各位老大指导一下小弟吧,帮忙看看TTL信息,小弟看不太懂~

ai***

各位老大,这是用TTL看到的路由信息,不过启动过程中按 Ctrl+C无法到输入界面,等到光标自己不动时还是无法输入任何字母, 咋回事?另外帮忙看看一下的信息,我看不懂啊~
ADAM2 Revision 0.22.10
(C) Copyright 1996-2003 Texas Instruments Inc. All Rights Reserved.
(C) Copyright 2003 Telogy Networks, Inc.
Usage: setmfreq [-d] [-s sys_freq, in MHz] [cpu_freq, in MHz]
Memory optimization Complete!

mac_init(): Find mac [00:14:BF:88:4D:49] in location 0
Find mac [00:14:BF:88:4D:49] in location 0
mac_value:00:14:BF:88:4D:49
tftpserver initialized

Adam2_AR7WRD >
Press any key to abort OS load, or wait 5 seconds for OS to boot...
Launching kernel decompressor.
Starting LZMA Uncompression Algorithm.
Copyright (C) 2003 Texas Instruments Incorporated; Copyright (C) 1999-2003 Igor Pavlov.
Compressed file is LZMA format.
Kernel decompressor was successful ... launching kernel.

LINUX started...
Config serial console: ttyS0,38400
Auto Detection SANGAM chip
WLAN 1130 chip configured.
CONFIG_AVALANCHE_VLYNQ_POLARITY_LOW
Failed to initialize the vlynq @ 0xa8611800.
The error msg: Error in configuring clocks..
CPU revision is: 00018448
Primary instruction cache 16kb, linesize 16 bytes (4 ways)
Primary data cache 16kb, linesize 16 bytes (4 ways)
Number of TLB entries 16.
Linux version 2.4.17_mvl21-malta-mips_fp_le (root@localhost.localdomain) (gcc version 2.95.3 20010315 (release/MontaVista)) #47 Thu Nov 6 12:26:19 CST 2008
Determined physical RAM map:
memory: 14000000 @ 00000000 (reserved)
memory: 00020000 @ 14000000 (ROM data)
memory: 00fe0000 @ 14020000 (usable)
On node 0 totalpages: 4096
zone(0): 4096 pages.
zone(1): 0 pages.
zone(2): 0 pages.
Kernel command line:
calculating r4koff... 000b71b0(750000)
CPU frequency 150.00 MHz
Calibrating delay loop... 149.91 BogoMIPS
Freeing Adam2 reserved memory [0x14001000,0x0001f000]
Memory: 13856k/16384k available (1910k kernel code, 2528k reserved, 139k data, 64k init)
Dentry-cache hash table entries: 2048 (order: 2, 16384 bytes)
Inode-cache hash table entries: 1024 (order: 1, 8192 bytes)
Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
Buffer-cache hash table entries: 1024 (order: 0, 4096 bytes)
Page-cache hash table entries: 4096 (order: 2, 16384 bytes)
Checking for 'wait' instruction...  unavailable.
POSIX conformance testing by UNIFIX
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
TI Optimizations: Allocating TI-Cached Memory Pool.
Warning: Number of buffers is not configured.Setting default to 512
Using 512 Buffers for TI-Cached Memory Pool.
DEBUG: Using Hybrid Mode.
NSP Optimizations: Succesfully allocated TI-Cached Memory Pool.
Initializing RT netlink socket
Starting kswapd
Disabling the Out Of Memory Killer
devfs: v1.7 (20011216) Richard Gooch (rgooch@atnf.csiro.au)
devfs: boot_options: 0x1
pty: 32 Unix98 ptys configured
Serial driver version 5.05c (2001-07-08) with no serial options enabled
ttyS00 at 0xa8610e00 (irq = 15) is a 16550A
ttyS01 at 0xa8610f00 (irq = 16) is a 16550A
block: 64 slots per queue, batch=16
CPMAC Auto Detect Enabled: detected external PHY and external switch as well..
Error getting CPMAC Configuration params for instance:0
Environment Variable:MACCFG_A not set in bootloader
Setting Default configuration params for CPMAC instance:0
Default Asymmetric MTU for eth0 1500
TI CPMAC Linux DDA version 1.8 - CPMAC DDC version 0.2
Cpmac: Installed 1 instances.
Cpmac driver is allocating buffer memory at init time.
PPP generic driver version 2.4.1
avalanche flash device: 0x400000 at 0x10000000.
Amd/Fujitsu Extended Query Table v1.1 at 0x0040
Physically mapped flash: Swapping erase regions for broken CFI table.
number of CFI chips: 1
Looking for mtd device :mtd0:
Found a mtd0 image (0xe0000), with size (0x310000).
Looking for mtd device :mtd1:
Found a mtd1 image (0x20000), with size (0xc0000).
Looking for mtd device :mtd2:
Found a mtd2 image (0x0), with size (0x20000).
Looking for mtd device :mtd3:
Found a mtd3 image (0x3f0000), with size (0x10000).
Looking for mtd device :mtd4:
Found a mtd4 image (0x20000), with size (0x3d0000).
Creating 5 MTD partitions on "hysically mapped flash":
0x000e0000-0x003f0000 : "mtd0"
0x00020000-0x000e0000 : "mtd1"
0x00000000-0x00020000 : "mtd2"
0x003f0000-0x00400000 : "mtd3"
0x00020000-0x003f0000 : "mtd4"
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 1024 bind 1024)
IPv4 over IPv4 tunneling driver
Default Asymmetric MTU for tunl0 1480
GRE over IPv4 tunneling driver
Default Asymmetric MTU for gre0 1476
Linux IP multicast router 0.06 plus PIM-SM
ip_conntrack version 2.1 (128 buckets, 1024 max) - 320 bytes per conntrack
ip_tables: (C) 2000-2002 Netfilter core team
netfilter PSD loaded - (c) astaro AG
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
NET4: Ethernet Bridge 008 for NET4.0
Initializing the WAN Bridge.
Please set the MAC Address for the WAN Bridge.
Set the Environment variable 'wan_br_mac'.
MAC Address should be in the following format: xx.xx.xx.xx.xx.xx
802.1Q VLAN Support v1.6  Ben Greear <greearb@candelatech.com>
vlan Initialization complete.
VFS: Mounted root (squashfs filesystem) readonly.
Mounted devfs on /dev
Freeing unused kernel memory: 64k freed
Firmware Version: 1.00.03-OSALL
Hit enter to continue...insmod: writemac.o: module not found
rmmod: writemac
killall: httpd: no process killed

