设为首页收藏本站

简体中文 繁體中文 English 日本語 Deutsch 한국 사람 بالعربية TÜRKÇE português คนไทย

切换到窄版

 找回密码
 立即注册

QQ登录

只需一步，快速开始

搜索
恩山无线论坛»论坛 › 无线设备硬件相关板块 › tenda腾达无线路由器以及腾达其它网络设备 › Shibby 112 增强：支持5G, Tenda N60, W1800R固件 ...
广告投放联系QQ68610888
12345678下一页
返回列表 发新帖
楼主: bwq***

Shibby 112 增强：支持5G, Tenda N60, W1800R固件

[复制链接]
bwq***
 楼主| | 显示全部楼层
frontwing 发表于 2013-9-14 21:03
这个，网络条件不同没啥可比性吧
联通光纤，使用联通DNS

直接ping路由器IP地址呢？
我的恩山、我的无线 The best wifi forum is right here.
回复

使用道具 举报

fron***
| 显示全部楼层
bwq518 发表于 2013-9-14 21:04
直接ping路由器IP地址呢？

ping外网地址和192.168.1.1都是1ms以内
我的恩山、我的无线 The best wifi forum is right here.
回复

使用道具 举报

| 显示全部楼层
bwq518 发表于 2013-9-14 20:46
Sorry.

TTL输出什么信息？

额 忘截了 我只是记得好像列了broadcom ethernet switch （路由器5个switch同时亮）之后 说什么 eth1 eth0 files exist? 然后面板上就剩下电源亮着，倒数第三盏灯闪了，网线插上没有反应
赶明刷了之后再截给你。 感谢一切为了w1800r 的tomato固件的完善做出贡献的人
我的恩山、我的无线 The best wifi forum is right here.
回复

使用道具 举报

gilt***
| 显示全部楼层
tomato-Tenda-W1800R_112--20130914.Hyzoom.RT_AC-16M-W1800R-AIO-AR-TR-PY-GAE-64K.trx
刷了过后LAN口不通电了，就启动的时候通会电，过后就不行了。
我的恩山、我的无线 The best wifi forum is right here.
回复

使用道具 举报

die***
| 显示全部楼层
我的netgear 3500 v1 提示 File is too big to fit in MTD，怎么办啊
我的恩山、我的无线 The best wifi forum is right here.
回复

使用道具 举报

bwq***
 楼主| | 显示全部楼层
die4sth 发表于 2013-9-14 22:24
我的netgear 3500 v1 提示 File is too big to fit in MTD，怎么办啊

3500v1刷0805的专用固件即可。
我的恩山、我的无线 The best wifi forum is right here.
回复

使用道具 举报

bwq***
 楼主| | 显示全部楼层
gilthanas 发表于 2013-9-14 22:11
tomato-Tenda-W1800R_112--20130914.Hyzoom.RT_AC-16M-W1800R-AIO-AR-TR-PY-GAE-64K.trx
刷了过后LAN口不 ...

手里没这路由器真不行，无法调试。

从淘宝买了一台W1800R，明天能送到，等调试好后，再分享给大家吧。
我的恩山、我的无线 The best wifi forum is right here.
回复

使用道具 举报

bwq***
 楼主| | 显示全部楼层
frontwing 发表于 2013-9-14 21:14
ping外网地址和192.168.1.1都是1ms以内

很好，高ping值的问题已经解决了。
我的恩山、我的无线 The best wifi forum is right here.
回复

使用道具 举报

ei***
| 显示全部楼层
本帖最后由 eivs 于 2013-9-14 23:30 编辑

腾达n60的flash是8m的！我是改了16m刷成功的......没有改的不要刷16m的

点评

zsxiaojz
我的也是N60你的网卡认千兆吗。怎么我的网卡显示是100M  详情 回复 发表于 2015-1-24 17:24
我的恩山、我的无线 The best wifi forum is right here.
回复

使用道具 举报

YG***
| 显示全部楼层
下载了AC66U最新版本的,好像没有什么区别,PING还是一样哦大大
我的恩山、我的无线 The best wifi forum is right here.
回复

使用道具 举报

bwq***
 楼主| 来自手机 | 显示全部楼层
YG777 发表于 2013-9-14 23:36
下载了AC66U最新版本的,好像没有什么区别,PING还是一样哦大大

有大侠用新版ping值在1毫秒以内的，看看你的网络环境？
我的恩山、我的无线 The best wifi forum is right here.
回复

使用道具 举报

| 显示全部楼层
本帖最后由 nicholaswu 于 2013-9-15 08:26 编辑
bwq518 发表于 2013-9-14 20:46
Sorry.

