找回密码
 立即注册

QQ登录

只需一步,快速开始

搜索
广告投放联系QQ68610888
查看: 5905|回复: 7

[openwrt(x86)] openwrt X86 增加内存后设备不停重启!!!

[复制链接]
发表于 2015-5-19 17:59 | 显示全部楼层 |阅读模式
原来的设备是工控板 1G内存 升级2G后设备不停重启!
下面是开机时启动内容!

帮忙看看!
详细的见附件!
[    0.000000] Linux version 3.10.28 (v@v) (gcc version 4.6.4 (OpenWrt/Linaro GCC 4.6-2013.05 unknown) ) #1 Thu Feb 6 02:56:06 CST 2014
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000007f59ffff] usable
[    0.000000] BIOS-e820: [mem 0x000000007f5a0000-0x000000007f5adfff] ACPI data
[    0.000000] BIOS-e820: [mem 0x000000007f5ae000-0x000000007f5cffff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x000000007f5d0000-0x000000007f5dffff] reserved
[    0.000000] BIOS-e820: [mem 0x000000007f5e8000-0x000000007fffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ffb00000-0x00000000ffffffff] reserved
[    0.000000] Notice: NX (Execute Disable) protection cannot be enabled: non-PAE kernel!
[    0.000000] SMBIOS 2.6 present.
[    0.000000] e820: last_pfn = 0x7f5a0 max_arch_pfn = 0x100000
[    0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[    0.000000] found SMP MP-table at [mem 0x000ff780-0x000ff78f] mapped at [c00ff780]
[    0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[    0.000000] init_memory_mapping: [mem 0x37000000-0x373fffff]
[    0.000000] init_memory_mapping: [mem 0x30000000-0x36ffffff]
[    0.000000] init_memory_mapping: [mem 0x00100000-0x2fffffff]
[    0.000000] init_memory_mapping: [mem 0x37400000-0x377fdfff]
[    0.000000] ACPI: RSDP 000f9f70 00014 (v00 ACPIAM)
[    0.000000] ACPI: RSDT 7f5a0000 00044 (v01 022214 RSDT0912 20140222 MSFT 00000097)
[    0.000000] ACPI: FACP 7f5a0200 00084 (v01 022214 FACP0912 20140222 MSFT 00000097)
[    0.000000] ACPI: DSDT 7f5a0440 063E2 (v01 WASLAN WASLAN07 00000007 INTL 20051117)
[    0.000000] ACPI: FACS 7f5ae000 00040
[    0.000000] ACPI: APIC 7f5a0390 0006C (v01 022214 APIC0912 20140222 MSFT 00000097)
[    0.000000] ACPI: MCFG 7f5a0400 0003C (v01 022214 OEMMCFG  20140222 MSFT 00000097)
[    0.000000] ACPI: OEMB 7f5ae040 00082 (v01 022214 OEMB0912 20140222 MSFT 00000097)
[    0.000000] ACPI: HPET 7f5aa440 00038 (v01 022214 OEMHPET  20140222 MSFT 00000097)
[    0.000000] ACPI: ASF! 7f5aa480 00099 (v32 LEGEND I865PASF 00000001 INTL 20051117)
[    0.000000] ACPI: GSCI 7f5ae0d0 02024 (v01 022214 GMCHSCI  20140222 MSFT 00000097)
[    0.000000] ACPI: SSDT 7f5b0730 004F0 (v01  PmRef    CpuPm 00003000 INTL 20051117)
[    0.000000] 1149MB HIGHMEM available.
[    0.000000] 887MB LOWMEM available.
[    0.000000]   mapped low ram: 0 - 377fe000
[    0.000000]   low ram: 0 - 377fe000
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x00001000-0x00ffffff]
[    0.000000]   Normal   [mem 0x01000000-0x377fdfff]
[    0.000000]   HighMem  [mem 0x377fe000-0x7f59ffff]
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x00001000-0x0009efff]
[    0.000000]   node   0: [mem 0x00100000-0x7f59ffff]
[    0.000000] Using APIC driver default
[    0.000000] ACPI: PM-Timer IO Port: 0x808
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
[    0.000000] ACPI: NR_CPUS/possible_cpus limit of 1 reached.  Processor 1/0x2 ignored.
[    0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x01] enabled)
[    0.000000] ACPI: NR_CPUS/possible_cpus limit of 1 reached.  Processor 2/0x1 ignored.
[    0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
[    0.000000] ACPI: NR_CPUS/possible_cpus limit of 1 reached.  Processor 3/0x3 ignored.
[    0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 4, version 32, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0xffffffff base: 0xfed00000
