WVR SD卡死活mount不上,USB没问题,求助!!

agui***

dmesg如下,
已加载mmc.o,fat.o,vfat.o,msdos.o 等驱动
mmc_driver_init: devfs_register_blkdev start
mmc_driver_init: devfs_register_blkdev finished, major_nr=121, rc=0
mmc_driver_init: blk_init_queue started
mmc_driver_init: blk_init_queue finished
mmc_driver_init: add_gendisk finished
mmc_driver_init: mmc_check_media start
mmc_check_media: old_state=mmc_media_detect=0
mmc_check_media: mmc_init start
mmc_init: mmc_hardware_init start
mmc Hardware init
mmc_hardware_init gpio_outen = *gpioaddr_enable finished
mmc Card init
mmc Card init *1*
mmc Card init *2*
Size = 2011136, hardsectsize = 1024, sectors = 2011136
Partition check:
mmc1a: p1
mmc_driver_init: mmc_check_media exit
~ # find /dev/mmc
~ # find /dev/mmc1
/dev/mmc1
/dev/mmc1/disc0
/dev/mmc1/disc0/disc
/dev/mmc1/disc0/part1
~ # mount /dev/mmc1/disc0/part1 /jffs/P1
~ # df
Filesystem           1k-blocks      Used Available Use% Mounted on
/dev/root                 3072      3072         0 100% /
/dev/mtdblock/4           4224       636      3588  15% /jffs
~ #
大家看看是怎么回事啊???

my***

mmc_driver_init: mmc_check_media exit

my***

我用一个多合一读卡器和５１２ＭＢ　　Mobile MMC 。　没问题

IT业***

建议对你的MMC卡重新分区，然后格式化为ext2

my***

我加载MMC卡到SD 接口也是很麻烦！