TTL输出什么信息？

正常的tomato输出：
  1. in function loader()
  2. Loader buf 82000000:0x20420001
  3. LZMA Decompressing...inbase :0x9c00ad14, input_len : 0x13df1, outbuf : 0x8200000                                                                                                 0, bytes_out : 0x6000000
  4. done


  7. CFE version 5.100.138.22 based on BBP 1.0.37 for BCM947XX (32bit,SP,LE)
  8. Build Date: Fri Feb  1 19:45:16 CST 2013 (root@linux-svzy-cj)
  9. Copyright (C) 2000-2008 Broadcom Corporation.

  11. Init Arena
  12. Init Devs.
  13. Boot partition size = 131072(0x20000)
  14. get flash id : 0x17
  15. Found an ST compatible serial flash with 256 64KB blocks; total size 16MB
  16. get flash id : 0x17
  17. get flash id : 0x17
  18. CJ++ robo_reset
  19. et0: Broadcom BCM47XX 10/100/1000 Mbps Ethernet Controller 5.100.138.22
  20. CPU type 0x19749: 600MHz
  21. Tot mem: 131072 KBytes

  23. CFE mem:    0x82000000 - 0x82098970 (625008)
  24. Data:       0x8202E790 - 0x820319E0 (12880)
  25. BSS:        0x820319E0 - 0x82032970 (3984)
  26. Heap:       0x82032970 - 0x82096970 (409600)
  27. Stack:      0x82096970 - 0x82098970 (8192)
  28. Text:       0x82000000 - 0x8202E790 (190352)