[    0.000000] e820: [mem 0x80000000-0xfedfffff] available for PCI devices
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 519758
[    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz root=/dev/sda2 rootfstype=ext4 rootwait console=tty0 console=ttyS0,38400n8 noinitrd
[    0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[    0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[    0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.000000] Initializing CPU#0
[    0.000000] Initializing HighMem for node 0 (000377fe:0007f5a0)
[    0.000000] Memory: 2063308k/2086528k available (3578k kernel code, 22828k reserved, 1339k data, 344k init, 1177224k highmem)
[    0.000000] virtual kernel memory layout:
[    0.000000]     fixmap  : 0xfffa2000 - 0xfffff000   ( 372 kB)
[    0.000000]     pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
[    0.000000]     vmalloc : 0xf7ffe000 - 0xff7fe000   ( 120 MB)
[    0.000000]     lowmem  : 0xc0000000 - 0xf77fe000   ( 887 MB)
[    0.000000]       .init : 0xc14ce000 - 0xc1524000   ( 344 kB)
[    0.000000]       .data : 0xc137e981 - 0xc14cd640   (1339 kB)
[    0.000000]       .text : 0xc1000000 - 0xc137e981   (3578 kB)
[    0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[    0.000000] NR_IRQS:2304 nr_irqs:256 16
[    0.000000] Console: colour VGA+ 80x25
[    0.000000] console [tty0] enabled
[    0.000000] console [ttyS0] enabled
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.000000] tsc: Detected 1795.647 MHz processor
[    0.020002] Calibrating delay loop (skipped), value calculated using timer frequency.. 3591.29 BogoMIPS (lpj=17956470)
[    0.040005] pid_max: default: 32768 minimum: 301
[    0.050061] Mount-cache hash table entries: 512
[    0.060227] mce: CPU supports 5 MCE banks
[    0.070015] CPU0: Thermal monitoring enabled (TM1)
[    0.080018] Last level iTLB entries: 4KB 32, 2MB 0, 4MB 0
[    0.080018] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 8
[    0.080018] tlb_flushall_shift: 6
[    0.090004] CPU: Intel(R) Atom(TM) CPU D525   @ 1.80GHz (fam: 06, model: 1c, stepping: 0a)
[    0.120059] ACPI: Core revision 20130328
[    0.140057] ACPI: All ACPI Tables successfully acquired
[    0.160101] Performance Events: PEBS fmt0+, 8-deep LBR, Atom events, Intel PMU driver.
[    0.190012] ... version:                3
[    0.200004] ... bit width:              40
[    0.210004] ... generic registers:      2
[    0.220004] ... value mask:             000000ffffffffff
[    0.230004] ... max period:             000000007fffffff
[    0.240003] ... fixed-purpose events:   3
[    0.250004] ... event mask:             0000000700000003
[    0.260141] Enabling APIC mode:  Flat.  Using 1 I/O APICs
[    0.270378] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.390000] NET: Registered protocol family 16
[    0.390782] ACPI: bus type PCI registered
[    0.400022] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[    0.410005] PCI: not using MMCONFIG
[    0.420205] PCI: PCI BIOS revision 3.00 entry at 0xf0031, last bus=7
[    0.430002] PCI: Using configuration type 1 for base access
[    0.447026] bio: create slab <bio-0> at 0
[    0.450198] ACPI: Added _OSI(Module Device)
[    0.460005] ACPI: Added _OSI(Processor Device)
[    0.470004] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.480016] ACPI: Added _OSI(Processor Aggregator Device)
[    0.501309] ACPI: Executed 1 blocks of module-level executable AML code
[    0.515346] ACPI: SSDT 7f5b0190 00594 (v01  PmRef  Cpu0Cst 00003001 INTL 20051117)
[    0.530978] ACPI: Dynamic OEM Table Load:
