|
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
\ ____ _ __ __ /
\ / __ \____ ___ ____| | / /____/ /_ /
\ / / / / __ \/ _ \/ __ \ | /| / / ___/ __/ /
\ / /_/ / /_/ / __/ / / / |/ |/ / / / /_ /
\ \____/ .___/\___/_/ /_/|__/|__/_/ \__/ /
\ /_/ W I R E L E S S F R E E D O M /
\ /
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Base on OpenWrt R22.11.11 by lean & lienol
Kernel 5.15.77-flippy-78+o
Packaged by 活雷锋 on 2022-11-09
PLATFORM: amlogic SOC: s905d BOARD: n1
设备信息: Phicomm N1
CPU 型号: AArch64 : Cortex-A53 x 4
系统负载: 0.18 0.28 0.19 运行时间: 14分钟 29秒
环境温度: 31.0 °C 当前频率: 667 Mhz
内存已用: 8% of 1810MB IP 地址: 10.0.0.22
启动存储: 57% of 157.5M 系统存储: 41% of 736.0M
root@OpenWrt:~# cd /root
root@OpenWrt:~# ./install-to-emmc.sh
AUTO_MAINLINE_UBOOT:
SPECIFY_SOC:
SPECIFY_DTB:
SHARED_FSTYPE:
Current device: Phicomm N1 [ amlogic ]
/dev/mmcblk2
mmcblk2 : 7818182656 bytes
ROOTFS: sda2
BOOT: sda1
Please select s9xxx box model:
----------------------------------------------------------------------------------------------------
Amlogic GXL Family >>>
11. Phicomm N1 s905d 4C@1512Mhz,2GB Mem,1Gb Nic,brcm43455 wifi
12. Phicomm N1 (DMA thresh) s905d Same as above, when ethmac flow control is off
13. hg680p s905x 4C@1512Mhz,1Gb Nic
14. X96-Mini & TX3-Mini s905w 4C@1512Mhz,100M Nic
15. b860h s905x 4C@1512Mhz,1Gb Nic
16. MECOOL KI Pro s905d 2G/16G,1Gb Nic
17. TBee s905x 4C@1512Mhz,100M Nic
Amlogic GXM Family >>>
21. Octopus Planet s912 4C@1512Mhz+4C@1000Mhz,2GB Mem,1Gb Nic
22. *FAKE* Octopus Planet *FAKE* s912 4C@1512Mhz+4C@1000Mhz,2GB Mem,1Gb Nic
23. Tanix TX9 Pro s912 4C@1512Mhz+4C@1000Mhz,2GB Mem,1Gb Nic,brcm43455 wifi
24. H96 Pro Plus s912 2G/32G,1Gb Nic
25. Tanix TX92 s912 3GB DDR4 32GB eMMC,1.5GHz,5G WIFI,1Gb Nic
26. VORKE Z6 Plus s912 3GB DDR3 32GB eMMC5.0,1.5Ghz,TF CARD Support 1~32GB,1Gb Nic
27. MECOOL M8S Pro L s912 2G RAM,3G RAM,16G ROM,32G ROM,100M Nic
28. Vontar X92 s912 3GB RAM,16GB/32GB eMMC,2.4G/5.0G WiFi,AP6255 WLAN/Bluetooth 4.0,1Gb Nic
29. TX9 Pro s912 4C@1512Mhz+4C@1000Mhz,3G RAM,32G ROM,Bluetooth 4.1,1Gb Nic,brcm43455 wifi
2a. Nexbox A1 & A95X s912 2G DDR3 RAM 16G eMMC,1Gb Nic,qca9377 wifi(no work)
2b. Nexbox A95X A2 s912 2GB RAM,16GB ROM,2.4G/5.0G WiFi,qca9377 WLAN/Bluetooth 4.0,1Gb Nic
2c. Tanix TX8 MAX s912 3GB RAM,16GB/32GB eMMC,2.4G/5.0G WiFi,qca9377 WLAN/Bluetooth 4.1,1Gb Nic
Amlogic G12A Family >>>
31. X96 Max 4GB s905x2 4C@1908Mhz,4GB Mem,1Gb Nic