  30. Committing NVRAM...done
  31. Waiting for reset button release...done
  32. Device eth0:  hwaddr C8-3A-35-5F-DB-B0, ipaddr 192.168.1.1, mask 255.255.255.0
  33.         gateway not set, nameserver not set
  34. Loader:raw Filesys:raw Dev:flash0.os File: Options:(null)
  35. Loading: CJ++ defined LZMA
  36. CJ++ using lzma
  37. .. 3314248 bytes read
  38. Entry at 0x80001000
  39. Closing network.
  40. Starting program at 0x80001000
  41. Linux version 2.6.22.19 (root@asus) (gcc version 4.2.4) #1 Thu Sep 12 18:17:56 EDT 2013
  42. CPU revision is: 00019749
  43. Found an ST compatible serial flash with 256 64KB blocks; total size 16MB
  44. Determined physical RAM map:
  45. memory: 07fff000 @ 00000000 (usable)
  46. memory: 08000000 @ 87fff000 (usable)
  47. Zone PFN ranges:
  48.   Normal          0 ->   131072
  49.   HighMem    131072 ->   589823
  50. early_node_map[2] active PFN ranges
  51.     0:        0 ->    32767
  52.     0:   557055 ->   589823
  53. Built 1 zonelists.  Total pages: 65535
  54. Kernel command line: root=/dev/mtdblock2 noinitrd console=ttyS0,115200
  55. Primary instruction cache 32kB, physically tagged, 4-way, linesize 32 bytes.
  56. Primary data cache 32kB, 4-way, linesize 32 bytes.
  57. Synthesized TLB refill handler (20 instructions).
  58. Synthesized TLB load handler fastpath (32 instructions).
  59. Synthesized TLB store handler fastpath (32 instructions).
  60. Synthesized TLB modify handler fastpath (31 instructions).
  61. PID hash table entries: 512 (order: 9, 2048 bytes)
  62. CPU: BCM5300 rev 1 pkg 0 at 600 MHz
  63. Using 300.000 MHz high precision timer.
  64. console [ttyS0] enabled
  65. Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
  66. Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
  67. Memory: 254916k/131068k available (2641k kernel code, 6928k reserved, 391k data, 204k init, 131072k highmem)
  68. Mount-cache hash table entries: 512
  69. NET: Registered protocol family 16
  70. usbcore: registered new interface driver usbfs
  71. usbcore: registered new interface driver hub
  72. usbcore: registered new device driver usb
  73. PCI: Initializing host
  74. PCI: Reset RC
  75. PCI: Initializing host
  76. PCI: Reset RC
  77. PCI: Fixing up bus 0
  78. PCI/PCIe coreunit 0 is set to bus 1.
  79. PCI: Fixing up bridge
  80. PCI: Fixing up bridge
  81. PCI: Enabling device 0000:01:00.1 (0004 -> 0006)
  82. PCI: Fixing up bus 1
  83. PCI/PCIe coreunit 1 is set to bus 2.
  84. PCI: Fixing up bridge
  85. PCI: Fixing up bridge
  86. PCI: Enabling device 0000:02:00.1 (0004 -> 0006)
  87. PCI: Fixing up bus 2
  88. NET: Registered protocol family 2
  89. Time: MIPS clocksource has been installed.
  90. IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
  91. TCP established hash table entries: 4096 (order: 3, 32768 bytes)
  92. TCP bind hash table entries: 4096 (order: 2, 16384 bytes)
  93. TCP: Hash tables configured (established 4096 bind 4096)
  94. TCP reno registered
  95. highmem bounce pool size: 64 pages
  96. squashfs: version 3.2-r2 (2007/01/15) Phillip Lougher
  97. io scheduler noop registered (default)
  98. HDLC line discipline: version $Revision: 4.8 $, maxframe=4096
  99. N_HDLC line discipline registered.
  100. Serial: 8250/16550 driver $Revision: 1.90 $ 2 ports, IRQ sharing disabled
  101. serial8250: ttyS0 at MMIO 0xb8000300 (irq = 8) is a 16550A
  102. serial8250: ttyS1 at MMIO 0xb8000400 (irq = 8) is a 16550A
  103. PPP generic driver version 2.4.2
  104. MPPE/MPPC encryption/compression module registered
  105. NET: Registered protocol family 24
  106. PPPoL2TP kernel driver, V0.18.3
  107. PPTP driver version 0.8.5
  108. pflash: found no supported devices
  109. Creating 5 MTD partitions on "sflash":
  110. 0x00000000-0x00020000 : "pmon"
  111. 0x00020000-0x00ff0000 : "linux"
  112. 0x0014c890-0x00b40000 : "rootfs"
  113. 0x00ff0000-0x01000000 : "nvram"
  114. 0x00b60000-0x00ff0000 : "jffs2"
  115. dev_nvram_init: _nvram_init
  116. _nvram_init: allocat size= 65536
  117. usbcore: registered new interface driver hiddev
  118. usbcore: registered new interface driver usbhid
  119. drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
  120. u32 classifier
  121.     OLD policer on
  122. Netfilter messages via NETLINK v0.30.
  123. nf_conntrack version 0.5.0 (2048 buckets, 16384 max)
  124. ip_tables: (C) 2000-2006 Netfilter Core Team
  125. ipt_account 0.1.21 : Piotr Gasidlo <quaker@barbara.eu.org>, http://www.barbara.eu.org/~quaker/ipt_account/
  126. net/ipv4/netfilter/tomato_ct.c [Sep 12 2013 18:17:40]
  127. NET: Registered protocol family 1
  128. NET: Registered protocol family 10
  129. ip6_tables: (C) 2000-2006 Netfilter Core Team
  130. NET: Registered protocol family 17
  131. 802.1Q VLAN Support v1.8 Ben Greear <greearb@candelatech.com>
  132. All bugs added by David S. Miller <davem@redhat.com>
  133. VFS: Mounted root (squashfs filesystem) readonly.
  134. Freeing unused kernel memory: 204k freed
  135. Warning: unable to open an initial console.
  136. emf: module license 'Proprietary' taints kernel.
  137. et_module_init: passivemode set to 0x0
  138. et_module_init: et_txq_thresh set to 0x0
  139. bcm_robo_enable_switch: EEE is enabled
  140. eth0: Broadcom BCM47XX 10/100/1000 Mbps Ethernet Controller 6.30.102.9 (r366174)
  141. PCI: Enabling device 0000:01:01.0 (0000 -> 0002)
  142. eth1: Broadcom BCM4360 802.11 Wireless Controller 6.30.102.9 (r366174)
  143. PCI: Enabling device 0000:02:01.0 (0000 -> 0002)
  144. eth2: Broadcom BCM4331 802.11 Wireless Controller 6.30.102.9 (r366174)
  145. / # lo: File exists
复制代码
914的ttl输出（启动失败）：
  1. in function loader()
  2. Loader buf 82000000:0x2a5d4011
  3. LZMA Decompressing...inbase :0x9c00ad14, input_len : 0x13df1, outbuf : 0x8200000                                                                                                 0, bytes_out : 0x6000000
  4. done


  7. CFE version 5.100.138.22 based on BBP 1.0.37 for BCM947XX (32bit,SP,LE)
  8. Build Date: Fri Feb  1 19:45:16 CST 2013 (root@linux-svzy-cj)
  9. Copyright (C) 2000-2008 Broadcom Corporation.