[    0.550627] ACPI: SSDT   (null) 00594 (v01  PmRef  Cpu0Cst 00003001 INTL 20051117)
[    0.561726] ACPI: Interpreter enabled
[    0.570013] ACPI: (supports S0 S5)
[    0.580003] ACPI: Using IOAPIC for interrupt routing
[    0.590053] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[    0.613814] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
[    0.620003] PCI: Using MMCONFIG for extended config space
[    0.630113] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.663651] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.671082] PCI host bridge to bus 0000:00
[    0.680008] pci_bus 0000:00: root bus resource [bus 00-ff]
[    0.690006] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7]
[    0.700005] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff]
[    0.710005] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[    0.720005] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000dffff]
[    0.730005] pci_bus 0000:00: root bus resource [mem 0x7f700000-0xdfffffff]
[    0.740005] pci_bus 0000:00: root bus resource [mem 0xf0000000-0xfed8ffff]
[    0.754452] pci 0000:00:1f.0: quirk: [io  0x0800-0x087f] claimed by ICH6 ACPI/GPIO/TCO
[    0.760010] pci 0000:00:1f.0: quirk: [io  0x0500-0x053f] claimed by ICH6 GPIO
[    0.770007] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0a00 (mask 000f)
[    0.781495] pci 0000:00:1c.0: PCI bridge to [bus 02]
[    0.790582] pci 0000:00:1c.1: PCI bridge to [bus 03]
[    0.800506] pci 0000:00:1c.2: PCI bridge to [bus 04]
[    0.810499] pci 0000:00:1c.3: PCI bridge to [bus 05]
[    0.820501] pci 0000:00:1c.4: PCI bridge to [bus 06]
[    0.830498] pci 0000:00:1c.5: PCI bridge to [bus 07]
[    0.840150] pci 0000:00:1e.0: PCI bridge to [bus 01] (subtractive decode)
[    0.850365] acpi PNP0A08:00: Unable to request _OSC control (_OSC support mask: 0x19)
[    0.861579] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 *7 10 11 12 14 15)
[    0.886240] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[    0.898615] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 *6 10 11 12 14 15)
[    0.910125] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 *11 12 14 15)
[    0.931951] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[    0.953665] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 *15)
[    0.976272] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[    0.988616] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[    1.000887] ACPI: Enabled 2 GPEs in block 00 to 1F
[    1.010549] SCSI subsystem initialized
[    1.020182] ACPI: bus type USB registered
[    1.040004] usbcore: registered new interface driver usbfs
[    1.050063] usbcore: registered new interface driver hub
[    1.060072] usbcore: registered new device driver usb
[    1.070253] PCI: Using ACPI for IRQ routing
[    1.080101] Expanded resource reserved due to conflict with PCI Bus 0000:00
[    1.090370] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[    1.100007] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[    1.112936] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
[    1.122046] Switching to clocksource hpet
[    1.130108] pnp: PnP ACPI init
[    1.139335] ACPI: bus type PNP registered
[    1.151649] system 00:00: [mem 0xfed14000-0xfed19fff] has been reserved
[    1.171538] system 00:00: [mem 0xfed90000-0xfed93fff] has been reserved
[    1.194675] system 00:07: [io  0x04d0-0x04d1] has been reserved
[    1.212492] system 00:07: [io  0x0800-0x087f] has been reserved
[    1.230293] system 00:07: [io  0x0500-0x053f] has been reserved
