找回密码
 立即注册

QQ登录

只需一步,快速开始

搜索
广告投放联系QQ68610888
楼主: 深蓝基因

从源码编译支持玩客云的openwrt

 火.. [复制链接]
发表于 2019-12-27 13:58 | 显示全部楼层
jec123456 发表于 2019-8-6 18:03
楼主您的板子不是玩客云3的吧 和我手上的ttl的位置也不同

我的板和你一样,你有成功短接从sd卡启动吗

点评

dzw
[attachimg]332491[/attachimg]  详情 回复 发表于 2019-12-28 22:05
我的恩山、我的无线 The best wifi forum is right here.
回复

使用道具 举报

发表于 2019-12-27 14:01 | 显示全部楼层
bbao51 发表于 2019-10-17 22:09
老哥短接的两个点是用来进9008的吗

是用来改成从SD卡引导UBoot的用来改成从SD卡引导UBoot的
我的恩山、我的无线 The best wifi forum is right here.
回复

使用道具 举报

发表于 2019-12-28 11:24 | 显示全部楼层
楼主的运行环境还在吗? 在的话能把uboot-meson-next-2015-04-01-a77c4dec33.tar.gz部分打包上传下么 官方的好像没了  有的话麻烦上传下 非常感谢
我的恩山、我的无线 The best wifi forum is right here.
回复

使用道具 举报

发表于 2019-12-28 22:05 | 显示全部楼层
dzw 发表于 2019-12-27 13:58
我的板和你一样,你有成功短接从sd卡启动吗


本帖子中包含更多资源

您需要 登录 才可以下载或查看,没有账号?立即注册

×
我的恩山、我的无线 The best wifi forum is right here.
回复

使用道具 举报

发表于 2020-2-23 15:22 | 显示全部楼层



BusyBox v1.22.1 (2019-08-03 04:23:39 EDT) built-in shell (ash)
Enter 'help' for a list of built-in commands.

  _______                     ________        __
|       |.-----.-----.-----.|  |  |  |.----.|  |_
|   -   ||  _  |  -__|     ||  |  |  ||   _||   _|
|_______||   __|_____|__|__||________||__|  |____|
          |__| W I R E L E S S   F R E E D O M
-----------------------------------------------------
BARRIER BREAKER (Barrier Breaker, unknown)
-----------------------------------------------------
  * 1/2 oz Galliano         Pour all ingredients into
  * 4 oz cold Coffee        an irish coffee mug filled
  * 1 1/2 oz Dark Rum       with crushed ice. Stir.
  * 2 tsp. Creme de Cacao
-----------------------------------------------------
root@armbian:/# [   31.639619@3] netdev_open
[   31.646971@3] Ethernet reset
[   31.654731@3] NET MDA descpter start addr=ee83c000
[   31.663187@3] phy_interface = 1
[   31.670669@3] aml_phy_init:  trying to attach to 0:01
[   31.679888@3] --1--write mac add to:ef2f56c8: 00 01 23 cd ee af |..#...|
[   31.691679@3] name=emmc_key nand_key
[   31.700150@3] device name=nand_key open error
[   31.708569@3] aml_keys: version 0 can not be init c0b6b778
[   31.717877@3] name=emmc_key emmc_key
[   31.726912@2] emmc read lba=0x12020, blocks=0x100 OK!
[   31.732459@2] register_aes_algorithm:488,new way
[   31.739207@0] ret = -22
[   31.739207@0] print_buff=
[   31.749183@0] ret = 17
[   31.749183@0] print_buff=00:22:6D:50:64:06
[   31.759731@0] 0 : 0
[   31.764217@0] 1 : 34
[   31.768751@0] 2 : 109
[   31.773586@0] 3 : 80
[   31.778109@0] 4 : 100
[   31.782803@0] 5 : 6
[   31.787219@0] --2--write mac add to:ef2f56c8: 00 22 6d 50 64 06 |."mPd.|
[   31.793610@0] write mac add to:ef2f56c8: 00 22 6d 50 64 06 |."mPd.|
[   31.800129@0] Current DMA mode=0, set mode=621c100
[   31.805982@0] ether leave promiscuous mode
[   31.810586@0] ether leave all muticast mode
[   31.815063@0] changed the Multicast,mcount=2
[   31.819478@0] add mac address:33:33:00:00:00:01,bit=1
[   31.823669@0] add mac address:33:33:00:00:00:02,bit=22
[   31.828199@0] set hash low=400002,high=0
[   31.833157@0] changed the filter setting to :4
[   31.837697@0] changed the Multicast,mcount=2
[   31.841728@0] add mac address:33:33:00:00:00:01,bit=1
[   31.846079@0] add mac address:33:33:00:00:00:02,bit=22
[   31.851076@0] changed the Multicast,mcount=3
[   31.855202@0] add mac address:33:33:00:00:00:01,bit=1
[   31.860267@0] add mac address:33:33:00:00:00:02,bit=22
[   31.865357@0] add mac address:01:00:5e:00:00:01,bit=32
[   31.870535@0] set hash low=400002,high=1
[   31.874446@0] changed the filter setting to :4
[   31.878915@0] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   35.289943@3] libphy: 0:01 - Link is Up - 1000/Full
[   35.350629@3] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[   35.417047@3] changed the Multicast,mcount=4
[   35.425391@3] add mac address:33:33:00:00:00:01,bit=1
[   35.429409@3] add mac address:33:33:00:00:00:02,bit=22
[   35.434114@3] add mac address:01:00:5e:00:00:01,bit=32
[   35.439258@3] add mac address:33:33:ff:50:64:06,bit=33
[   35.444351@3] set hash low=400002,high=3
[   35.448555@3] changed the filter setting to :4
[   35.944176@2] changed the Multicast,mcount=5
[   35.947895@2] add mac address:33:33:00:00:00:01,bit=1
[   35.951606@2] add mac address:33:33:00:00:00:02,bit=22
[   35.956663@2] add mac address:01:00:5e:00:00:01,bit=32
[   35.961829@2] add mac address:33:33:ff:50:64:06,bit=33
[   35.966911@2] add mac address:33:33:00:01:00:02,bit=45
[   35.972053@2] set hash low=400002,high=2003
[   35.976192@2] changed the filter setting to :4
[   35.980715@2] changed the Multicast,mcount=6
[   35.984886@2] add mac address:33:33:00:00:00:01,bit=1
[   35.989952@2] add mac address:33:33:00:00:00:02,bit=22
[   35.995049@2] add mac address:01:00:5e:00:00:01,bit=32
[   36.000208@2] add mac address:33:33:ff:50:64:06,bit=33
[   36.005297@2] add mac address:33:33:00:01:00:02,bit=45
[   36.010439@2] add mac address:33:33:00:01:00:03,bit=55
[   36.015538@2] set hash low=400002,high=802003
[   36.019907@2] changed the filter setting to :4
[   37.019847@3] changed the Multicast,mcount=7
[   37.038465@3] add mac address:33:33:00:00:00:01,bit=1
[   37.057023@3] add mac address:33:33:00:00:00:02,bit=22
[   37.075279@3] add mac address:01:00:5e:00:00:01,bit=32
[   37.093306@3] add mac address:33:33:ff:50:64:06,bit=33
[   37.111187@3] add mac address:33:33:00:01:00:02,bit=45
[   37.122252@3] add mac address:33:33:00:01:00:03,bit=55
[   37.126829@3] add mac address:33:33:ff:00:00:00,bit=56
[   37.131964@3] set hash low=400002,high=1802003
[   37.136379@3] changed the filter setting to :4

