linksys wrt150n v1.1 故障求助

空手***

买旧的，来了以后不启动，ttl有反应。

后在坛友pp316com帮助下得了原厂固件,表示感谢！！，tftp显示上传成功，但仍然启动不起来，已经tftp很多次，可启动过程还是那样


请教一下大家这是什么问题呀


Start to blink diag led ...

CFE version 1.0.37 for BCM947XX (32bit,SP,LE)
Build Date: Sat Jun 23 20:55:25 CST 2007 (root@localhost.localdomain)
Copyright (C) 2000,2001,2002,2003 Broadcom Corporation.
Initializing Arena
Initializing Devices.
No DPN
This is a Parallel Flash
Boot partition size = 262144(0x40000)
Partition information:
boot    #00   00000000 -> 0003FFFF  (262144)
trx     #01   00040000 -> 0004001B  (28)
os      #02   0004001C -> 003F7FFF  (3899364)
nvram   #03   003F8000 -> 003FFFFF  (32768)
Partition information:
boot    #00   00000000 -> 0003FFFF  (262144)
trx     #01   00040000 -> 003F7FFF  (3899392)
nvram   #02   003F8000 -> 003FFFFF  (32768)
et0: Broadcom BCM47xx 10/100 Mbps Ethernet Controller 4.150.10.5
et1: Broadcom BCM47xx 10/100 Mbps Ethernet Controller 4.150.10.5
CPU type 0x29006: 264MHz
Total memory: 16384 KBytes
Total memory used by CFE:  0x80700000 - 0x80796350 (615248)
Initialized Data:          0x8072D1A0 - 0x8072F900 (10080)
BSS Area:                  0x8072F900 - 0x80730350 (2640)
Local Heap:                0x80730350 - 0x80794350 (409600)
Stack Area:                0x80794350 - 0x80796350 (8192)
Text (code) segment:       0x80700000 - 0x8072D1A0 (184736)
Boot area (physical):      0x00797000 - 0x007D7000
Relocation Factor:         I:00000000 - D:00000000
Boot version: v4.5
The boot is CFE
mac_init(): Find mac [00:1d:7e:47:b0:69] in location 0
Nothing...
CMD: [ifconfig eth0 -addr=192.168.1.1 -mask=255.255.255.0]
Device eth0:  hwaddr 00-1D-7E-47-B0-69, ipaddr 192.168.1.1, mask 255.255.255.0
        gateway not set, nameserver not set
CMD: [go;]
Check CRC of image1
  Len:     0x2AF000     (2813952)       (0xBC040000)
  Offset0: 0x1C         (28)            (0xBC04001C)
  Offset1: 0x8A4        (2212)  (0xBC0408A4)
  Offset2: 0x82E14      (536084)        (0xBC0C2E14)
  Header CRC:    0xBFC4D931
  Calculate CRC: 0x79146281
Boot program checksum is invalid
CMD: [flash -ctheader : flash1.trx]
Reading :: _tftpd_open(): retries=0/3
_tftpd_open(): retries=1/3
_tftpd_open(): retries=2/3
Failed.: Timeout occured
CMD: [flash -ctheader : flash1.trx]
Reading :: _tftpd_open(): retries=0/3
_tftpd_open(): retries=1/3
_tftpd_open(): retries=2/3
Failed.: Timeout occured


就这么一直往复。。。。请大家不吝赐教

空手***

没有朋友帮助么？

空手***

我失落了{:soso_e150:}