[    1.248103] system 00:07: [mem 0xfed1c000-0xfed1ffff] has been reserved
[    1.267994] system 00:07: [mem 0xfed20000-0xfed3ffff] has been reserved
[    1.287884] system 00:07: [mem 0xfed40000-0xfed8ffff] has been reserved
[    1.308380] system 00:0a: [mem 0xffc00000-0xffefffff] has been reserved
[    1.328571] system 00:0b: [mem 0xfec00000-0xfec00fff] could not be reserved
[    1.349508] system 00:0b: [mem 0xfee00000-0xfee00fff] has been reserved
[    1.369899] system 00:0c: [io  0x0a00-0x0a0f] has been reserved
[    1.387725] system 00:0c: [io  0x0a10-0x0a1f] has been reserved
[    1.405561] system 00:0c: [io  0x0a20-0x0a2f] has been reserved
[    1.423367] system 00:0c: [io  0x0a30-0x0a3f] has been reserved
[    1.441476] system 00:0d: [mem 0xe0000000-0xefffffff] has been reserved
[    1.461874] system 00:0e: [mem 0x00000000-0x0009ffff] could not be reserved
[    1.482812] system 00:0e: [mem 0x000c0000-0x000cffff] could not be reserved
[    1.503737] system 00:0e: [mem 0x000e0000-0x000fffff] could not be reserved
[    1.524666] system 00:0e: [mem 0x00100000-0x7f6fffff] could not be reserved
[    1.545597] system 00:0e: [mem 0xfed90000-0xffffffff] could not be reserved
[    1.566823] pnp: PnP ACPI: found 15 devices
[    1.579440] ACPI: bus type PNP unregistered
[    1.631526] pci 0000:00:1c.0: BAR 9: assigned [mem 0x80000000-0x801fffff 64bit pref]
[    1.654864] pci 0000:00:1c.1: BAR 9: assigned [mem 0x80200000-0x803fffff 64bit pref]
[    1.678183] pci 0000:00:1c.2: BAR 9: assigned [mem 0x80400000-0x805fffff 64bit pref]
[    1.701505] pci 0000:00:1c.3: BAR 9: assigned [mem 0x80600000-0x807fffff 64bit pref]
[    1.724829] pci 0000:00:1c.4: BAR 9: assigned [mem 0x80800000-0x809fffff 64bit pref]
[    1.748148] pci 0000:00:1c.5: BAR 9: assigned [mem 0x80a00000-0x80bfffff 64bit pref]
[    1.771473] pci 0000:00:1c.0: PCI bridge to [bus 02]
[    1.786431] pci 0000:00:1c.0:   bridge window [io  0x9000-0x9fff]
[    1.804763] pci 0000:00:1c.0:   bridge window [mem 0xfe600000-0xfe6fffff]
[    1.825176] pci 0000:00:1c.0:   bridge window [mem 0x80000000-0x801fffff 64bit pref]
[    1.848485] pci 0000:00:1c.1: PCI bridge to [bus 03]
[    1.863440] pci 0000:00:1c.1:   bridge window [io  0xa000-0xafff]
[    1.881774] pci 0000:00:1c.1:   bridge window [mem 0xfe700000-0xfe7fffff]
[    1.902187] pci 0000:00:1c.1:   bridge window [mem 0x80200000-0x803fffff 64bit pref]
[    1.925524] pci 0000:00:1c.2: PCI bridge to [bus 04]
[    1.940481] pci 0000:00:1c.2:   bridge window [io  0xb000-0xbfff]
[    1.958814] pci 0000:00:1c.2:   bridge window [mem 0xfe800000-0xfe8fffff]
[    1.979225] pci 0000:00:1c.2:   bridge window [mem 0x80400000-0x805fffff 64bit pref]
[    2.002534] pci 0000:00:1c.3: PCI bridge to [bus 05]
[    2.017491] pci 0000:00:1c.3:   bridge window [io  0xc000-0xcfff]
[    2.035827] pci 0000:00:1c.3:   bridge window [mem 0xfe900000-0xfe9fffff]
[    2.056237] pci 0000:00:1c.3:   bridge window [mem 0x80600000-0x807fffff 64bit pref]
[    2.079547] pci 0000:00:1c.4: PCI bridge to [bus 06]
[    2.094502] pci 0000:00:1c.4:   bridge window [io  0xd000-0xdfff]
[    2.112838] pci 0000:00:1c.4:   bridge window [mem 0xfea00000-0xfeafffff]
[    2.133249] pci 0000:00:1c.4:   bridge window [mem 0x80800000-0x809fffff 64bit pref]
[    2.156557] pci 0000:00:1c.5: PCI bridge to [bus 07]
[    2.171543] pci 0000:00:1c.5:   bridge window [io  0xe000-0xefff]
[    2.189877] pci 0000:00:1c.5:   bridge window [mem 0xfeb00000-0xfebfffff]
[    2.210287] pci 0000:00:1c.5:   bridge window [mem 0x80a00000-0x80bfffff 64bit pref]