root@OpenWrt:/# ifconfig
eth0      Link encap:Ethernet  HWaddr 00:22:6D:50:64:06
          inet addr:192.168.123.235  Bcast:192.168.123.255  Mask:255.255.255.0
          inet6 addr: fe80::222:6dff:fe50:6406/64 Scopeink
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:90 errors:0 dropped:0 overruns:0 frame:0
          TX packets:49 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000
          RX bytes:48968 (47.8 KiB)  TX bytes:4750 (4.6 KiB)
          Interrupt:40

lo        Link encapocal Loopback
          inet addr:127.0.0.1  Mask:255.0.0.0
          inet6 addr: ::1/128 Scope:Host
          UP LOOPBACK RUNNING  MTU:65536  Metric:1
          RX packets:80 errors:0 dropped:0 overruns:0 frame:0
          TX packets:80 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0
          RX bytes:6592 (6.4 KiB)  TX bytes:6592 (6.4 KiB)

root@OpenWrt:/# ls
bin      dev      init     mnt      proc     root     sys      usr      www
boot     etc      lib      overlay  rom      sbin     tmp      var
root@OpenWrt:/# ping 192.168.123.1
PING 192.168.123.1 (192.168.123.1): 56 data bytes
64 bytes from 192.168.123.1: seq=0 ttl=64 time=2.444 ms
64 bytes from 192.168.123.1: seq=1 ttl=64 time=2.047 ms
64 bytes from 192.168.123.1: seq=2 ttl=64 time=1.629 ms
64 bytes from 192.168.123.1: seq=3 ttl=64 time=1.466 ms
64 bytes from 192.168.123.1: seq=4 ttl=64 time=1.506 ms
^C
--- 192.168.123.1 ping statistics ---
5 packets transmitted, 5 packets received, 0% packet loss
round-trip min/avg/max = 1.466/1.818/2.444 ms
root@OpenWrt:/#
  老大你编译的固件 没web 管理  求支持的 rootfs 包

点评

关注下 没有后文了吗、?  详情 回复 发表于 2020-4-25 16:24
居然能获取到IP,还能PING,成功不远了啊,期待,各位加油!  详情 回复 发表于 2020-4-20 16:25
你这个是怎么获取到ip的,kernel、rootfs是用我编译的吗?  详情 回复 发表于 2020-2-25 10:31

评分

参与人数 2恩山币 +2 收起 理由
piaoyizy + 1 感谢你的分享,无论怎样,你都是最无私的人!来,说说,你E盘上还有啥一起给我吧!
炫蓝 + 1 加油,祝你早日成功!

