发一个RouterOS的DDNS脚本,支持dynv6和dynu

厉月

简单的dynv6和dynu双域名更新，有哪位大神能加上接口状态检测，接口未就绪循环重试，同一时间值允许一个脚本运行

1. # ========================
   
2. # 基础参数配置区
   
3. # ========================
   
4. 
   
5. # ------------------------
   
6. # Dynv6 专用配置
   
7. # ------------------------
   
8. :local dynv6Hostname "你的dynv6域名"
   
9. :local dynv6Token "你的dynv6令牌"
   
10. :local dynv6ApiUrl "https://dynv6.com/api/update"
    
11. 
    
12. # ------------------------
    
13. # Dynu 专用配置
    
14. # ------------------------
    
15. :local dynuHostname "你的dynu域名"
    
16. :local dynuPassword "你的dynu密钥"
    
17. :local dynuApiUrl "https://api.dynu.com/nic/update"
    
18. 
    
19. # ========================
    
20. # 公共变量区（IP获取）
    
21. # ========================
    
22. :local ifaceName "你的pppoe接口"
    
23. :local currentIP [/ip address get [/ip address find dynamic=yes interface=$ifaceName] address]
    
24. :set currentIP [:pick $currentIP 0 [:find $currentIP "/"]]
    
25. 
    
26. # ========================
    
27. # DDNS更新执行区
    
28. # ========================
    
29. 
    
30. # ------------------------
    
31. # Dynv6 更新流程
    
32. # ------------------------
    
33. #:log info "开始Dynv6更新流程..."
    
34. :local dynv6RequestUrl ($dynv6ApiUrl . "?hostname=" . $dynv6Hostname . "&token=" . $dynv6Token . "&ipv4=" . $currentIP)
    
35. :local dynv6Response [/tool/fetch url=$dynv6RequestUrl mode=https as-value output=user]
    
36. 
    
37. :if ([:len $dynv6Response] > 0) do={
    
38.     :if ($dynv6Response->"status" = "finished") do={
    
39.         :local dynv6StatusCode ($dynv6Response->"data")
    
40. 
    
41.         :if ($dynv6StatusCode = "addresses updated") do={
    
42.             :log info "Dynv6域名：$dynv6Hostname 更新成功 IP： $currentIP"
    
43.         } else={
    
44.             :if ($dynv6StatusCode = "addresses unchanged") do={
    
45.                 :log info "Dynv6地址未变更：$currentIP  域名：$dynv6Hostname IP"
    
46.             } else={
    
47.                 :log warning "Dynv6异常响应：$dynv6StatusCode"
    
48.             }
    
49.         }
    
50.     } else={
    
51.         :log error "Dynv6请求失败：$($dynv6Response->"error")"
    
52.     }
    
53. } else={
    
54.     :log error "Dynv6服务无响应"
    
55. }
    
56. 
    
57. # ------------------------
    
58. # Dynu 更新流程
    
59. # ------------------------
    
60. #:log info "开始Dynu更新流程..."
    
61. :local dynuRequestUrl ($dynuApiUrl . "?hostname=" . $dynuHostname . "&myip=" . $currentIP . "&password=" . $dynuPassword)
    
62. :local dynuResponse [/tool/fetch url=$dynuRequestUrl mode=https as-value output=user]
    
63. 
    
64. 
    
65. :if ([:len $dynuResponse] > 0) do={
    
66.     :if ($dynuResponse->"status" = "finished") do={
    
67.         :local dynuStatusCode ($dynuResponse->"data")
    
68. 
    
69.         :if ($dynuStatusCode = "good $currentIP") do={
    
70.             :log info "Dynu域名：“$dynuHostname 更新成功 IP： $currentIP"
    
71.         } else={
    
72.             :if ($dynuStatusCode = "nochg") do={
    
73.                 :log info "Dynu地址未变更：$currentIP 域名：$dynuHostname IP"
    
74.             } else={
    
75.                 :log warning "Dynu异常响应：$dynuStatusCode"
    
76.             }
    
77.         }
    
78.     } else={
    
79.         :log error "Dynu请求失败：$($dynuResponse->"error")"
    
80.     }
    
81. } else={
    
82.     :log error "Dynu服务无响应"
    
83. }
    
84. 
    
85. # ========================
    
86. # 执行结束
    
87. # ========================

复制代码

tty228

刚好写了个 ROS cloudflare ddns 脚本，借楼顺便发一个

https://github.com/tty228/mikrotik-cloudflare-dns

代码不贴了，每次编辑还要审核

cw4774

支持IPV6吗

merit

试了一下，出错了

厉月

merit 发表于 2025-5-11 20:11
试了一下，出错了

是dynu报错吗？dns静态记录加上，api.dynu.com，162.216.242.58

yudechao111

7.4版本以后支持docker  直接上ddns-go