|
|
Format: Log Type - Time(microsec) - Message - Optional Info
Log Type: B - Since Boot(Power On Reset), D - Delta, S - Statistic
S - QC_IMAGE_VERSION_STRING=BOOT.BF.3.3.1.1-00064
S - IMAGE_VARIANT_STRING=MAACANAZA
S - OEM_IMAGE_VERSION_STRING=node-sh-08
S - Boot Config, 0x000002c5
B - 127 - PBL, Start
B - 1563 - bootable_media_detect_entry, Start
B - 3538 - bootable_media_detect_success, Start
B - 3541 - elf_loader_entry, Start
B - 8428 - auth_hash_seg_entry, Start
B - 8788 - auth_hash_seg_exit, Start
B - 100547 - elf_segs_hash_verify_entry, Start
B - 171740 - PBL, End
B - 141306 - SBL1, Start
B - 202154 - GCC [RstStat:0x0, RstDbg:0x600000] WDog Stat : 0x4
B - 210480 - clock_init, Start
D - 7198 - clock_init, Delta
B - 217861 - boot_flash_init, Start
B - 217983 - lsy--->Nov 23 2021, 11:03:10
B - 226828 - lsy--->Nov 23 2021, 11:03:10
D - 25437 - boot_flash_init, Delta
B - 243359 - boot_config_data_table_init, Start
D - 4544 - boot_config_data_table_init, Delta - (575 Bytes)
B - 250984 - Boot Setting : 0x00020618
B - 257511 - CDT version:2,Platform ID:8,Major ID:4,Minor ID:0,Subtype:2
B - 264435 - sbl1_ddr_set_params, Start
B - 266051 - Pre_DDR_clock_init, Start
B - 271694 - Pre_DDR_clock_init, End
B - 913566 - do ddr sanity test, Start
D - 61 - do ddr sanity test, Delta
B - 918233 - Image Load, Start
D - 240889 - QSEE Image Loaded, Delta - (578956 Bytes)
B - 1159976 - Image Load, Start
D - 13695 - DEVCFG Image Loaded, Delta - (13592 Bytes)
B - 1173670 - Image Load, Start
D - 178181 - APPSBL Image Loaded, Delta - (428809 Bytes)
B - 1351943 - QSEE Execution, Start
D - 30 - QSEE Execution, Delta
B - 1358378 - SBL1, End
D - 1219756 - SBL1, Delta
S - Flash Throughput, 2472 KB/s (1022604 Bytes, 413603 us)
S - DDR Frequency, 800 MHz
S - Core 0 Frequency, 800 MHz
U-Boot 2016.01 (Jul 15 2021 - 11:41:08 +0000), Build: jenkins-common_router_openwrt_ota_publish-1523
DRAM: smem ram ptable found: ver: 1 len: 4
256 MiB
NAND: QPIC controller support serial NAND
ID = 21baef
Vendor = ef
Device = ba
qpic_nand_read_id_serial : No serial Nand device found in table.
SF: Unsupported flash IDs: manuf 00, jedec 0000, ext_jedec 0000
ipq_spi: SPI Flash not found (bus/cs/speed/mode) = (0/0/48000000/0)
0 MiB
MMC: sdhci: Node Not found, skipping initialization
*** Warning - readenv() failed, using default environment
PCI Link Intialized
In: serial@78AF000
Out: serial@78AF000
Err: serial@78AF000
machid: 8040002
ART partition read failed..
### main_loop: bootcmd="bootmiwifi"
Hit any key to stop autoboot: 0
miwifi: check crash in rmem !
detect button press, continue check 5 secs
detect button pressed 5 secs !
confirm to launch xq_upgrade !
cmd=dhcp
Net: cmbblk is stable 5
ART partition read failed..
