (avl 200970240) items 4 active_cores 1
[ 16.620094] addr/size storage words 2 2 # words 4 in DTS, ddr size 1000000
[ 16.620099] ffffffbffc76d100: nss core 0 booted successfully
[ 16.646801] nat46: module (version 8ff2ae59ec9840a7b8b45f976c51cae80abe0226) loaded.
[ 16.655138] gre: GRE over IPv4 demultiplexor driver
[ 16.660147] ip_gre: GRE over IPv4 tunneling driver
[ 16.665471] ip6_gre: GRE over IPv6 tunneling driver
[ 16.671280] Ethernet Channel Bonding Driver: v3.7.1 (April 27, 2011)
[ 16.695771] PPP generic driver version 2.4.2
[ 16.702258] NFS: Registering the id_resolver key type
[ 16.702315] Key type id_resolver registered
[ 16.706324] Key type id_legacy registered
[ 16.714219] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 16.868152] st: Version 20101219, fixed bufsize 32768, s/g segs 256
[ 16.869359] Netfilter messages via NETLINK v0.30.
[ 16.875007] ip_set: protocol 6
[ 16.888662] cryptodev: driver 1.12 loaded.
[ 16.908516] lp: driver loaded but no devices found
[ 16.925255] ppdev: user-space parallel port driver
[ 16.927857] QCA Hy-Fi multicast installation successfully
[ 16.934968] nss_lag_init[352]AG Manager Installed
[ 16.936809] NET: Registered protocol family 24
[ 16.941853] p p t p driver version 0.8.5
[ 16.946555] QCA multicast snooping installed successfully
[ 16.949264] <NSS-CRYPTO>:module loaded Build_ID - 10/03/23, 05:17:42 SoC=ipq60xx
[ 16.954837] nss-macsec0 DT exist!
[ 16.960286] cannot find nss-macsec1 node
[ 16.963415] cannot find nss-macsec2 node
[ 16.967504] nss_macsec init success
[ 16.987238] hidraw: raw HID events driver (C) Jiri Kosina
[ 16.989130] Mirror/redirect action on
[ 16.994171] u32 classifier
[ 16.995323] input device check on
[ 16.997872] Actions configured
[ 17.016701] fuse init (API version 7.23)
[ 17.020521] usbcore: registered new interface driver cdc_wdm
[ 17.031024] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 17.032860] usbcore: registered new interface driver ipheth
[ 17.039926] l2tp_ppp: PPPoL2TP kernel driver, V2.0
[ 17.077848] ctnetlink v0.93: registering with nfnetlink.
[ 17.253659] nf_tables: (c) 2007-2009 Patrick McHardy <kaber@trash.net>
[ 17.271184] ntfs3: Index binary search
[ 17.271204] ntfs3: Hot fix free clusters
[ 17.273813] ntfs3: Max link count 1024
[ 17.277919] ntfs3: Activated 32 bits per cluster
[ 17.284176] PPP MPPE Compression module registered
[ 17.289101] usbcore: registered new interface driver r8152
[ 17.295916] usbcore: registered new interface driver ums-alauda
[ 17.296711] usbcore: registered new interface driver ums-cypress
[ 17.302571] usbcore: registered new interface driver ums-datafab
[ 17.308854] usbcore: registered new interface driver ums-freecom
[ 17.314845] usbcore: registered new interface driver ums-isd200
[ 17.320799] usbcore: registered new interface driver ums-jumpshot
[ 17.326458] usbcore: registered new interface driver ums-karma
[ 17.332746] usbcore: registered new interface driver ums-sddr09
[ 17.338540] usbcore: registered new interface driver ums-sddr55
[ 17.344277] usbcore: registered new interface driver ums-usbat
[ 17.351415] usbcore: registered new interface driver usbhid
[ 17.355764] usbhid: USB HID core driver
[ 17.361915] usbcore: registered new interface driver usblp
[ 17.371429] wireguard: WireGuard 1.0.20210606 loaded. See www.wireguard.com for information.
[ 17.371458] wireguard: Copyright (C) 2015-2019 Jason A. Donenfeld <Jason@zx2c4.com>. All Rights Reserved.
[ 17.490206] xt_time: kernel timezone is -0000
[ 17.492529] usbcore: registered new interface driver ax88179_178a
[ 17.494926] usbcore: registered new interface driver cdc_ether
[ 17.513116] usbcore: registered new interface driver qmi_wwan
[ 17.514799] usbcore: registered new interface driver rndis_host
[ 17.520184] usbcore: registered new interface driver snd-usb-audio
[ 17.532060] kmodloader: done loading kernel modules from /etc/modules.d/*
qcawifi configuration is disable
[ 22.158662] wlan: [928:I:RPTR] qca_multi_link_init_module:
[ 22.158662] ******QCA Repeater Initialization Done***********
[ 22.158662]
***** starting cnssdaemon -i integrated *****
|
|