找回密码
 立即注册

QQ登录

只需一步,快速开始

搜索
广告投放联系QQ68610888
查看: 2881|回复: 5

linksys wrt610n v1变砖了

[复制链接]
发表于 2014-7-30 15:05 | 显示全部楼层 |阅读模式
我的linksys wrt610n v1 刷的 TT的固件变砖了。想刷回原厂的固件。没有办法,可试的法子多试了,灯再闪。可ping通,但进不了192.168.1.1,求大神们帮个忙。看有救没。咋回事。我的QQ331557453.能远程修好不。求救中。谁来帮个忙
我的恩山、我的无线 The best wifi forum is right here.
发表于 2014-7-30 19:49 | 显示全部楼层
用TTL連進去試試
我的恩山、我的无线 The best wifi forum is right here.
回复

使用道具 举报

发表于 2014-7-31 00:41 | 显示全部楼层
这个应该好弄吧

TFTP刷机试试
我的恩山、我的无线 The best wifi forum is right here.
回复

使用道具 举报

 楼主| 发表于 2014-7-31 11:59 | 显示全部楼层
tftp可以上传DD小固件,但就是打不开网页。
我的恩山、我的无线 The best wifi forum is right here.
回复

使用道具 举报

 楼主| 发表于 2014-7-31 11:59 | 显示全部楼层
用TTL連進了,但进不了CFE模式
我的恩山、我的无线 The best wifi forum is right here.
回复

使用道具 举报

 楼主| 发表于 2014-7-31 11:59 | 显示全部楼层
CFE version 1.0.37 for BCM947XX (32bit,SP,LE)
Build Date: Wed Jun 25 19:11:21 CST 2008 (ljh@team2-complier)
Copyright (C) 2000,2001,2002,2003 Broadcom Corporation.

Initializing Arena
Initializing PCI. [normal]
PCI bus 0 slot 0/0: vendor 0x14e4 product 0x0800 (flash memory, rev 0x02)
PCI bus 0 slot 1/0: vendor 0x14e4 product 0x471f (ethernet network, rev 0x02)
PCI bus 0 slot 2/0: vendor 0x14e4 product 0x471a (USB serial bus, interface 0x10, rev 0x02)
PCI bus 0 slot 2/1: vendor 0x14e4 product 0x471a (USB serial bus, interface 0x20, rev 0x02)
PCI bus 0 slot 3/0: vendor 0x14e4 product 0x471b (USB serial bus, rev 0x02)
PCI bus 0 slot 4/0: vendor 0x14e4 product 0x0804 (PCI bridge, rev 0x02)
PCI bus 0 slot 5/0: vendor 0x14e4 product 0x0816 (MIPS processor, rev 0x02)
PCI bus 0 slot 6/0: vendor 0x14e4 product 0x471d (IDE mass storage, rev 0x02)
PCI bus 0 slot 7/0: vendor 0x14e4 product 0x4718 (network/computing crypto, rev 0x02)
PCI bus 0 slot 8/0: vendor 0x14e4 product 0x080f (RAM memory, rev 0x02)
PCI bus 0 slot 9/0: vendor 0x14e4 product 0x471e (class 0xfe, subclass 0x00, rev 0x02)
Initializing Devices.

No DPN
This is a Parallel Flash
Boot partition size = 262144(0x40000)
Partition information:
boot    #00   00000000 -> 0003FFFF  (262144)
trx     #01   00040000 -> 0004001B  (28)
os      #02   0004001C -> 007F7FFF  (8093668)
nvram   #03   007F8000 -> 007FFFFF  (32768)
Partition information:
boot    #00   00000000 -> 0003FFFF  (262144)
trx     #01   00040000 -> 007F7FFF  (8093696)
nvram   #02   007F8000 -> 007FFFFF  (32768)
PCI bus 0 slot 1/0: pci_map_mem: attempt to map 64-bit region tag=0x800 @ addr=18010004
PCI bus 0 slot 1/0: pci_map_mem: addr=0x18010004 pa=0x18010000
ge0: BCM5750 Ethernet at 0x18010000
CPU type 0x2901A: 300MHz
Total memory: 65536 KBytes

Total memory used by CFE:  0x80700000 - 0x807A60E0 (680160)
Initialized Data:          0x8073A2E0 - 0x8073E570 (17040)
BSS Area:                  0x8073E570 - 0x807400E0 (7024)
Local Heap:                0x807400E0 - 0x807A40E0 (409600)
Stack Area:                0x807A40E0 - 0x807A60E0 (8192)
Text (code) segment:       0x80700000 - 0x8073A2E0 (238304)
Boot area (physical):      0x007A7000 - 0x007E7000
Relocation Factor:         I:00000000 - D:00000000