[    2.233597] pci 0000:00:1e.0: PCI bridge to [bus 01]
[    2.249337] NET: Registered protocol family 2
[    2.262666] TCP established hash table entries: 8192 (order: 4, 65536 bytes)
[    2.283921] TCP bind hash table entries: 8192 (order: 3, 32768 bytes)
[    2.303311] TCP: Hash tables configured (established 8192 bind 8192)
[    2.322448] TCP: reno registered
[    2.332191] UDP hash table entries: 512 (order: 1, 8192 bytes)
[    2.349753] UDP-Lite hash table entries: 512 (order: 1, 8192 bytes)
[    2.368669] NET: Registered protocol family 1
[    2.383479] NatSemi SCx200 Driver
[    2.394235] bounce pool size: 64 pages
[    2.411410] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    2.429059] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
[    2.458699] msgmni has been set to 1730
[    2.470337] io scheduler noop registered
[    2.482162] io scheduler deadline registered (default)
[    2.499083] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
[    2.523715] ACPI: Power Button [PWRB]
[    2.534872] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[    2.557140] ACPI: Power Button [PWRF]
[    2.568546] isapnp: Scanning for PnP cards...
[    2.937426] isapnp: No Plug & Play device found
[    2.951235] Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled
[    2.990924] 00:05: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[    3.028278] 00:06: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[    3.045850] Non-volatile memory driver v1.3
[    3.058481] Linux agpgart interface v0.103
[    3.070876] agpgart-intel 0000:00:00.0: Intel GMA3150 Chipset
[    3.088244] agpgart-intel 0000:00:00.0: detected gtt size: 524288K total, 262144K mappable
[    3.113218] agpgart-intel 0000:00:00.0: detected 8192K stolen memory
[    3.132523] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000
[    3.153086] [drm] Initialized drm 1.1.0 20060810
[    3.167558] [drm] Memory usable by graphics device = 512M
[    3.184302] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[    3.204205] [drm] Driver supports precise vblank timestamp query.
[    3.231811] [drm] initialized overlay support
[    3.271633] fbcon: inteldrmfb (fb0) is primary device
[    3.380013] tsc: Refined TSC clocksource calibration: 1795.702 MHz
[    3.380019] Switching to clocksource tsc
[    4.067075] Console: switching to colour frame buffer device 128x48
[    4.140123] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[    4.158735] i915 0000:00:02.0: registered panic notifier
[    4.174746] i915: No ACPI video bus found
[    4.186935] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[    4.209701] scsi0 : ata_piix
[    4.218551] scsi1 : ata_piix
[    4.227355] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14
[    4.248323] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15
[    4.269416] ata_piix 0000:00:1f.2: MAP [
[    4.281241]  P0 P2 P1 P3 ]
[    4.440740] scsi2 : ata_piix
[    4.449559] scsi3 : ata_piix
[    4.458393] ata3: SATA max UDMA/133 cmd 0x8c00 ctl 0x8880 bmdma 0x8400 irq 18
[    4.479883] ata4: SATA max UDMA/133 cmd 0x8800 ctl 0x8480 bmdma 0x8408 irq 18
[    4.502203] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    4.521865] ehci-pci: EHCI PCI platform driver
[    4.535407] ehci-pci 0000:00:1a.7: EHCI Host Controller
[    4.551152] ehci-pci 0000:00:1a.7: new USB bus registered, assigned bus number 1
[    4.573442] ehci-pci 0000:00:1a.7: debug port 1
[    4.590992] ehci-pci 0000:00:1a.7: irq 18, io mem 0xfe5ff400
[    4.630012] ehci-pci 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[    4.650787] hub 1-0:1.0: USB hub found
