找回密码
 立即注册

QQ登录

只需一步,快速开始

搜索
广告投放联系QQ68610888
查看: 2061|回复: 6

[k3] 求救大佬 我CFE降级出现问题 ,貌似数据都有问题 怎么办

[复制链接]
Digital core power voltage set to 1.05V
Decompressing...done


CFE version 7.14.131.47 (r629548) based on BBP 1.0.37 for BCM947XX (32bit,SP,)
Build Date: Wed May 24 15:44:17 CST 2017 (jenkins@SOHO-OPWRT)
Copyright (C) 2000-2008 Broadcom Corporation.

Init Arena
Init Devs.
Boot partition size = 262144(0x40000)
DDR Clock: 400 MHz
Warning: invalid DDR setting of 0 MHz ignored. DDR frequency will be set to 400 MHz.
Warning: invalid CPU setting of 0 MHz ignored. armclock frequency will be set to 800 MHz.
CPU type 0x0: 800MHz
Tot mem: 524288 KBytes

CFE mem:    0x00F00000 - 0x017D1E30 (9248304)
Data:       0x00F6A204 - 0x00F6A7D0 (1484)
BSS:        0x00F6A7E0 - 0x00FCFE30 (415312)
Heap:       0x00FCFE30 - 0x017CFE30 (8388608)
Stack:      0x017CFE30 - 0x017D1E30 (8192)
Text:       0x00F00000 - 0x00F5DE2C (384556)

