找回密码
 立即注册

QQ登录

只需一步,快速开始

搜索
广告投放联系QQ68610888
查看: 188|回复: 2

【求助】R2S刷内核5.10.208固件,lan口会自动掉。

[复制链接]
[   12.551104] br-lan: port 1(eth1) entered disabled state
[   14.970376] r8152 4-1:1.0 eth1: Promiscuous mode enabled
[   14.971188] r8152 4-1:1.0 eth1: carrier on
[   14.972192] br-lan: port 1(eth1) entered blocking state
[   14.972674] br-lan: port 1(eth1) entered forwarding state
[   14.973675] IPv6: ADDRCONF(NETDEV_CHANGE): br-lan: link becomes ready
[   15.751935] rk_gmac-dwmac ff540000.ethernet eth0: Link is Up - 1Gbps/Full - flow control off
[   15.752780] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[   21.172936] pppoe-wan: renamed from ppp0
[ 1965.005962] ------------[ cut here ]------------
[ 1965.006462] NETDEV WATCHDOG: eth1 (r8152): transmit queue 0 timed out
[ 1965.007177] WARNING: CPU: 2 PID: 0 at net/sched/sch_generic.c:467 dev_watchdog+0x2f8/0x300
[ 1965.007914] Modules linked in: pppoe ppp_async nft_fib_inet nf_flow_table_ipv6 nf_flow_table_ipv4 nf_flow_table_inet pppox ppp_generic nft_reject_ipv6 nft_reject_ipv4 nft_reject_inet nft_reject nft_redir nft_quota nft_objref nft_numgen nft_nat nft_masq nft_log nft_limit nft_hash nft_flow_offload nft_fib_ipv6 nft_fib_ipv4 nft_fib nft_ct nft_counter nft_chain_nat nf_tables nf_nat nf_flow_table nf_conntrack cdc_ncm cdc_ether usbnet slhc r8152 nfnetlink nf_reject_ipv6 nf_reject_ipv4 nf_log_ipv6 nf_log_ipv4 nf_log_common nf_defrag_ipv6 nf_defrag_ipv4 crc_ccitt sha256_generic libsha256 gpio_button_hotplug
[ 1965.012869] CPU: 2 PID: 0 Comm: swapper/2 Not tainted 5.10.208 #0
[ 1965.013415] Hardware name: FriendlyElec NanoPi R2S (DT)
[ 1965.013892] pstate: 20000005 (nzCv daif -PAN -UAO -TCO BTYPE=--)
[ 1965.014435] pc : dev_watchdog+0x2f8/0x300
[ 1965.014803] lr : dev_watchdog+0x2f8/0x300
[ 1965.015165] sp : ffff800010f1bd70
[ 1965.015469] x29: ffff800010f1bd70 x28: ffff800010ae35a8
[ 1965.015959] x27: 00000000ffffffff x26: 0000000000000002
[ 1965.016449] x25: ffff0000015a6478 x24: 0000000000000140
[ 1965.016938] x23: ffff0000015a63dc x22: ffff000004101280
[ 1965.017427] x21: ffff800010bf6000 x20: ffff0000015a6000
[ 1965.017915] x19: 0000000000000000 x18: 0000000000000030
[ 1965.018402] x17: 00002a75a53b5a64 x16: 00002a75a53b5a64
[ 1965.018891] x15: ffff800090f1ba47 x14: 0000000000000006
[ 1965.019380] x13: ffff800010c0ce60 x12: 0000000000000351
[ 1965.019869] x11: 000000000000011b x10: ffff800010c0ce60
[ 1965.020358] x9 : ffff800010d6ce60 x8 : 00000000ffffc000
[ 1965.020845] x7 : ffff800010c0ce60 x6 : 0000000000000003
[ 1965.021331] x5 : 0000000000000000 x4 : 0000000000000000
[ 1965.021818] x3 : ffff800010bfb978 x2 : 0000000000000004
[ 1965.022306] x1 : ffff0000004e3000 x0 : 0000000000000039
[ 1965.022794] Call trace:
[ 1965.023036]  dev_watchdog+0x2f8/0x300
[ 1965.023377]  call_timer_fn.constprop.0+0x24/0x80
[ 1965.023797]  __run_timers.part.0+0x1d4/0x20c
[ 1965.024186]  run_timer_softirq+0x3c/0x74
[ 1965.024548]  __do_softirq+0x124/0x290
[ 1965.024889]  irq_exit+0xdc/0xfc
[ 1965.025183]  __handle_domain_irq+0x80/0xe0
[ 1965.025556]  gic_handle_irq+0x58/0xe0
[ 1965.025893]  el1_irq+0xc8/0x180
[ 1965.026191]  cpuidle_enter_state+0x130/0x31c
[ 1965.026582]  cpuidle_enter+0x38/0x50
[ 1965.026914]  do_idle+0x1d8/0x230
[ 1965.027214]  cpu_startup_entry+0x28/0x60
[ 1965.027578]  secondary_start_kernel+0x128/0x150
[ 1965.027987] ---[ end trace d4358290baa70ffd ]---
[ 1965.028495] r8152 4-1:1.0 eth1: Tx timeout
[ 1965.031813] r8152 4-1:1.0 eth1: Tx status -2
[ 1965.032280] r8152 4-1:1.0 eth1: Tx status -2
[ 1965.032747] r8152 4-1:1.0 eth1: Tx status -2
[ 1965.033219] r8152 4-1:1.0 eth1: Tx status -2
[ 1967.190805] usb 4-1: reset SuperSpeed Gen 1 USB device number 2 using xhci-hcd
[ 1967.223126] r8152 4-1:1.0 eth1: Invalid ether addr 00:00:00:00:00:00
[ 1967.223728] r8152 4-1:1.0 eth1: Random ether addr c2:fb:2e:1d:17:9c
[ 1967.229219] r8152 4-1:1.0 eth1: Promiscuous mode enabled
[ 4749.929200] r8152 4-1:1.0 eth1: Tx timeout
[ 4754.969172] r8152 4-1:1.0 eth1: Tx timeout
[ 4759.929181] r8152 4-1:1.0 eth1: Tx timeout
[ 4761.942027] r8152 4-1:1.0 eth1: Tx status -2
[ 4761.942528] r8152 4-1:1.0 eth1: Tx status -2
[ 4761.942992] r8152 4-1:1.0 eth1: Tx status -2
[ 4761.943460] r8152 4-1:1.0 eth1: Tx status -2


以上是内核日志的内容,有懂的大佬帮忙看看是啥问题?我去github上提个单子问问?

我的恩山、我的无线 The best wifi forum is right here.
 楼主| | 显示全部楼层
有懂的大佬帮忙看看么
我的恩山、我的无线 The best wifi forum is right here.
回复

使用道具 举报

我也发现了,刷很多固件lan口灯都不亮,只有刷iStoreOS的才可以。
我的恩山、我的无线 The best wifi forum is right here.
回复

使用道具 举报

您需要登录后才可以回帖 登录 | 立即注册

本版积分规则

关闭

欢迎大家光临恩山无线论坛上一条 /1 下一条

有疑问请添加管理员QQ86788181|手机版|小黑屋|Archiver|恩山无线论坛(常州市恩山计算机开发有限公司版权所有) ( 苏ICP备05084872号 )

GMT+8, 2024-4-29 05:04

Powered by Discuz! X3.5

© 2001-2024 Discuz! Team.

| 江苏省互联网有害信息举报中心 举报信箱:js12377 | @jischina.com.cn 举报电话:025-88802724 本站不良内容举报信箱:68610888@qq.com 举报电话:0519-86695797

快速回复 返回顶部 返回列表