查看全部评分

我的恩山、我的无线 The best wifi forum is right here.
回复

使用道具 举报

发表于 2020-2-24 12:04 | 显示全部楼层
希望各位大神赶紧研究成功。玩客云这个配置不做软路由有点可惜。
我的恩山、我的无线 The best wifi forum is right here.
回复

使用道具 举报

 楼主| 发表于 2020-2-25 10:31 | 显示全部楼层
honsices 发表于 2020-2-23 15:22
BusyBox v1.22.1 (2019-08-03 04:23:39 EDT) built-in shell (ash)
Enter 'help' for a list of bui ...

你这个是怎么获取到ip的,kernel、rootfs是用我编译的吗?
我的恩山、我的无线 The best wifi forum is right here.
回复

使用道具 举报

发表于 2020-3-28 18:16 | 显示全部楼层
感谢分享,感谢分享
我的恩山、我的无线 The best wifi forum is right here.
回复

使用道具 举报

发表于 2020-4-11 14:44 | 显示全部楼层
本帖最后由 MagicBean 于 2020-4-11 14:50 编辑

大佬,这个有后续吗?我照着你的编译试了试,卡在了下载一个linux-3.0的包上面,貌似Amlogic关闭下载还是删除了,总之下载的时候提示404,然后我去http://cdn.kernel.org/pub/linux/kernel下载了一个名字相同的包,可惜编译失败了。我看回复里挺多人说网卡问题是因为u-boot的原因,这里有个帖子也在说这个事情https://www.right.com.cn/forum/f ... wthread&tid=1345423,我在刷Armbian的时候发现就是这样,u-boot不对,怎么都驱动不了网卡。或者求大佬编译好的rootfs和boot文件

评分

参与人数 1恩山币 +1 收起 理由
炫蓝 + 1 奖励点小分,祝你早日成功

查看全部评分

我的恩山、我的无线 The best wifi forum is right here.
回复

使用道具 举报

发表于 2020-4-20 16:25 | 显示全部楼层
honsices 发表于 2020-2-23 15:22
BusyBox v1.22.1 (2019-08-03 04:23:39 EDT) built-in shell (ash)
Enter 'help' for a list of bui ...

居然能获取到IP,还能PING,成功不远了啊,期待,各位加油!
我的恩山、我的无线 The best wifi forum is right here.
回复

使用道具 举报

发表于 2020-4-20 16:41 | 显示全部楼层
炫蓝 发表于 2020-4-20 16:25
居然能获取到IP,还能PING,成功不远了啊,期待,各位加油!

加油,真希望赶紧研究成功让家里面吃灰的玩客云可以有所价值。
我的恩山、我的无线 The best wifi forum is right here.
回复

使用道具 举报

发表于 2020-4-25 16:24 | 显示全部楼层
honsices 发表于 2020-2-23 15:22
BusyBox v1.22.1 (2019-08-03 04:23:39 EDT) built-in shell (ash)
Enter 'help' for a list of bui ...

关注下 没有后文了吗、?
我的恩山、我的无线 The best wifi forum is right here.
回复

使用道具 举报

发表于 2020-4-29 12:21 | 显示全部楼层
make download 之后:

--2020-04-29 12:13:16--  http://openlinux.amlogic.com:800 ... 1-a77c4dec33.tar.gz
Connecting to 127.0.0.1:1080... connected.
Proxy request sent, awaiting response... 404 Not Found
2020-04-29 12:13:17 ERROR 404: Not Found.

uboot 被官方删了?
我的恩山、我的无线 The best wifi forum is right here.
回复

使用道具 举报

发表于 2020-5-6 10:12 | 显示全部楼层
网卡驱动和内核不匹配,现在能用的网卡驱动都是3.10内核,而且这个内核没有8021q,不支持vlan,sigh。。期待有人能做个高版本的内核和网卡驱动,把8021q能编进内核。
我的恩山、我的无线 The best wifi forum is right here.
回复

使用道具 举报

发表于 2020-5-6 14:49 | 显示全部楼层
大神们,加油啊
我的恩山、我的无线 The best wifi forum is right here.
回复

使用道具 举报

您需要登录后才可以回帖 登录 | 立即注册

本版积分规则

有疑问请添加管理员QQ86788181|手机版|小黑屋|Archiver|恩山无线论坛(常州市恩山计算机开发有限公司版权所有) ( 苏ICP备05084872号 )

GMT+8, 2024-3-28 19:37

Powered by Discuz! X3.5

© 2001-2024 Discuz! Team.

| 江苏省互联网有害信息举报中心 举报信箱:js12377 | @jischina.com.cn 举报电话:025-88802724 本站不良内容举报信箱:68610888@qq.com 举报电话:0519-86695797

快速回复 返回顶部 返回列表