找回密码
 立即注册

QQ登录

只需一步,快速开始

搜索
广告投放联系QQ68610888
楼主: hiboyhi***

[2019-03-05]改华硕[N14U N54U]5G 2G的7620老毛子Padavan固件(私人云储存 aria2 QOS)

   火... [复制链接]
liangfz 发表于 2016-5-21 23:31
我就是来看看,今天更新了2次,到底是更新了什么……

今天的更新主要是:
1. 流量监控增加了对UDP数据的监控。
2. 修复了KMS服务自动生效的配置问题。
我的恩山、我的无线 The best wifi forum is right here.
回复

使用道具 举报

hao5764 发表于 2016-5-20 23:10
其实好简单。www.ngrok.cc/login 注册个账号。域名列表哪里 新增系统分配域名,假设deet,完成。

去扩 ...

我也mark一下 看看
我的恩山、我的无线 The best wifi forum is right here.
回复

使用道具 举报

 楼主| | 显示全部楼层
lurixian 发表于 2016-5-21 23:53
05-21版本讯雷远程下载出问题了,之前05-18都很好用的

May 21 23:46:00 dnsmasq[3305]: read /etc/hosts ...

迅雷下载: 如果出现错误可以手动启动,输入以下命令测试
迅雷下载: export LD_LIBRARY_PATH=/media/AiCard_01/xunlei/lib ; /media/AiCard_01/xunlei/portal

手动运行,先看看是不是服务器问题,服务器进程出问题。
可以试试格式化储存设备重启路由

点评

远程讯雷还是不能用 以下是手动启动: initing... try stopping xunlei service first... killall: ETMDaemon: no process killed killall: EmbedThunderManager: no process killed killall: vod_httpserver:  详情 回复 发表于 2016-5-22 02:54
好的,现在准备把移动硬盘都格了,从新刷,你的7620固件还没上传好呢,等你上传好换最新的用  详情 回复 发表于 2016-5-22 02:10
我的恩山、我的无线 The best wifi forum is right here.
回复

使用道具 举报

k2刷后LED为红色,能上网,能不能连通网络后变蓝色
我的恩山、我的无线 The best wifi forum is right here.
回复

使用道具 举报

本帖最后由 wantcity 于 2016-5-22 02:12 编辑

21日的流量监控改进了不少,N14U系列的都比较正常了,

目前发现流量单位应该不是bps了,直接用统一的KB做单位了,页面标注的单位是错了“KBPS”全大写,应该是KB/S吧。

点评

KB/S = KBPS 啊,只是大家习惯而已。  发表于 2016-5-22 14:25
我的恩山、我的无线 The best wifi forum is right here.
回复

使用道具 举报

hiboyhiboyhiboy 发表于 2016-5-22 02:04
迅雷下载: 如果出现错误可以手动启动,输入以下命令测试
迅雷下载: export LD_LIBRARY_PATH=/media/AiCa ...

好的,现在准备把移动硬盘都格了,从新刷,你的7620固件还没上传好呢,等你上传好换最新的用
我的恩山、我的无线 The best wifi forum is right here.
回复

使用道具 举报

hiboyhiboyhiboy 发表于 2016-5-22 02:04
迅雷下载: 如果出现错误可以手动启动,输入以下命令测试
迅雷下载: export LD_LIBRARY_PATH=/media/AiCa ...

远程讯雷还是不能用
以下是手动启动:
initing...
try stopping xunlei service first...
killall: ETMDaemon: no process killed
killall: EmbedThunderManager: no process killed
killall: vod_httpserver: no process killed
setting xunlei runtime env...
port: 9000 is usable.

YOUR CONTROL PORT IS: 9000

starting xunlei service...
Connecting to 127.0.0.1:9000 (127.0.0.1:9000)
setting xunlei runtime env...
port: 9000 is usable.