MAC0 addr:0:11:22:33:44:55
PHY ID1: 0x4d
PHY ID2: 0xd0c0
MAC1 addr:0:11:22:33:44:56
GMAC1:Invalid PHY ID
eth0, eth1
Trying to ping server.....
eth0 Down Speed :10 Half duplex
Link status/Get speed/Get duplex not mapped
ping failed; host 192.168.31.100 is not alive
eth0 Down Speed :10 Half duplex
Link status/Get speed/Get duplex not mapped
ping failed; host 192.168.31.100 is not alive
eth0 Down Speed :10 Half duplex
Link status/Get speed/Get duplex not mapped
ping failed; host 192.168.31.100 is not alive
eth0 Down Speed :10 Half duplex
Link status/Get speed/Get duplex not mapped
ping failed; host 192.168.31.100 is not alive
Ping test fail
eth0 Down Speed :1000 Full duplex
Link status/Get speed/Get duplex not mapped
======== dhcp failed, retry !========
confirm to launch xq_upgrade !
cmd=dhcp
Net: cmbblk is stable 5
ART partition read failed..
MAC0 addr:0:11:22:33:44:55
PHY ID1: 0x4d
PHY ID2: 0xd0c0
MAC1 addr:0:11:22:33:44:56
GMAC1:Invalid PHY ID
, eth0, eth1
Trying to ping server.....
eth0 Down Speed :10 Half duplex
Link status/Get speed/Get duplex not mapped
ping failed; host 192.168.31.100 is not alive
eth0 Down Speed :10 Half duplex
Link status/Get speed/Get duplex not mapped
ping failed; host 192.168.31.100 is not alive
eth0 Down Speed :10 Half duplex
Link status/Get speed/Get duplex not mapped
ping failed; host 192.168.31.100 is not alive
eth0 Down Speed :10 Half duplex
Link status/Get speed/Get duplex not mapped
ping failed; host 192.168.31.100 is not alive
Ping test fail
eth0 Down Speed :1000 Full duplex
Link status/Get speed/Get duplex not mapped
======== dhcp failed, retry !========
confirm to launch xq_upgrade !
cmd=dhcp
Net: cmbblk is stable 5
ART partition read failed..
MAC0 addr:0:11:22:33:44:55
PHY ID1: 0x4d
PHY ID2: 0xd0c0
MAC1 addr:0:11:22:33:44:56
GMAC1:Invalid PHY ID
, eth0, eth1
Trying to ping server.....
eth0 Down Speed :10 Half duplex
Link status/Get speed/Get duplex not mapped
ping failed; host 192.168.31.100 is not alive
eth0 Down Speed :10 Half duplex
Link status/Get speed/Get duplex not mapped
ping failed; host 192.168.31.100 is not alive
eth0 Down Speed :10 Half duplex
Link status/Get speed/Get duplex not mapped
ping failed; host 192.168.31.100 is not alive
eth0 Down Speed :10 Half duplex
Link status/Get speed/Get duplex not mapped
ping failed; host 192.168.31.100 is not alive
Ping test fail
eth0 Down Speed :1000 Full duplex
Link status/Get speed/Get duplex not mapped
======== dhcp failed, retry !========
confirm to launch xq_upgrade !
cmd=dhcp
Net: cmbblk is stable 5
ART partition read failed..
MAC0 addr:0:11:22:33:44:55
PHY ID1: 0x4d
PHY ID2: 0xd0c0
MAC1 addr:0:11:22:33:44:56
GMAC1:Invalid PHY ID
, eth0, eth1
Trying to ping server.....
eth0 Down Speed :10 Half duplex
Link status/Get speed/Get duplex not mapped
ping failed; host 192.168.31.100 is not alive
eth0 Down Speed :10 Half duplex
Link status/Get speed/Get duplex not mapped
ping failed; host 192.168.31.100 is not alive
eth0 Down Speed :10 Half duplex
Link status/Get speed/Get duplex not mapped
ping failed; host 192.168.31.100 is not alive
eth0 Down Speed :10 Half duplex
Link status/Get speed/Get duplex not mapped
ping failed; host 192.168.31.100 is not alive
Ping test fail
eth0 Down Speed :1000 Full duplex
Link status/Get speed/Get duplex not mapped
======== dhcp failed, retry !========
|
|