32. X96 Max 2GB s905x2 4C@1908Mhz,2GB Mem,100M Nic
33. CM311-1a-YST s905l3a 4C@1908Mhz,2+16G,Bluetooth rtl8761b,100Mb Nic
Amlogic G12B Family >>>
41. Beelink GT-King s922x 2C@1800Mhz(A53)+4C@1908Mhz(A73),4GB Mem,1Gb Nic,brcm4356 wifi
42. Beelink GT-King Pro s922x 2C@1800Mhz(A53)+4C@1908Mhz(A73),4GB Mem,1Gb Nic,brcm4356 wifi
43. Beelink GT-King Pro H s922x S922X-H,2C@1800Mhz(A53)+4C@2208Mhz(A73),4GB Mem,1Gb Nic,brcm4356 wifi
44. Beelink GT-King Pro Rev_A s922x 2C@1800Mhz(A53)+4C@1908Mhz(A73),4GB Mem,1Gb Nic,brcm4356 wifi
45. Hardkernel ODroid N2 s922x 2C@1800Mhz(A53)+4C@1908Mhz(A73),4GB Mem,1Gb Nic
46. UGOOS AM6 Plus s922x 2C@1800Mhz(A53)+4C@1908Mhz(A73),4GB Mem,1Gb Nic,brcm4398 wifi
47. Khadas VIM3 a311d 4C@2.2Ghz+2C@1.8Ghz,PCIe+USB 3.0,1Gb Nic,brcm4398 wifi
Amlogic SM1 Family >>>
51. X96 Max+ s905x3 4C@2100Mhz,4GB Mem,1Gb Nic,rtl8822cs wifi(no work)
52. X96 Max+ (OverClock) s905x3 4C@2208Mhz,4GB Mem,1Gb Nic,rtl8822cs wifi(no work)
53. HK1 Box s905x3 4C@2100Mhz,4GB Mem,1Gb Nic,brcm4339 wifi
54. HK1 Box (OverClock) s905x3 4C@2208Mhz,4GB Mem,1Gb Nic,brcm4339 wifi
55. H96 Max X3 s905x3 4C@2100Mhz,4GB Mem,1Gb Nic,brcm4339 wifi
56. H96 Max X3 (OverClock) s905x3 4C@2208Mhz,4GB Mem,1Gb Nic,brcm4339 wifi
57. Ugoos X3 s905x3 4C@2100Mhz,2(Cube)/4(Pro,Plus)GB Mem,1Gb Nic,brcm43455/43456 wifi
58. Ugoos X3 (OverClock) s905x3 4C@2208Mhz,2(Cube)/4(Pro,Plus)GB Mem,1Gb Nic,brcm43455/43456 wifi
59. TX3 BZ s905x3 4C@2100Mhz,4GB Mem,100Mb Nic,bcm4330 wifi
5a. TX3 BZ (OverClock) s905x3 4C@2208Mhz,4GB Mem,100Mb Nic,bcm4330 wifi
5b. TX3 QZ s905x3 4C@2100Mhz,4GB Mem,1Gb Nic,bcm4330 wifi
5c. TX3 QZ (OverClock) s905x3 4C@2208Mhz,4GB Mem,1Gb Nic,bcm4330 wifi
5d. X96 Max+ (IP1001M phy) s905x3 4C@2208Mhz,4GB Mem,1Gb Nic (IP1001M phy),brcm4354 wifi
5e. X96 Max+ Q2 & X96 Air Q1000 s905x3 4C@2208Mhz,4GB Mem,1Gb Nic,qca9377 wifi
5f. Tencent Aurora 3Pro s905x3 4C@2016Mhz,4GB Mem,32G Rom,JL2121 1Gb Nic,MT7661RSN
Other >>>
0. Other Enter the dtb file name of your box
----------------------------------------------------------------------------------------------------
Please choose: 11
FDT Value [ meson-gxl-s905d-phicomm-n1.dtb ]
K510 [ 0 ]
Backup bootloader -> [ BackupOldBootloader.img ] ...
4+0 records in
4+0 records out
Backup bootloader complete.
A total of [ 0 ] old partitions on EMMC will be deleted
Welcome to fdisk (util-linux 2.38).