Loader:raw Filesys:raw Dev:nflash0.os File: Optionsnull)
Loading: ... 1636889 bytes read
Entry at 0x00008000
Starting program at 0x00008000
Uncompressing Linux... done, booting the kernel.
[    0.000000] Booting Linux on physical CPU 0x0
[    0.000000] Linux version 4.9.77 (lede@ubuntu) (gcc version 5.5.0 (OpenWrt GCC 5.5.0 r6102-23a0f8aaad) ) #0 SMP Thu Jan 25 12:45:48 2018
[    0.000000] CPU: ARMv7 Processor [413fc090] revision 0 (ARMv7), cr=10c5387d
[    0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[    0.000000] OF: fdt:Machine model: PHICOMM K3
[    0.000000] Memory policy: Data cache writealloc
[    0.000000] percpu: Embedded 12 pages/cpu @c6bd8000 s17868 r8192 d23092 u49152
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 130816
[    0.000000] Kernel command line: console=ttyS0,115200
[    0.000000] PID hash table entries: 512 (order: -1, 2048 bytes)
[    0.000000] Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
[    0.000000] Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
[    0.000000] Memory: 514768K/524288K available (3564K kernel code, 110K rwdata, 920K rodata, 236K init, 293K bss, 9520K reserved, 0K cma-reserved, 393216K highmem)
[    0.000000] Virtual kernel memory layout:
[    0.000000]     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
[    0.000000]     fixmap  : 0xffc00000 - 0xfff00000   (3072 kB)
[    0.000000]     vmalloc : 0xc8800000 - 0xff800000   ( 880 MB)
[    0.000000]     lowmem  : 0xc0000000 - 0xc8000000   ( 128 MB)
[    0.000000]     pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)
[    0.000000]     modules : 0xbf000000 - 0xbfe00000   (  14 MB)
[    0.000000]       .text : 0xc0008000 - 0xc03833c8   (3565 kB)
[    0.000000]       .init : 0xc046b000 - 0xc04a6000   ( 236 kB)
[    0.000000]       .data : 0xc04a6000 - 0xc04c1900   ( 111 kB)
[    0.000000]        .bss : 0xc04c1900 - 0xc050ae84   ( 294 kB)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[    0.000000] Hierarchical RCU implementation.
[    0.000000] NR_IRQS:16 nr_irqs:16 16
[    0.000000] L2C: DT/platform modifies aux control register: 0x0a130000 -> 0x0a530000
[    0.000000] L2C-310 enabling early BRESP for Cortex-A9
[    0.000000] L2C-310 full line of zeros enabled for Cortex-A9
[    0.000000] L2C-310 ID prefetch enabled, offset 1 lines
[    0.000000] L2C-310 dynamic clock gating enabled, standby mode enabled
[    0.000000] L2C-310 cache controller enabled, 16 ways, 256 kB
[    0.000000] L2C-310: CACHE_ID 0x410000c8, AUX_CTRL 0x7e530001
[    0.000017] sched_clock: 64 bits at 400MHz, resolution 2ns, wraps every 4398046511103ns
[    0.000043] clocksource: arm_global_timer: mask: 0xffffffffffffffff max_cycles: 0x5c4093a7d1, max_idle_ns: 440795210635 ns
[    0.000077] Switching to timer-based delay loop, resolution 2ns
[    0.000308] Calibrating delay loop (skipped), value calculated using timer frequency.. 800.00 BogoMIPS (lpj=4000000)
[    0.000324] pid_max: default: 32768 minimum: 301
[    0.000420] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.000432] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.001051] CPU: Testing write buffer coherency: ok
[    0.001422] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
[    0.001490] Setting up static identity map for 0x82a0 - 0x82d4
[    0.003466] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
[    0.003592] Brought up 2 CPUs
[    0.003617] SMP: Total of 2 processors activated (1600.00 BogoMIPS).
[    0.003628] CPU: WARNING: CPU(s) started in wrong/inconsistent modes (primary CPU mode 0x13)
[    0.003635] CPU: This may indicate a broken bootloader or firmware.
[    0.006123] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[    0.006156] futex hash table entries: 512 (order: 3, 32768 bytes)
[    0.006338] pinctrl core: initialized pinctrl subsystem
[    0.006809] NET: Registered protocol family 16
[    0.007609] DMA: preallocated 256 KiB pool for atomic coherent allocations
[    0.043115] clocksource: Switched to clocksource arm_global_timer
[    0.044398] NET: Registered protocol family 2
[    0.045115] TCP established hash table entries: 1024 (order: 0, 4096 bytes)
[    0.045145] TCP bind hash table entries: 1024 (order: 1, 8192 bytes)
[    0.045171] TCP: Hash tables configured (established 1024 bind 1024)
[    0.045251] UDP hash table entries: 256 (order: 1, 8192 bytes)
[    0.045293] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
[    0.045515] NET: Registered protocol family 1
[    0.047276] Crashlog allocated RAM at address 0x3f00000
[    0.048312] workingset: timestamp_bits=30 max_order=17 bucket_order=0
[    0.054059] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    0.054085] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
[    0.056417] bounce: pool size: 64 pages
[    0.056439] io scheduler noop registered
[    0.056448] io scheduler deadline registered (default)
[    0.057268] Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled
[    0.058155] console [ttyS0] disabled
[    0.058242] 18000300.serial: ttyS0 at MMIO 0x18000300 (irq = 18, base_baud = 7812500) is a 16550
[    0.509675] console [ttyS0] enabled
[    0.513790] 18000400.serial: ttyS1 at MMIO 0x18000400 (irq = 18, base_baud = 7812500) is a 16550
[    0.524075] nand: device found, Manufacturer ID: 0xc2, Chip ID: 0xf1
[    0.530507] nand: Macronix MX30LF1G18AC
[    0.534352] nand: 128 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64
[    0.541975] iproc_nand 18028000.nand: detected 128MiB total, 128KiB blocks, 2KiB pages, 16B OOB, 8-bit, BCH-4
[    0.551954] Scanning device for bad blocks
[    0.575303] random: fast init done
[    1.082448] Bad eraseblock 854 at 0x000006ac0000
[    1.630454] random: crng init done
[    1.692327] 4 bcm47xxpart partitions found on MTD device brcmnand.0
[    1.698616] Creating 4 MTD partitions on "brcmnand.0":
[    1.703792] 0x000000000000-0x000000080000 : "boot"
[    1.709753] 0x000000080000-0x000000180000 : "nvram"
[    1.715749] 0x000000180000-0x000000400000 : "phicomm"
[    1.721987] 0x000000400000-0x000008000000 : "firmware"
[    1.729658] 2 trx partitions found on MTD device firmware
[    1.735125] Creating 2 MTD partitions on "firmware":
[    1.740116] 0x00000000001c-0x000000400000 : "linux"
[    1.746169] 0x000000400000-0x000007c00000 : "ubi"
[    1.754412] libphy: Fixed MDIO Bus: probed
[    1.758631] bgmac_bcma: Broadcom 47xx GBit MAC driver loaded
[    1.764904] bcma: bus0: Found chip with id 53030, rev 0x00 and package 0x00
[    1.772018] bcma: bus0: Core 0 found: ChipCommon (manuf 0x4BF, id 0x800, rev 0x2A, class 0x0)
[    1.780766] bcma: bus0: Core 1 found: Chipcommon B (manuf 0x4BF, id 0x50B, rev 0x05, class 0x0)
[    1.789646] bcma: bus0: Core 2 found: DMA (manuf 0x4BF, id 0x502, rev 0x04, class 0x0)
[    1.797803] bcma: bus0: Core 3 found: GBit MAC (manuf 0x4BF, id 0x82D, rev 0x07, class 0x0)
[    1.806409] bcma: bus0: Core 4 found: GBit MAC (manuf 0x4BF, id 0x82D, rev 0x07, class 0x0)
[    1.814997] bcma: bus0: Core 5 found: GBit MAC (manuf 0x4BF, id 0x82D, rev 0x07, class 0x0)
[    1.823585] bcma: bus0: Core 6 found: GBit MAC (manuf 0x4BF, id 0x82D, rev 0x07, class 0x0)
[    1.832086] bcma: bus0: Core 7 found: PCIe Gen 2 (manuf 0x4BF, id 0x501, rev 0x07, class 0x0)
[    1.840802] bcma: bus0: Core 8 found: PCIe Gen 2 (manuf 0x4BF, id 0x501, rev 0x07, class 0x0)
[    1.849524] bcma: bus0: Core 9 found: PCIe Gen 2 (manuf 0x4BF, id 0x501, rev 0x07, class 0x0)
[    1.858255] bcma: bus0: Core 10 found: ARM Cortex A9 core (ihost) (manuf 0x4BF, id 0x510, rev 0x07, class 0x0)
[    1.868449] bcma: bus0: Core 11 found: USB 2.0 (manuf 0x4BF, id 0x504, rev 0x07, class 0x0)
[    1.876995] bcma: bus0: Core 12 found: USB 3.0 (manuf 0x4BF, id 0x505, rev 0x07, class 0x0)
[    1.885543] bcma: bus0: Core 13 found: SDIO3 (manuf 0x4BF, id 0x503, rev 0x01, class 0x0)
[    1.893923] bcma: bus0: Core 14 found: I2S (manuf 0x4BF, id 0x834, rev 0x03, class 0x0)
[    1.902118] bcma: bus0: Core 15 found: ARM Cortex A9 JTAG (manuf 0x4BF, id 0x506, rev 0x01, class 0x0)
[    1.911622] bcma: bus0: Core 16 found: Denali DDR2/DDR3 memory controller (manuf 0x4BF, id 0x507, rev 0x01, class 0x0)
[    1.922512] bcma: bus0: Core 17 found: ROM (manuf 0x4BF, id 0x508, rev 0x08, class 0x0)
[    1.930737] bcma: bus0: Core 18 found: NAND flash controller (manuf 0x4BF, id 0x509, rev 0x01, class 0x0)
[    1.940486] bcma: bus0: Core 19 found: SPI flash controller (manuf 0x4BF, id 0x50A, rev 0x01, class 0x0)
[    1.950006] bcma: bus0: Flash type not supported
[    1.956800] bgmac_bcma bcma0:3: Found PHY addr: 0
[    1.961649] bgmac_bcma bcma0:3: Invalid MAC addr: 00:00:00:00:00:00
[    1.967943] bgmac_bcma bcma0:3: Using random MAC: b2:2e:14:07:ee:c1