Boot version: v4.2
The boot is CFE

mac_init(): Find mac [00:22:6B:79:B5:5F] in location 1
Nothing...
country_init(): Find country code in location 0
The country is same
CMD: [ifconfig eth0 -addr=192.168.1.1 -mask=255.255.255.0]
eth0: Link speed: 1000BaseT FDX
Device eth0:  hwaddr 00-22-6B-79-B5-5F, ipaddr 192.168.1.1, mask 255.255.255.0
        gateway not set, nameserver not set
CMD: [go;]
Check CRC of image1
  Len:     0x6CD000     (7131136)       (0xBC040000)
  Offset0: 0x1C         (28)            (0xBC04001C)
  Offset1: 0xAD8        (2776)  (0xBC040AD8)
  Offset2: 0xE4800      (935936)        (0xBC124800)
  Header CRC:    0x6B4CE854
  Calculate CRC: 0x6B4CE854
Image 1 is OK
Try to load image 1.
CMD: [load -raw -addr=0x807a60e0 -max=0x3a0000 :]
Loader:raw Filesys:tftp Dev:eth0 File:: Optionsnull)
Loading: Failed.
Could not load :: Timeout occured
CMD: [boot -raw -z -addr=0x80001000 -max=0x3a0000 flash0.os:]
Loader:raw Filesys:raw Dev:flash0.os File: Optionsnull)
Loading: .. 5192 bytes read
Entry at 0x80001000
Closing network.
eth0: cannot clear 140Starting program at 0x80001000
Linux version 2.6.22.19 (root@tomato) (gcc version 4.2.4) #1 Tue Jan 17 15:02:52 CST 2012
CPU revision is: 0002901a
Setting the PFC to its default value
Determined physical RAM map:
memory: 04000000 @ 00000000 (usable)
Built 1 zonelists.  Total pages: 16256
Kernel command line: root=/dev/mtdblock2 noinitrd console=ttyS0,115200
Primary instruction cache 32kB, physically tagged, 4-way, linesize 16 bytes.
Primary data cache 32kB, 2-way, linesize 16 bytes.
Synthesized TLB refill handler (19 instructions).
Synthesized TLB load handler fastpath (31 instructions).
Synthesized TLB store handler fastpath (31 instructions).
Synthesized TLB modify handler fastpath (30 instructions).
PID hash table entries: 256 (order: 8, 1024 bytes)
CPU: BCM4785 rev 2 pkg 12 at 300 MHz
Using 150.000 MHz high precision timer.
console [ttyS0] enabled
Dentry cache hash table entries: 8192 (order: 3, 32768 bytes)
Inode-cache hash table entries: 4096 (order: 2, 16384 bytes)
Memory: 61848k/65536k available (2317k kernel code, 3628k reserved, 456k data, 112k init, 0k highmem)
SLUB: Genslabs=6, HWalign=32, Order=0-1, MinObjects=4, CPUs=1, Nodes=1
Mount-cache hash table entries: 512
NET: Registered protocol family 16
PCI: Initializing host
PCI: Fixing up bus 0
PCI: Fixing up bridge
PCI: Fixing up bus 1
Time: MIPS clocksource has been installed.
NET: Registered protocol family 2
IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
TCP established hash table entries: 2048 (order: 2, 16384 bytes)
TCP bind hash table entries: 2048 (order: 1, 8192 bytes)
TCP: Hash tables configured (established 2048 bind 2048)
TCP reno registered
squashfs: version 3.0 (2006/03/15) Phillip Lougher
io scheduler noop registered (default)
HDLC line discipline: version $Revision: 4.8 $, maxframe=4096
N_HDLC line discipline registered.
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled
serial8250: ttyS0 at MMIO 0x0 (irq = 8) is a 16550A
serial8250: ttyS1 at MMIO 0x0 (irq = 8) is a 16550A
PPP generic driver version 2.4.2
PPP Deflate Compression module registered
MPPE/MPPC encryption/compression module registered
NET: Registered protocol family 24
PPPoL2TP kernel driver, V0.17
PPTP driver version 0.8.5
Physically mapped flash: Found 1 x16 devices at 0x0 in 16-bit bank
Amd/Fujitsu Extended Query Table at 0x0040
number of CFI chips: 1
cfi_cmdset_0002: Disabling erase-suspend-program due to code brokenness.
Flash device: 0x800000 at 0x1c000000
Creating 5 MTD partitions on "hysically mapped flash":
0x00000000-0x00040000 : "pmon"
0x00040000-0x007f0000 : "linux"
0x00124800-0x00710000 : "rootfs"
0x00710000-0x007f0000 : "jffs2"
0x007f0000-0x00800000 : "nvram"
Found a 0MB  serial flash
sflash: found no supported devices
u32 classifier
    OLD policer on
Netfilter messages via NETLINK v0.30.
nf_conntrack version 0.5.0 (512 buckets, 4096 max)
ip_tables: (C) 2000-2006 Netfilter Core Team
net/ipv4/netfilter/tomato_ct.c [Jan 17 2012 15:02:52]
NET: Registered protocol family 1
NET: Registered protocol family 17
802.1Q VLAN Support v1.8 Ben Greear <greearb@candelatech.com>
All bugs added by David S. Miller <davem@redhat.com>
VFS: Mounted root (squashfs filesystem) readonly.
Freeing unused kernel memory: 112k freed
Warning: unable to open an initial console.


Hit ENTER for console...

Erasing 0x0 - 0xffff
Restarting system.
Please stand by while rebooting the system...
我的恩山、我的无线 The best wifi forum is right here.
回复

使用道具 举报

您需要登录后才可以回帖 登录 | 立即注册

本版积分规则

有疑问请添加管理员QQ86788181|手机版|小黑屋|Archiver|恩山无线论坛(常州市恩山计算机开发有限公司版权所有) ( 苏ICP备05084872号 )

GMT+8, 2024-4-26 22:54

Powered by Discuz! X3.5

© 2001-2024 Discuz! Team.

| 江苏省互联网有害信息举报中心 举报信箱:js12377 | @jischina.com.cn 举报电话:025-88802724 本站不良内容举报信箱:68610888@qq.com 举报电话:0519-86695797

快速回复 返回顶部 返回列表