YOUR CONTROL PORT IS: 9000

starting xunlei service...

getting xunlei service info...
wget: can't connect to remote host (127.0.0.1): Connection refused
Connecting to 127.0.0.1:9000 (127.0.0.1:9000)
xunlei service is not ready now.

try again...(has tried 1 time(s)).
getting xunlei service info...
wget: can't connect to remote host (127.0.0.1): Connection refused
Connecting to 127.0.0.1:9000 (127.0.0.1:9000)
xunlei service is not ready now.

try again...(has tried 2 time(s)).
getting xunlei service info...
wget: can't connect to remote host (127.0.0.1): Connection refused
Connecting to 127.0.0.1:9000 (127.0.0.1:9000)
xunlei service is not ready now.

try again...(has tried 3 time(s)).
getting xunlei service info...
wget: can't connect to remote host (127.0.0.1): Connection refused
Connecting to 127.0.0.1:9000 (127.0.0.1:9000)
xunlei service is not ready now.

try again...(has tried 4 time(s)).
getting xunlei service info...
wget: can't connect to remote host (127.0.0.1): Connection refused
Connecting to 127.0.0.1:9000 (127.0.0.1:9000)
xunlei service is not ready now.

try again...(has tried 5 time(s)).
getting xunlei service info...
wget: can't connect to remote host (127.0.0.1): Connection refused
Connecting to 127.0.0.1:9000 (127.0.0.1:9000)
xunlei service is not ready now.

try again...(has tried 6 time(s)).
getting xunlei service info...
wget: can't connect to remote host (127.0.0.1): Connection refused
Connecting to 127.0.0.1:9000 (127.0.0.1:9000)
xunlei service is not ready now.

try again...(has tried 7 time(s)).
getting xunlei service info...
wget: can't connect to remote host (127.0.0.1): Connection refused
Connecting to 127.0.0.1:9000 (127.0.0.1:9000)
xunlei service is not ready now.

try again...(has tried 8 time(s)).
getting xunlei service info...
wget: can't connect to remote host (127.0.0.1): Connection refused
Connecting to 127.0.0.1:9000 (127.0.0.1:9000)
xunlei service is not ready now.

try again...(has tried 9 time(s)).
getting xunlei service info...
wget: error getting response: Connection reset by peer
Connecting to 127.0.0.1:9000 (127.0.0.1:9000)
xunlei service is not ready now.

try again...(has tried 10 time(s)).
getting xunlei service info...
wget: error getting response: Connection reset by peer
Connecting to 127.0.0.1:9000 (127.0.0.1:9000)
xunlei service is not ready now.

try again...(has tried 11 time(s)).
getting xunlei service info...
wget: can't connect to remote host (127.0.0.1): Connection refused
Connecting to 127.0.0.1:9000 (127.0.0.1:9000)
xunlei service is not ready now.

try again...(has tried 12 time(s)).
getting xunlei service info...
wget: can't connect to remote host (127.0.0.1): Connection refused
Connecting to 127.0.0.1:9000 (127.0.0.1:9000)
xunlei service is not ready now.

try again...(has tried 13 time(s)).
getting xunlei service info...
wget: can't connect to remote host (127.0.0.1): Connection refused
Connecting to 127.0.0.1:9000 (127.0.0.1:9000)
xunlei service is not ready now.

try again...(has tried 14 time(s)).
getting xunlei service info...
wget: can't connect to remote host (127.0.0.1): Connection refused
Connecting to 127.0.0.1:9000 (127.0.0.1:9000)
xunlei service is not ready now.

try again...(has tried 15 time(s)).
getting xunlei service info...
wget: can't connect to remote host (127.0.0.1): Connection refused
Connecting to 127.0.0.1:9000 (127.0.0.1:9000)
xunlei service is not ready now.

try again...(has tried 16 time(s)).
getting xunlei service info...
wget: can't connect to remote host (127.0.0.1): Connection refused
Connecting to 127.0.0.1:9000 (127.0.0.1:9000)
xunlei service is not ready now.

try again...(has tried 17 time(s)).
getting xunlei service info...
wget: can't connect to remote host (127.0.0.1): Connection refused
Connecting to 127.0.0.1:9000 (127.0.0.1:9000)
xunlei service is not ready now.

try again...(has tried 18 time(s)).
getting xunlei service info...
wget: can't connect to remote host (127.0.0.1): Connection refused
Connecting to 127.0.0.1:9000 (127.0.0.1:9000)
xunlei service is not ready now.

try again...(has tried 19 time(s)).
getting xunlei service info...
wget: can't connect to remote host (127.0.0.1): Connection refused
xunlei service is not ready now.
fail to get xunlei service info finaly.
finished.