  11. Init Arena
  12. Init Devs.
  13. Boot partition size = 131072(0x20000)
  14. get flash id : 0x17
  15. Found an ST compatible serial flash with 256 64KB blocks; total size 16MB
  16. get flash id : 0x17
  17. get flash id : 0x17
  18. CJ++ robo_reset
  19. et0: Broadcom BCM47XX 10/100/1000 Mbps Ethernet Controller 5.100.138.22
  20. CPU type 0x19749: 600MHz
  21. Tot mem: 131072 KBytes

  23. CFE mem:    0x82000000 - 0x82098970 (625008)
  24. Data:       0x8202E790 - 0x820319E0 (12880)
  25. BSS:        0x820319E0 - 0x82032970 (3984)
  26. Heap:       0x82032970 - 0x82096970 (409600)
  27. Stack:      0x82096970 - 0x82098970 (8192)
  28. Text:       0x82000000 - 0x8202E790 (190352)

  30. Committing NVRAM...done
  31. Waiting for reset button release...done
  32. Device eth0:  hwaddr C8-3A-35-5F-DB-B0, ipaddr 192.168.1.1, mask 255.255.255.0
  33.         gateway not set, nameserver not set
  34. Loader:raw Filesys:raw Dev:flash0.os File: Options:(null)
  35. Loading: CJ++ defined LZMA
  36. CJ++ using lzma
  37. .. 3109436 bytes read
  38. Entry at 0x80001000
  39. Closing network.
  40. Starting program at 0x80001000
  41. Linux version 2.6.22.19 (root@tomato) (gcc version 4.2.4) #6 Sat Sep 14 15:49:16                                                                                                  CST 2013
  42. CPU revision is: 00019749
  43. Found an ST compatible serial flash with 256 64KB blocks; total size 16MB
  44. Determined physical RAM map:
  45. memory: 07fff000 @ 00000000 (usable)
  46. memory: 08000000 @ 87fff000 (usable)
  47. Zone PFN ranges:
  48.   Normal          0 ->   131072
  49.   HighMem    131072 ->   589823
  50. early_node_map[2] active PFN ranges
  51.     0:        0 ->    32767
  52.     0:   557055 ->   589823
  53. Built 1 zonelists.  Total pages: 65535
  54. Kernel command line: root=/dev/mtdblock2 noinitrd console=ttyS0,115200
  55. Primary instruction cache 32kB, physically tagged, 4-way, linesize 32 bytes.
  56. Primary data cache 32kB, 4-way, linesize 32 bytes.
  57. Synthesized TLB refill handler (20 instructions).
  58. Synthesized TLB load handler fastpath (32 instructions).
  59. Synthesized TLB store handler fastpath (32 instructions).
  60. Synthesized TLB modify handler fastpath (31 instructions).
  61. PID hash table entries: 512 (order: 9, 2048 bytes)
  62. CPU: BCM5300 rev 1 pkg 0 at 600 MHz
  63. Using 300.000 MHz high precision timer.
  64. console [ttyS0] enabled
  65. Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
  66. Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
  67. Memory: 255400k/131068k available (2450k kernel code, 6460k reserved, 390k data,                                                                                                  196k init, 131072k highmem)
  68. Mount-cache hash table entries: 512
  69. NET: Registered protocol family 16
  70. usbcore: registered new interface driver usbfs
  71. usbcore: registered new interface driver hub
  72. usbcore: registered new device driver usb
  73. PCI: Disabled
  74. PCI: Disabled
  75. PCI: Fixing up bus 0
  76. NET: Registered protocol family 2
  77. Time: MIPS clocksource has been installed.
  78. IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
  79. TCP established hash table entries: 4096 (order: 3, 32768 bytes)
  80. TCP bind hash table entries: 4096 (order: 2, 16384 bytes)
  81. TCP: Hash tables configured (established 4096 bind 4096)
  82. TCP reno registered
  83. highmem bounce pool size: 64 pages
  84. squashfs: version 3.2-r2 (2007/01/15) Phillip Lougher
  85. io scheduler noop registered (default)
  86. HDLC line discipline: version $Revision: 4.8 $, maxframe=4096
  87. N_HDLC line discipline registered.
  88. Serial: 8250/16550 driver $Revision: 1.90 $ 2 ports, IRQ sharing disabled
  89. serial8250: ttyS0 at MMIO 0xb8000300 (irq = 8) is a 16550A
  90. serial8250: ttyS1 at MMIO 0xb8000400 (irq = 8) is a 16550A
  91. PPP generic driver version 2.4.2
  92. MPPE/MPPC encryption/compression module registered
  93. NET: Registered protocol family 24
  94. PPPoL2TP kernel driver, V0.18.3
  95. PPTP driver version 0.8.5
  96. pflash: found no supported devices
  97. Creating 5 MTD partitions on "sflash":
  98. 0x00000000-0x00020000 : "pmon"
  99. 0x00020000-0x00ff0000 : "linux"
  100. 0x00131208-0x00fb0000 : "rootfs"
  101. 0x00ff0000-0x01000000 : "nvram"
  102. 0x00fb0000-0x00ff0000 : "jffs2"
  103. dev_nvram_init: _nvram_init
  104. _nvram_init: allocat header: 2280980480, size= 65536
  105. usbcore: registered new interface driver hiddev
  106. usbcore: registered new interface driver usbhid
  107. drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
  108. u32 classifier
  109.     OLD policer on
  110. Netfilter messages via NETLINK v0.30.
  111. nf_conntrack version 0.5.0 (2048 buckets, 16384 max)
  112. ip_tables: (C) 2000-2006 Netfilter Core Team
  113. ipt_account 0.1.21 : Piotr Gasidlo <quaker@barbara.eu.org>, http://www.barbara.e                                                                                                 u.org/~quaker/ipt_account/
  114. net/ipv4/netfilter/tomato_ct.c [Sep 14 2013 15:06:01]
  115. NET: Registered protocol family 1
  116. NET: Registered protocol family 10
  117. ip6_tables: (C) 2000-2006 Netfilter Core Team
  118. NET: Registered protocol family 17
  119. 802.1Q VLAN Support v1.8 Ben Greear <greearb@candelatech.com>
  120. All bugs added by David S. Miller <davem@redhat.com>
  121. VFS: Mounted root (squashfs filesystem) readonly.
  122. Freeing unused kernel memory: 196k freed
  123. Warning: unable to open an initial console.
  124. emf: module license 'Proprietary' taints kernel.
  125. et_module_init: passivemode set to 0x0
  126. et_module_init: et_txq_thresh set to 0x0
  127. bcm_robo_enable_switch: EEE is enabled
  128. eth0: Broadcom BCM47XX 10/100/1000 Mbps Ethernet Controller 6.30.39.31 (r341183)
  129. / # eth1: No such device
  130. eth2: No such device
  131. lo: File exists
复制代码
我的恩山、我的无线 The best wifi forum is right here.
回复