[    4.665273] hub 1-0:1.0: 4 ports detected
[    4.680742] ehci-pci 0000:00:1d.7: EHCI Host Controller
[    4.699619] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 2
[    4.724993] ehci-pci 0000:00:1d.7: debug port 1
[    4.745641] ehci-pci 0000:00:1d.7: irq 23, io mem 0xfe5ff800
[    4.780012] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[    4.800669] hub 2-0:1.0: USB hub found
[    4.815067] hub 2-0:1.0: 6 ports detected
[    4.830351] ehci-platform: EHCI generic platform driver
[    4.849220] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    4.871037] uhci_hcd: USB Universal Host Controller Interface driver
[    4.893413] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[    4.912264] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
[    4.937678] uhci_hcd 0000:00:1a.0: irq 16, io base 0x00007480
[    4.958389] hub 3-0:1.0: USB hub found
[    4.972751] hub 3-0:1.0: 2 ports detected
[    4.988050] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[    5.006814] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
[    5.032117] uhci_hcd 0000:00:1a.1: irq 21, io base 0x00007400
[    5.052698] hub 4-0:1.0: USB hub found
[    5.066999] hub 4-0:1.0: 2 ports detected
[    5.082223] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[    5.100936] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5
[    5.126163] uhci_hcd 0000:00:1d.0: irq 23, io base 0x00007c00
[    5.146702] hub 5-0:1.0: USB hub found
[    5.160941] hub 5-0:1.0: 2 ports detected
[    5.176080] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[    5.194724] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6
[    5.219915] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00007880
[    5.240367] hub 6-0:1.0: USB hub found
[    5.254510] hub 6-0:1.0: 2 ports detected
[    5.269641] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[    5.288229] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7
[    5.313439] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00007800
[    5.333911] hub 7-0:1.0: USB hub found
[    5.348111] hub 7-0:1.0: 2 ports detected
[    5.363371] usbcore: registered new interface driver usb-storage
[    5.384675] i8042: PNP: No PS/2 controller found. Probing ports directly.
[    5.408489] serio: i8042 KBD port at 0x60,0x64 irq 1
[    5.426465] serio: i8042 AUX port at 0x60,0x64 irq 12
[    5.444881] mousedev: PS/2 mouse device common for all mice
[    5.464940] rtc_cmos 00:02: RTC can wake from S4
[    5.481983] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
[    5.503311] rtc_cmos 00:02: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[    5.529413] cpuidle: using governor ladder
[    5.544832] cpuidle: using governor menu
[    5.559858] TCP: cubic registered
[    5.572811] NET: Registered protocol family 17
[    5.589194] 8021q: 802.1Q VLAN Support v1.8
[    5.615551] ata3.00: SATA link down (SStatus 0 SControl 300)
[    5.635584] ata3.01: SATA link down (SStatus 0 SControl 300)
[    5.655969] Using IPI Shortcut mode
[    5.670244] rtc_cmos 00:02: setting system clock to 2015-05-19 06:09:23 UTC (1432015763)
[    6.180010] ata4.01: failed to resume link (SControl 0)
[    6.350061] ata4.00: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    6.372575] ata4.01: SATA link down (SStatus 0 SControl 0)
[    6.410130] ata4.00: ATA-8: DragonDiamond D2 4GB 1.14_SG0401
[    6.410130] , 1.14_SG0, max UDMA/133
[    6.444312] ata4.00: 7863408 sectors, multi 1: LBA
[    6.480129] ata4.00: configured for UDMA/133
[    6.496164] scsi 3:0:0:0: Direct-Access     ATA      DragonDiamond D2 1.14 PQ: 0 ANSI: 5