日志方面是这样:
May 22 02:47:12 crond[1615]: crond (busybox 1.24.2) started, log level 8
May 22 02:47:30 sh_download: 下载失败:【/tmp/xunlei.info】 URL:【http://127.0.0.1:9000/getsysinfo
May 22 02:47:30 sh_download: 重新下载:【/tmp/xunlei.info】 URL:【http://127.0.0.1:9001/getsysinfo
May 22 02:47:46 sh_download: 下载失败:【/tmp/xunlei.info】 URL:【http://127.0.0.1:9001/getsysinfo
May 22 02:47:46 sh_download: 下载失败:【/tmp/xunlei.info】 URL:【http://192.168.8.1:9000/getsysinfo
May 22 02:47:46 sh_download: 重新下载:【/tmp/xunlei.info】 URL:【http://192.168.8.1:9001/getsysinfo
May 22 02:48:02 sh_download: 下载失败:【/tmp/xunlei.info】 URL:【http://192.168.8.1:9001/getsysinfo
May 22 02:48:02 迅雷下载: 启动xunlei,绑定设备页面【http://yuancheng.xunlei.com
May 22 02:48:02 迅雷下载: 在浏览器中输入【http://192.168.8.1:9000/getsysinfo
May 22 02:48:02 迅雷下载: 显示错误则输入【http://192.168.8.1:9001/getsysinfo
May 22 02:48:02 迅雷下载: 会看到类似如下信息:
May 22 02:48:02 迅雷下载:
May 22 02:48:02 迅雷下载: 其中有用的几项为:
May 22 02:48:02 迅雷下载: ①:0表示返回结果成功
May 22 02:48:02 迅雷下载: ②:1表示检测网络正常,0表示检测网络异常
May 22 02:48:02 迅雷下载: ④:1表示已绑定成功,0表示未绑定
May 22 02:48:02 迅雷下载: ⑤:未绑定的情况下,为绑定的需要的激活码
May 22 02:48:02 迅雷下载: ⑥:1表示磁盘挂载检测成功,0表示磁盘挂载检测失败
May 22 02:48:02 迅雷下载: 如果出现错误可以手动启动,输入以下命令测试
May 22 02:48:02 迅雷下载: export LD_LIBRARY_PATH=/media/AiCard_01/xunlei/lib ; /media/AiCard_01/xunlei/portal
May 22 02:48:03 迅雷下载: 守护进程启动AiCard_01
May 22 02:48:03 迅雷下载: 重新启动
May 22 02:49:14 迅雷下载: 重新启动
May 22 02:50:06 bwmon[1288]: MI2C-xiaomishouji join your network: IP: 192.168.8.106, MAC: ac:f7:f3:19:3f:91!
May 22 02:51:36 迅雷下载: 重新启动
May 22 02:52:47 迅雷下载: 重新启动


我刷的RT-N14U-GPIO-1-7620-128M
我路由器coowifi   有内存卡,再挂移动硬盘

点评

xunlei service is not ready now. 迅雷服务没有准备好。自己检查dns或者其他影响联网的问题。  发表于 2016-5-22 08:53
我的恩山、我的无线 The best wifi forum is right here.
回复

使用道具 举报


这不是ram垃圾回收的问题吗?有其他解决方案吗。不可能因噎废食

点评

子非鱼,关注路由内存占用高低有意义?去百度一下linux内存管理机制吧。有需要的可以买一条内存条放在一旁,就有很多空余内存了  详情 回复 发表于 2016-5-22 08:59
我的恩山、我的无线 The best wifi forum is right here.
回复

