新手841V8刷wr800NV1出问题了,求助!

乐***

手上有一个841V8 拆机看闪存是QH16-104
以下是TTL中的信息:
U-Boot 1.1.4 (Jan 22 2013 - 00:11:52)
U-boot AP123
DRAM:  16 MB
Top of RAM usable for U-Boot at: 81000000
Reserving 139k for U-Boot at: 80fdc000
Reserving 192k for malloc() at: 80fac000
Reserving 44 Bytes for Board Info at: 80fabfd4
Reserving 36 Bytes for Global Data at: 80fabfb0
Reserving 128k for boot params() at: 80f8bfb0
Stack Pointer at: 80f8bf98
Now running in RAM - U-Boot at: 80fdc000
Flash Manuf Id 0x1c, DeviceId0 0x70, DeviceId1 0x15
flash size 4MB, sector count = 64
Flash:  4 MB
Using default environment


In:    serial
Out:   serial
Err:   serial
Net:   ag934x_enet_initialize...
wasp  reset mask:c03300
WASP ----> S27 PHY
: cfg1 0x80000000 cfg2 0x7114
eth0: ec:88:8f:30:8a:45
s27 reg init
athrs27_phy_setup ATHR_PHY_CONTROL 4 :1000
athrs27_phy_setup ATHR_PHY_SPEC_STAUS 4 :10
eth0 up
WASP ----> S27 PHY
: cfg1 0xf cfg2 0x7214
eth1: ec:88:8f:30:8a:44
s27 reg init lan
ATHRS27: resetting s27
ATHRS27: s27 reset done
athrs27_phy_setup ATHR_PHY_CONTROL 0 :1000
athrs27_phy_setup ATHR_PHY_SPEC_STAUS 0 :10
athrs27_phy_setup ATHR_PHY_CONTROL 1 :1000
athrs27_phy_setup ATHR_PHY_SPEC_STAUS 1 :10
athrs27_phy_setup ATHR_PHY_CONTROL 2 :1000
athrs27_phy_setup ATHR_PHY_SPEC_STAUS 2 :10
athrs27_phy_setup ATHR_PHY_CONTROL 3 :1000
athrs27_phy_setup ATHR_PHY_SPEC_STAUS 3 :10
eth1 up
eth0, eth1
Load Default Boot Params.
Autobooting in 1 seconds
ar7240>


参考:
http://m.blog.chinaunix.net/uid-375398-id-233648.html
https://www.right.com.cn/forum/thread-104977-1-1.html
http://forum.anywlan.com/forum.php?mod=viewthread&tid=191575&fromuid=561851
没有成功..
在
erase 0x9f000000 +0x20000 过址中,显示在址错误..试了很多都没弄好,,希望会的朋友帮下忙,.多谢了

乐***

erase 后面要什么写2M闪存的命令..按上面的教程,都没成功过,.