使用道具 举报

bwq***
 楼主| | 显示全部楼层
nicholaswu 发表于 2013-9-15 08:25
正常的tomato输出：914的ttl输出（启动失败）：

PCI网卡没有启动。
我的恩山、我的无线 The best wifi forum is right here.
回复

使用道具 举报

hunt***
| 显示全部楼层
固件又更新了。支持EA6500否？
我的恩山、我的无线 The best wifi forum is right here.
回复

使用道具 举报

星***
| 显示全部楼层
大神 W1800R现在不单独分出来了吗？
我的恩山、我的无线 The best wifi forum is right here.
回复

使用道具 举报

12345678下一页
返回列表 发新帖
高级模式
B Color Image Link Quote Code Smilies
您需要登录后才可以回帖 登录 | 立即注册

本版积分规则

关闭

欢迎大家光临恩山无线论坛上一条 /1 下一条

有疑问请添加管理员QQ86788181|手机版|小黑屋|Archiver|恩山无线论坛(常州市恩山计算机开发有限公司版权所有) ( 苏ICP备05084872号 )

GMT+8, 2024-4-29 18:04

Powered by Discuz! X3.5

© 2001-2024 Discuz! Team.

| 江苏省互联网有害信息举报中心 举报信箱：js12377 | @jischina.com.cn 举报电话：025-88802724 本站不良内容举报信箱：68610888@qq.com 举报电话：0519-86695797

快速回复 返回顶部 返回列表