Changes will remain in memory only, until you decide to write them.
Be careful before using the write command.
Device does not contain a recognized partition table.
Created a new DOS disklabel with disk identifier 0xf79466ef.
Command (m for help): Partition type
p primary (0 primary, 0 extended, 4 free)
e extended (container for logical partitions)
Select (default p): Partition number (1-4, default 1): First sector (2048-15269887, default 2048): Last sector, +/-sectors or +/-size{K,M,G,T,P} (139264-15269887, default 15269887):
Created a new partition 1 of type 'Linux' and of size 512 MiB.
Command (m for help): Partition type
p primary (1 primary, 0 extended, 3 free)
e extended (container for logical partitions)
Select (default p): Partition number (2-4, default 2): First sector (2048-15269887, default 2048): Last sector, +/-sectors or +/-size{K,M,G,T,P} (1638400-15269887, default 15269887):
Created a new partition 2 of type 'Linux' and of size 960 MiB.
Command (m for help): Partition type
p primary (2 primary, 0 extended, 2 free)
e extended (container for logical partitions)
Select (default p): Partition number (3,4, default 3): First sector (2048-15269887, default 2048): Last sector, +/-sectors or +/-size{K,M,G,T,P} (3604480-15269887, default 15269887):
Created a new partition 3 of type 'Linux' and of size 960 MiB.
Command (m for help): Partition type
p primary (3 primary, 0 extended, 1 free)
e extended (container for logical partitions)
Select (default e):
Selected partition 4
First sector (2048-15269887, default 2048): Last sector, +/-sectors or +/-size{K,M,G,T,P} (5570560-15269887, default 15269887):
Created a new partition 4 of type 'Linux' and of size 4.6 GiB.
Command (m for help): Partition number (1-4, default 4): Hex code or alias (type L to list all):
Changed type of partition 'Linux' to 'W95 FAT32 (LBA)'.
Command (m for help): Partition number (1-4, default 4): Hex code or alias (type L to list all):
Changed type of partition 'Linux' to 'Linux'.
Command (m for help): Partition number (1-4, default 4): Hex code or alias (type L to list all):
Changed type of partition 'Linux' to 'Linux'.
Command (m for help): Partition number (1-4, default 4): Hex code or alias (type L to list all):
Changed type of partition 'Linux' to 'Linux'.
Command (m for help): The partition table has been altered.
Calling ioctl() to re-read partition table.
Syncing disks.
Partition complete.
1+0 records in
1+0 records out
1+0 records in
1+0 records out
1+0 records in
1+0 records out
1+0 records in
1+0 records out
Write Android bootloader: [ /lib/u-boot/u-boot-2015-phicomm-n1.bin ]
444+0 records in
444+0 records out
8191+0 records in
8191+0 records out
Start creating file system ...
Create a boot file system ...
format boot partiton...
mkfs.fat 4.2 (2021-01-31)
Cannot initialize conversion from codepage 850 to UTF-8: No error information
Cannot initialize conversion from UTF-8 to codepage 850: No error information
Using internal CP850 conversion table
format rootfs1 partiton...
./install-to-emmc.sh: line 478: /usr/bin/uuidgen: No such file or directory
btrfs-progs v5.16.1
See http://btrfs.wiki.kernel.org for more information.
ERROR: could not parse UUID: -L
format rootfs2 partiton...
./install-to-emmc.sh: line 485: /usr/bin/uuidgen: No such file or directory
btrfs-progs v5.16.1
See http://btrfs.wiki.kernel.org for more information.
ERROR: could not parse UUID: -L
Wait for the boot file system to mount ...
Successfully mounted.
copy boot ...
Edit uEnv.txt ...
complete.
complete.
Wait for the rootfs file system to mount ...
Not mounted successfully, try again ...
Not mounted successfully, try again ...
Not mounted successfully, try again ...
Not mounted successfully, try again ...
Not mounted successfully, try again ...
Not mounted successfully, try again ...
Not mounted successfully, try again ...
Not mounted successfully, try again ...
Not mounted successfully, try again ...
Cannot mount rootfs file system, give up!
请问问题出在哪里?卖家发给我的是TV版的系统
|
|