使用道具 举报

以后会加上lan限速功能吗?
我的恩山、我的无线 The best wifi forum is right here.
回复

使用道具 举报

本帖最后由 df81 于 2016-5-22 08:35 编辑

请问负载平均的三个值分别代表什么意思,刷5.21的固件,有时候网络基本上没有用,但是中间的一个会显示黄色。

联想newifi mini,仅开adbyby,其它默认
日志:
May 22 00:06:00 crond[1394]: USER  pid 30511 cmd nvram set adbyby_status=0000 && /tmp/sh_func_load_adbyby.sh &
May 22 00:06:00 iptables: 删除8118转发规则
May 22 00:06:04 iptables: 删除8118转发规则
May 22 00:06:08 adbyby: 启动adbyby程序
May 22 00:06:09 【adbyby】: 第一次加载规则完毕
May 22 00:06:09 dnsmasq[7542]: exiting on receipt of SIGTERM
May 22 00:06:10 dnsmasq[30691]: started, version 2.75 cachesize 1024
May 22 00:06:10 dnsmasq[30691]: compile time options: IPv6 GNU-getopt no-RTC no-DBus no-i18n no-IDN DHCP DHCPv6 no-scripts TFTP no-conntrack ipset no-auth no-DNSSEC no-loop-detect no-inotify
May 22 00:06:10 dnsmasq-dhcp[30691]: DHCP, IP range 192.168.0.2 -- 192.168.0.244, lease time 7d
May 22 00:06:10 dnsmasq-dhcp[30691]: DHCP, sockets bound exclusively to interface br0
May 22 00:06:10 dnsmasq[30691]: read /etc/hosts - 7 addresses
May 22 00:06:10 dnsmasq[30691]: read /etc/storage/dnsmasq/hosts - 0 addresses
May 22 00:06:10 dnsmasq-dhcp[30691]: read /etc/dnsmasq/dhcp/dhcp-hosts.rc
May 22 00:06:10 dnsmasq[30691]: using nameserver 119.29.29.29#53
May 22 00:06:10 dnsmasq[30691]: using nameserver 180.76.76.76#53
May 22 00:06:10 dnsmasq[30691]: using nameserver 202.175.3.8#53
May 22 00:06:11 adbyby: 启动完成
May 22 00:06:11 adbyby: 【全局模式】 lazy更新:!  -----��� 2016-5-20 23:35:58   by:xwhyc-----^M
May 22 00:06:11 adbyby: 【全局模式】 video更新:!  -----��� 2016-5-20 23:40:21   by:xwhyc-----------------------------------------------^M
May 22 00:06:11 adbyby: 第三方规则行数:  行
May 22 00:06:11 adbyby: 自定义规则行数: 3 行
May 22 00:06:11 adbyby: adbyby 进程守护启动
May 22 00:06:12 adbyby: 找不到8118转发规则,重新添加
May 22 00:06:12 iptables: 添加8118转发规则
May 22 00:06:12 dnsmasq[30691]: exiting on receipt of SIGTERM
May 22 00:06:13 dnsmasq[30807]: started, version 2.75 cachesize 1024
May 22 00:06:13 dnsmasq[30807]: compile time options: IPv6 GNU-getopt no-RTC no-DBus no-i18n no-IDN DHCP DHCPv6 no-scripts TFTP no-conntrack ipset no-auth no-DNSSEC no-loop-detect no-inotify
May 22 00:06:13 dnsmasq-dhcp[30807]: DHCP, IP range 192.168.0.2 -- 192.168.0.244, lease time 7d
May 22 00:06:13 dnsmasq-dhcp[30807]: DHCP, sockets bound exclusively to interface br0
May 22 00:06:13 dnsmasq[30807]: read /etc/hosts - 7 addresses
May 22 00:06:13 dnsmasq[30807]: read /etc/storage/dnsmasq/hosts - 0 addresses
May 22 00:06:13 dnsmasq-dhcp[30807]: read /etc/dnsmasq/dhcp/dhcp-hosts.rc
May 22 00:06:13 dnsmasq[30807]: using nameserver 119.29.29.29#53
May 22 00:06:13 dnsmasq[30807]: using nameserver 180.76.76.76#53
May 22 00:06:13 dnsmasq[30807]: using nameserver 202.175.3.8#53
May 22 00:06:32 dnsmasq[30807]: exiting on receipt of SIGTERM
May 22 00:06:32 dnsmasq[30869]: started, version 2.75 cachesize 1024
May 22 00:06:32 dnsmasq[30869]: compile time options: IPv6 GNU-getopt no-RTC no-DBus no-i18n no-IDN DHCP DHCPv6 no-scripts TFTP no-conntrack ipset no-auth no-DNSSEC no-loop-detect no-inotify
May 22 00:06:32 dnsmasq-dhcp[30869]: DHCP, IP range 192.168.0.2 -- 192.168.0.244, lease time 7d
May 22 00:06:32 dnsmasq-dhcp[30869]: DHCP, sockets bound exclusively to interface br0
May 22 00:06:32 dnsmasq[30869]: read /etc/hosts - 7 addresses
May 22 00:06:32 dnsmasq[30869]: read /etc/storage/dnsmasq/hosts - 0 addresses
May 22 00:06:32 dnsmasq-dhcp[30869]: read /etc/dnsmasq/dhcp/dhcp-hosts.rc
May 22 00:06:32 dnsmasq[30869]: using nameserver 119.29.29.29#53
May 22 00:06:32 dnsmasq[30869]: using nameserver 180.76.76.76#53
May 22 00:06:32 dnsmasq[30869]: using nameserver 202.175.3.8#53
May 22 01:25:00 crond[1394]: USER  pid 4329 cmd /sbin/ss.sh update &
May 22 01:25:00 dnsmasq[30869]: exiting on receipt of SIGTERM
May 22 01:25:00 dnsmasq[4398]: started, version 2.75 cachesize 1024
May 22 01:25:00 dnsmasq[4398]: compile time options: IPv6 GNU-getopt no-RTC no-DBus no-i18n no-IDN DHCP DHCPv6 no-scripts TFTP no-conntrack ipset no-auth no-DNSSEC no-loop-detect no-inotify
May 22 01:25:00 dnsmasq-dhcp[4398]: DHCP, IP range 192.168.0.2 -- 192.168.0.244, lease time 7d