[    6.523974] sd 3:0:0:0: [sda] 7863408 512-byte logical blocks: (4.02 GB/3.74 GiB)
[    6.549859] sd 3:0:0:0: [sda] Write Protect is off
[    6.567494] sd 3:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    6.598682]  sda: sda1 sda2
[    6.610856] sd 3:0:0:0: [sda] Attached SCSI disk
[    6.629499] EXT4-fs (sda2): mounted filesystem without journal. Opts: (null)
[    6.653984] VFS: Mounted root (ext4 filesystem) readonly on device 8:2.
[    6.677235] Freeing unused kernel memory: 344k freed
procd: Console is alive
procd: - preinit -
Press the [f] ke[    6.781082] sh[629]: segfault at 49cedd34 ip 08065411 sp bfc69d3c error 4y and hit [enter in busybox[8048000+5d000]] to enter fails
afe mode
Press the [1], [2], [3] or [4] key and hit [enter] to select the debug level
procd: - early -
Failed to connect to ubus
[    6.910067] usbmode[761]: segfault at 486174d4 ip 08061523 sp bfd732a4 error 4 in busybox[8048000+5d000]
[    6.942859] usbmode[748]: segfault at 486174d8 ip 0805df57 sp bfd73090 error 4 in busybox[8048000+5d000]
[    7.124544] pps_core: LinuxPPS API ver. 1 registered
[    7.143055] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    7.175954] PTP clock support registered
[    7.206879] Button Hotplug driver version 0.4.1
[    7.230547] BUG: unable to handle kernel paging request at b62df8a0
[    7.240008] IP: [<c115292e>] strcmp+0xe/0x30
[    7.240008] *pde = 00000000
[    7.240008] Oops: 0000 [#1]
[    7.240008] Modules linked in: ide_core(+) gpio_button_hotplug button_hotplug tg3 hwmon b44 ssb ptp pps_core libphy
[    7.240008] CPU: 0 PID: 627 Comm: kmodloader Not tainted 3.10.28 #1
[    7.240008] Hardware name: To Be Filled By O.E.M. To Be Filled By O.E.M./To Be Filled By O.E.M., BIOS 080016  02/22/2014
[    7.240008] task: f6207320 ti: f6280000 task.ti: f6280000
[    7.240008] EIP: 0060:[<c115292e>] EFLAGS: 00010292 CPU: 0
[    7.240008] EIP is at strcmp+0xe/0x30
[    7.240008] EAX: b62df8a0 EBX: f8172d48 ECX: f825d88c EDX: f825e12c
[    7.240008] ESI: b62df8a0 EDI: f825e12c EBP: f825e12c ESP: f6281e8c
[    7.240008]  DS: 007b ES: 007b FS: 0000 GS: 0033 SS: 0068
[    7.240008] CR0: 8005003b CR2: b62df8a0 CR3: 3628b000 CR4: 000007d0
[    7.240008] DR0: 00000000 DR1: 00000000 DR2: 00000000 DR3: 00000000
[    7.240008] DR6: ffff0ff0 DR7: 00000400
[    7.240008] Stack:
[    7.240008]  f606c4c0 f825e12c c114c4ed f6281f60 00000001 00000000 c1057254 0000000a
[    7.240008]  ffff8000 00007fff c10548d0 00000000 f825e120 00000003 f825e240 00000000
[    7.240008]  0000000a f825d88c f824c500 00000fa6 f6281f68 f825e12c 0804a0af f6207320
[    7.240008] Call Trace:
[    7.240008]  [<c114c4ed>] ? kset_find_obj+0x1d/0x60
[    7.240008]  [<c1057254>] ? load_module+0x1274/0x1b70
[    7.240008]  [<c10548d0>] ? sys_getegid16+0x50/0x50
[    7.240008]  [<c1057bf4>] ? SyS_init_module+0xa4/0xb0
[    7.240008]  [<c137d1f5>] ? syscall_call+0x7/0xb
[    7.240008]  [<c1370000>] ? store_group_addr+0xd0/0xe0
[    7.240008] Code: d8 8b 74 24 04 8b 1c 24 8b 7c 24 08 8b 6c 24 0c 83 c4 10 c3 89 f6 8d bc 27 00 00 00 00 83 ec 08 89 34 24 89 c6 89 7c 24 04 89 d7 <ac> ae 75 08 84 c0 75 f8 31 c0 eb 04 19 c0 0c 01 8b 34 24 8b 7c
[    7.240008] EIP: [<c115292e>] strcmp+0xe/0x30 SS:ESP 0068:f6281e8c
[    7.240008] CR2: 00000000b62df8a0
[    7.890367] ---[ end trace d3c195abbd7f34d5 ]---
[    7.908753] procd[1]: segfault at fe03feff ip b766a2da sp 08751276 error 5
                                                                             procd: - init - in libuClibc-0.9.33.2.so[b7654000+88000]

