【已解决】自编译固件有问

Roxe

如图，git云编译，报错

固件是fork这位的：https://github.com/vb1980/Padavan-KVR/tree/main

下面是配置：

1. #修改TNAME: K2P 中的K2P为你需要编译的型号，注意名称要与configs/templates/目录下的名字相同
   
2. name: Build-Padavan-K2P-5.0
   
3. 
   
4. on:
   
5.   workflow_dispatch:
   
6. 
   
7. 
   
8. jobs:
   
9.   build:
   
10.     runs-on: ubuntu-20.04
    
11.     if: github.event.repository.owner.id == github.event.sender.id
    
12. 
    
13.     steps:
    
14.     - name: Checkout
    
15.       uses: actions/checkout@master
    
16.     - name: Initialization environment
    
17.       env:
    
18.         DEBIAN_FRONTEND: noninteractive
    
19.       run: |
    
20.         sudo apt-get update
    
21.         sudo apt-get -y install unzip libtool-bin curl cmake gperf gawk flex bison nano xxd fakeroot \
    
22.         cpio git python-docutils gettext automake autopoint texinfo build-essential help2man \
    
23.         pkg-config zlib1g-dev libgmp3-dev libmpc-dev libmpfr-dev libncurses5-dev libltdl-dev wget
    
24.     - name: Clone source code
    
25.       env:
    
26.         KERNEL: 3.4
    
27.       run: |
    
28.         git clone --depth=1 https://github.com/fightroad/Padavan-KVR.git /opt/rt-n56u
    
29.         cd /opt/rt-n56u/toolchain-mipsel
    
30.         sh dl_toolchain.sh
    
31.         mkdir -p /opt/images/
    
32.     - name: Build Firmware
    
33.       env:
    
34.         TNAME: K2P
    
35.         KERNEL: 3.4
    
36.       run: |
    
37.         cd /opt/rt-n56u/trunk
    
38.         if [ ! -f configs/templates/$TNAME.config ] ; then
    
39.         echo "configs/templates/$TNAME.config not found "
    
40.         exit 1
    
41.         fi
    
42.         cp -f configs/templates/$TNAME.config .config
    
43.         ################################################################################################
    
44.         #因不同型号配置功能不一样，所以先把配置项删除，如果你自己要添加其他的，也要写上删除这一条，切记！！！
    
45.         ################################################################################################
    
46.         
    
47.         sed -i 'CONFIG_FIRMWARE_INCLUDE_SFE=y/CONFIG_FIRMWARE_INCLUDE_SFE=n/g' .config
    
48.         sed -i 'CONFIG_FIRMWARE_INCLUDE_SMBD36=y/CONFIG_FIRMWARE_INCLUDE_SMBD36=n/g' .config
    
49.         sed -i 'CONFIG_FIRMWARE_INCLUDE_OPENVPN=y/CONFIG_FIRMWARE_INCLUDE_OPENVPN=n/g' .config
    
50.         sed -i 'CONFIG_FIRMWARE_INCLUDE_FFMPEG_NEW=y/CONFIG_FIRMWARE_INCLUDE_FFMPEG_NEW=n/g' .config
    
51.         sed -i 'CONFIG_FIRMWARE_INCLUDE_DOGCOM=y/CONFIG_FIRMWARE_INCLUDE_DOGCOM=n/g' .config
    
52.         sed -i 'CONFIG_FIRMWARE_INCLUDE_MINIEAP=y/CONFIG_FIRMWARE_INCLUDE_MINIEAP=n/g' .config
    
53.         sed -i 'CONFIG_FIRMWARE_INCLUDE_NJIT_CLIENT=y/CONFIG_FIRMWARE_INCLUDE_NJIT_CLIENT=n/g' .config
    
54.         sed -i 'CONFIG_FIRMWARE_INCLUDE_NAPT66=y/CONFIG_FIRMWARE_INCLUDE_NAPT66=n/g' .config
    
55.         sed -i 'CONFIG_FIRMWARE_INCLUDE_VLMCSD=y/CONFIG_FIRMWARE_INCLUDE_VLMCSD=n/g' .config
    
56.         sed -i 'CONFIG_FIRMWARE_INCLUDE_LRZSZ=y/CONFIG_FIRMWARE_INCLUDE_LRZSZ=n/g' .config
    
57.         sed -i 'CONFIG_FIRMWARE_INCLUDE_MTR=y/CONFIG_FIRMWARE_INCLUDE_MTR=n/g' .config
    
58.         sed -i 'CONFIG_FIRMWARE_INCLUDE_SOCAT=y/CONFIG_FIRMWARE_INCLUDE_SOCAT=n/g' .config
    
59.         sed -i 'CONFIG_FIRMWARE_INCLUDE_SRELAY=y/CONFIG_FIRMWARE_INCLUDE_SRELAY=n/g' .config
    
60.         ######################################################################
    
61.         #以下选项是定义你需要的功能（y=集成,n=忽略），重新写入到.config文件
    
62.         ######################################################################
    
63.         ##内网穿透
    
64.         #echo "CONFIG_FIRMWARE_INCLUDE_NPC=n" >> .config
    
65.         # echo "CONFIG_FIRMWARE_INCLUDE_ZEROTIER=n" >> .config #zerotier ~1.3M
    
66.         # echo "CONFIG_FIRMWARE_INCLUDE_FRPC=n" >> .config  #frpc
    
67.         # echo "CONFIG_FIRMWARE_INCLUDE_ALIDDNS=n" >> .config #aliddns
    
68.         ##海淘购物##
    
69.         # echo "CONFIG_FIRMWARE_INCLUDE_SHADOWSOCKS=n" >> .config
    
70.         #echo "CONFIG_FIRMWARE_INCLUDE_V2RAY=n" >> .config
    
71.         #echo "CONFIG_FIRMWARE_INCLUDE_XRAY=n" >> .config
    
72.         #echo "CONFIG_FIRMWARE_INCLUDE_TROJAN=n" >> .config
    
73.         #echo "CONFIG_FIRMWARE_INCLUDE_SSOBFS=n" >> .config
    
74.         ##vpn
    
75.         # echo  "CONFIG_FIRMWARE_INCLUDE_OPENVPN=n" >> .config
    
76.         #echo "CONFIG_FIRMWARE_INCLUDE_SOFTETHERVPN_SERVER=n" >> .config
    
77.         #echo "CONFIG_FIRMWARE_INCLUDE_SOFTETHERVPN_CLIENT=n" >> .config
    
78.         #echo "CONFIG_FIRMWARE_INCLUDE_SOFTETHERVPN_CMD=n" >> .config
    
79.         
    
80.         ###############################################################################
    
81.         ##########
    
82.         #自定义添加其它功能请参考源码configs/templates/目录下的config文件。按照上面的格式添加即可
    
83.         #格式如下：
    
84.         #sed -i '/自定义项/d' .config
    
85.         #echo "自定义项=y" >> .config
    
86.         #########################################################################################
    
87.         sudo ./clear_tree
    
88.         sudo ./build_firmware_modify $TNAME 0
    
89.         sudo mv -f images/*.trx /opt/images/
    
90.     - name : Upload packages
    
91.       uses: actions/upload-artifact@master
    
92.       if: always()
    
93.       with:
    
94.         name: Padavan-packages
    
95.         path: /opt/images

复制代码

新手，哪位帮忙指点一下，感谢！！！


后续：

经过自己检查，sed命令少了“s/”