May 22 01:25:00 dnsmasq-dhcp[4398]: DHCP, sockets bound exclusively to interface br0
May 22 01:25:00 dnsmasq[4398]: read /etc/hosts - 7 addresses
May 22 01:25:00 dnsmasq[4398]: read /etc/storage/dnsmasq/hosts - 0 addresses
May 22 01:25:00 dnsmasq-dhcp[4398]: read /etc/dnsmasq/dhcp/dhcp-hosts.rc
May 22 01:25:00 dnsmasq[4398]: using nameserver 119.29.29.29#53
May 22 01:25:00 dnsmasq[4398]: using nameserver 180.76.76.76#53
May 22 01:25:00 dnsmasq[4398]: using nameserver 202.175.3.8#53
May 22 01:25:00 SS: SS service stop.
May 22 01:25:01 SS: 脚本完成
May 22 03:51:34 NTP Client: Synchronizing time to ntp1.aliyun.com.
May 22 03:51:35 NTP Client: System time changed, offset: 0.029484s
May 22 06:06:00 crond[1394]: USER  pid 10048 cmd nvram set adbyby_status=0000 && /tmp/sh_func_load_adbyby.sh &
May 22 06:06:00 iptables: 删除8118转发规则
May 22 06:06:04 iptables: 删除8118转发规则
May 22 06:06:08 adbyby: 启动adbyby程序
May 22 06:06:09 【adbyby】: 第一次加载规则完毕
May 22 06:06:09 dnsmasq[4398]: exiting on receipt of SIGTERM
May 22 06:06:09 dnsmasq[10227]: started, version 2.75 cachesize 1024
May 22 06:06:09 dnsmasq[10227]: compile time options: IPv6 GNU-getopt no-RTC no-DBus no-i18n no-IDN DHCP DHCPv6 no-scripts TFTP no-conntrack ipset no-auth no-DNSSEC no-loop-detect no-inotify
May 22 06:06:09 dnsmasq-dhcp[10227]: DHCP, IP range 192.168.0.2 -- 192.168.0.244, lease time 7d
May 22 06:06:09 dnsmasq-dhcp[10227]: DHCP, sockets bound exclusively to interface br0
May 22 06:06:09 dnsmasq[10227]: read /etc/hosts - 7 addresses
May 22 06:06:09 dnsmasq[10227]: read /etc/storage/dnsmasq/hosts - 0 addresses
May 22 06:06:09 dnsmasq-dhcp[10227]: read /etc/dnsmasq/dhcp/dhcp-hosts.rc
May 22 06:06:09 dnsmasq[10227]: using nameserver 119.29.29.29#53
May 22 06:06:09 dnsmasq[10227]: using nameserver 180.76.76.76#53
May 22 06:06:09 dnsmasq[10227]: using nameserver 202.175.3.8#53
May 22 06:06:11 adbyby: 启动完成
May 22 06:06:11 adbyby: 【全局模式】 lazy更新:!  -----��� 2016-5-20 23:35:58   by:xwhyc-----^M
May 22 06:06:11 adbyby: 【全局模式】 video更新:!  -----��� 2016-5-20 23:40:21   by:xwhyc-----------------------------------------------^M
May 22 06:06:11 adbyby: 第三方规则行数:  行
May 22 06:06:11 adbyby: 自定义规则行数: 3 行
May 22 06:06:11 adbyby: adbyby 进程守护启动
May 22 06:06:12 adbyby: 找不到8118转发规则,重新添加
May 22 06:06:12 iptables: 添加8118转发规则
May 22 06:06:12 dnsmasq[10227]: exiting on receipt of SIGTERM
May 22 06:06:12 dnsmasq[10332]: started, version 2.75 cachesize 1024
May 22 06:06:12 dnsmasq[10332]: compile time options: IPv6 GNU-getopt no-RTC no-DBus no-i18n no-IDN DHCP DHCPv6 no-scripts TFTP no-conntrack ipset no-auth no-DNSSEC no-loop-detect no-inotify
May 22 06:06:12 dnsmasq-dhcp[10332]: DHCP, IP range 192.168.0.2 -- 192.168.0.244, lease time 7d
May 22 06:06:12 dnsmasq-dhcp[10332]: DHCP, sockets bound exclusively to interface br0
May 22 06:06:12 dnsmasq[10332]: read /etc/hosts - 7 addresses
May 22 06:06:12 dnsmasq[10332]: read /etc/storage/dnsmasq/hosts - 0 addresses
May 22 06:06:12 dnsmasq-dhcp[10332]: read /etc/dnsmasq/dhcp/dhcp-hosts.rc
May 22 06:06:12 dnsmasq[10332]: using nameserver 119.29.29.29#53
May 22 06:06:12 dnsmasq[10332]: using nameserver 180.76.76.76#53
May 22 06:06:12 dnsmasq[10332]: using nameserver 202.175.3.8#53
May 22 06:06:32 dnsmasq[10332]: exiting on receipt of SIGTERM
May 22 06:06:32 dnsmasq[10393]: started, version 2.75 cachesize 1024
May 22 06:06:32 dnsmasq[10393]: compile time options: IPv6 GNU-getopt no-RTC no-DBus no-i18n no-IDN DHCP DHCPv6 no-scripts TFTP no-conntrack ipset no-auth no-DNSSEC no-loop-detect no-inotify
May 22 06:06:32 dnsmasq-dhcp[10393]: DHCP, IP range 192.168.0.2 -- 192.168.0.244, lease time 7d
May 22 06:06:32 dnsmasq-dhcp[10393]: DHCP, sockets bound exclusively to interface br0
May 22 06:06:32 dnsmasq[10393]: read /etc/hosts - 7 addresses
May 22 06:06:32 dnsmasq[10393]: read /etc/storage/dnsmasq/hosts - 0 addresses
May 22 06:06:32 dnsmasq-dhcp[10393]: read /etc/dnsmasq/dhcp/dhcp-hosts.rc
May 22 06:06:32 dnsmasq[10393]: using nameserver 119.29.29.29#53
May 22 06:06:32 dnsmasq[10393]: using nameserver 180.76.76.76#53
May 22 06:06:32 dnsmasq[10393]: using nameserver 202.175.3.8#53