procd: Rebooting[    7.970918] sd 3:0:0:0: [sda] Synchronizing SCSI cache
as procd has crashed
procd: re[    7.997053] Restarting system.
boot
[    8.013846] reboot: machine restart

本帖子中包含更多资源

您需要 登录 才可以下载或查看,没有账号?立即注册

×
发表于 2015-5-19 18:52 | 显示全部楼层
本帖最后由 djjk 于 2016-6-26 11:49 编辑

!!!
回复 支持 反对

使用道具 举报

发表于 2015-5-19 20:01 | 显示全部楼层
x86我还是喜欢zeroshell
回复 支持 反对

使用道具 举报

发表于 2015-5-19 21:59 | 显示全部楼层
应该是内存不兼容。open用1G的内存够了。

点评

内存原来就是2G的,只是最近发现设备重启。测试时换上1G发现有问题了!  详情 回复 发表于 2015-5-20 08:58
回复 支持 反对

使用道具 举报

 楼主| 发表于 2015-5-20 08:58 | 显示全部楼层
hyt0000 发表于 2015-5-19 21:59
应该是内存不兼容。open用1G的内存够了。

内存原来就是2G的,只是最近发现设备重启。测试时换上1G发现有问题了!

点评

估计内存出问题了,换一条试试呢。  详情 回复 发表于 2015-5-21 00:41
回复 支持 反对

使用道具 举报

发表于 2015-5-20 09:27 | 显示全部楼层
进 memtest  检测内存
回复 支持 反对

使用道具 举报

发表于 2015-5-21 00:41 来自手机 | 显示全部楼层
dpyouling 发表于 2015-5-20 08:58
内存原来就是2G的,只是最近发现设备重启。测试时换上1G发现有问题了!

估计内存出问题了,换一条试试呢。

点评

很感谢!确实是内存的问题!  详情 回复 发表于 2015-7-3 09:44
回复 支持 反对

使用道具 举报

 楼主| 发表于 2015-7-3 09:44 | 显示全部楼层
hyt0000 发表于 2015-5-21 00:41
估计内存出问题了,换一条试试呢。

很感谢!确实是内存的问题!
回复 支持 反对

使用道具 举报

您需要登录后才可以回帖 登录 | 立即注册

本版积分规则

关闭

欢迎大家光临恩山无线论坛上一条 /1 下一条

有疑问请添加管理员QQ86788181|手机版|小黑屋|Archiver|恩山无线论坛(常州市恩山计算机开发有限公司版权所有) ( 苏ICP备05084872号 )

GMT+8, 2024-6-21 04:23

Powered by Discuz! X3.5

© 2001-2024 Discuz! Team.

| 江苏省互联网有害信息举报中心 举报信箱:js12377 | @jischina.com.cn 举报电话:025-88802724 本站不良内容举报信箱:68610888@qq.com

快速回复 返回顶部 返回列表