我的恩山、我的无线 The best wifi forum is right here.
 楼主| | 显示全部楼层
求救大佬帮忙看看  急等
我的恩山、我的无线 The best wifi forum is right here.
回复

使用道具 举报

 楼主| | 显示全部楼层
有没有大佬帮忙的
我的恩山、我的无线 The best wifi forum is right here.
回复

使用道具 举报

你怎么操作的,cfe参数丢失坏了,刷个别人的备份然后改下mac即可。
我的恩山、我的无线 The best wifi forum is right here.
回复

使用道具 举报

 楼主| | 显示全部楼层
ikbszj75089 发表于 2019-4-8 18:05
你怎么操作的,cfe参数丢失坏了,刷个别人的备份然后改下mac即可。

无法输入

点评

ttl接触不良,重接线,换软件,还不行就换人,这不是路由的事。  详情 回复 发表于 2019-4-8 22:01
我的恩山、我的无线 The best wifi forum is right here.
回复

使用道具 举报


ttl接触不良,重接线,换软件,还不行就换人,这不是路由的事。
我的恩山、我的无线 The best wifi forum is right here.
回复

使用道具 举报

 楼主| | 显示全部楼层
肯定路由的事情啊  我有很多台路由器  一直用这个线  就这个路由器有问题   
我的恩山、我的无线 The best wifi forum is right here.
回复

使用道具 举报

您需要登录后才可以回帖 登录 | 立即注册

本版积分规则

关闭

欢迎大家光临恩山无线论坛上一条 /1 下一条

有疑问请添加管理员QQ86788181|手机版|小黑屋|Archiver|恩山无线论坛(常州市恩山计算机开发有限公司版权所有) ( 苏ICP备05084872号 )

GMT+8, 2024-4-29 06:39

Powered by Discuz! X3.5

© 2001-2024 Discuz! Team.

| 江苏省互联网有害信息举报中心 举报信箱:js12377 | @jischina.com.cn 举报电话:025-88802724 本站不良内容举报信箱:68610888@qq.com 举报电话:0519-86695797

快速回复 返回顶部 返回列表