本帖子中包含更多资源

您需要 登录 才可以下载或查看,没有账号?立即注册

×

点评

你可以去百度负载平均,估计第一条就有答案。如这些简单问题如果百度不能找到,我也不知道。  发表于 2016-5-22 09:05
我的恩山、我的无线 The best wifi forum is right here.
回复

使用道具 举报

newifi mini作为交换机使用,本来5G没开,然后打开就显示没有internet
但是2。4G的就可以上网,重启后才可以5G,这是bug吗?
我的恩山、我的无线 The best wifi forum is right here.
回复

使用道具 举报

bigandy 发表于 2016-5-22 00:09
今天的更新主要是:
1. 流量监控增加了对UDP数据的监控。
2. 修复了KMS服务自动生效的配置问题。

我的恩山、我的无线 The best wifi forum is right here.
回复

使用道具 举报

22日又有更新啊
好频繁  辛苦
我的恩山、我的无线 The best wifi forum is right here.
回复

使用道具 举报

bigandy 发表于 2016-5-21 19:25
opkg install mysql-server --force-overwrite

谢谢!看了帖子 几乎对每个问题都有回复,这种做事态度 想不成功都难
我的恩山、我的无线 The best wifi forum is right here.
回复

使用道具 举报

建议大神加入虚拟运存,这么多脚本,128M根本不够啊!

点评

看说明有教怎么添加Swap(即:交换分区),类似于Windows的虚拟内存  发表于 2016-5-22 09:01
我的恩山、我的无线 The best wifi forum is right here.
回复

使用道具 举报

您需要登录后才可以回帖 登录 | 立即注册

本版积分规则

有疑问请添加管理员QQ86788181|手机版|小黑屋|Archiver|恩山无线论坛(常州市恩山计算机开发有限公司版权所有) ( 苏ICP备05084872号 )

GMT+8, 2024-4-27 10:22

Powered by Discuz! X3.5

© 2001-2024 Discuz! Team.

| 江苏省互联网有害信息举报中心 举报信箱:js12377 | @jischina.com.cn 举报电话:025-88802724 本站不良内容举报信箱:68610888@qq.com 举报电话:0519-86695797

快速回复 返回顶部 返回列表