Configured 19 states
now insmod tiatm
Warning: loading tiatm will taint the kernel: no license
  See http://www.tux.org/lkml/#export-tainted for information about tainted modules
002f440 00000002 00000002
       9421c014 94e9f4e0 94e9f480 940b4c6c 94fa8120 940b3918 94e9f6f8 00000000
       00000002 00000002 94e9f6f8 00000000 94fa8120 94e9f6f8 00000001 940b4da4
       80017f08 800011a8 800043d0 800043c0 6c736461 80000e00 80000f4c 80000fdc
       80000ff4 ...
Call Trace: [<941aece0>] [<941aed9c>] [<940b4504>] [<94051d7c>] [<c002f440>] [<940b4c6c>]
[<940b3918>] [<940b4da4>] [<940b4eb8>] [<c00292f4>] [<c00203e0>] [<9419a5e0>]
[<9403bb7c>] [<941a85b8>] [<941a9a15>] [<941ab6ac>] [<9402bc88>] [<9402bc9c>]
[<941a9bb0>] [<941a9bac>] [<9402f100>] [<941ab644>] [<940516c0>] [<940516c0>]
[<c002f440>] [<940b4504>] [<94030b38>] [<941aecf5>] [<940b4504>] [<941aecf5>]
[<940516c0>] [<940516c0>] [<941aece0>] [<941aed9c>] [<940b4504>] [<94051d7c>]
[<c002f440>] [<940b4c6c>] [<94<4>kernel BUG at slab.c:1112!
kernel BUG at slab.c:1112!
Unable to handle kernel paging request at virtual address 00000000, epc == 940516c0, ra == 940516c0
Oops in fault.c:do_page_fault, line 204:
$0 : 00000000 1000fc00 0000001b 00000001 00000000 00002134 00000001 00000000
$8 : 00000000 00000000 94e9eb09 00000000 94231539 fffffff8 94e9eac3 ffffffff
$16: 00000000 000001f0 942970a0 000001f0 94335240 940b4504 00000004 0000000d
$24: 0000000a 00000003                   94e9e000 94e9ec00 00000060 940516c0
Hi : 00000000
Lo : 00000e00
epc  : 940516c0    Tainted: P
Status: 1000fc02
Cause : 1080800c
Process insmod (pid: 12, stackpage=94e9e000)
Stack: 941aece0 941aed9c 00000458 942970b0 942970a0 942970a8 000001f0 00000000
       94335240 940b4504 94051d7c 0000000d c0030390 c00302b8 00000002 00000002
       9421c014 94e9ecf0 94e9ec90 940b4c6c 94335240 940b3918 942970a0 000001f0
       00000002 00000002 942970a0 000001f0 94335240 940b4504 00000004 940b4da4
       80017f08 800011a8 800043d0 800043c0 6c736461 80000e00 80000f4c 80000fdc
       80000ff4 ...
Call Trace: [<941aece0>] [<941aed9c>] [<940b4504>] [<94051d7c>] [<c0030390>] [<c00302b8>]
[<940b4c6c>] [<940b3918>] [<940b4504>] [<940b4da4>] [<940b4eb8>] [<c00292f4>]
[<c00203e0>] [<940b4504>] [<9419a5e0>] [<9403bb7c>] [<941a85b8>] [<940b4504>]
[<940516c0>] [<94030b2c>] [<94034f00>] [<940b4504>] [<941aecf5>] [<940516c0>]
[<940516c0>] [<941aece0>] [<941aed9c>] [<940b4504>] [<94051d7c>] [<c0030390>]
[<c00302b8>] [<940b4c6c>] [<940b3918>] [<940b4da4>] [<940b4eb8>]

Code: 24a5ed9c  0d00d446  24060458 <ae000000> 24020020  16620002  24150001  24150003  40056000
Kernel panic: Aiee, killing interrupt handler!
In interrupt handler - not syncing

baofe***

不好意思！我现在刚学这方面的知识！我想一定会有高人会的！
祝你好运！

ai***

这个论坛的人啊~哎~