原生IPV6怎么整

nib***

LGA1150 发表于 2018-9-18 15:32
另外还有 ip6tables 防火墙设置，我觉得是这个的问题

以下命令是允许所有 IPv6

你好，问下这个防火墙设置需要在路由器上怎么操作，这段文字输在哪里啊？

see***

楼主的问题解决了吗，我也遇到同样的问题。

dee***

一样的问题，楼主找到解决方案了吗？

zea***

LGA1150 发表于 2018-9-18 15:07
打住，把 sysctl 结果发给我看看

老哥求救，我也是用那三条命令的方法，路由器本身分配不到ipv6 wan和lan
这个是sysctl结果
net.ipv6.conf.br0.accept_dad = 1
net.ipv6.conf.br0.accept_ra = 2
net.ipv6.conf.br0.accept_ra_defrtr = 1
net.ipv6.conf.br0.accept_ra_pinfo = 0
net.ipv6.conf.br0.accept_ra_rtr_pref = 1
net.ipv6.conf.br0.accept_redirects = 1
net.ipv6.conf.br0.accept_source_route = 0
net.ipv6.conf.br0.autoconf = 1
net.ipv6.conf.br0.dad_transmits = 2
net.ipv6.conf.br0.disable_ipv6 = 0
net.ipv6.conf.br0.force_mld_version = 0
net.ipv6.conf.br0.force_tllao = 0
net.ipv6.conf.br0.forwarding = 1
net.ipv6.conf.br0.hop_limit = 64
net.ipv6.conf.br0.max_addresses = 16
net.ipv6.conf.br0.max_desync_factor = 600
net.ipv6.conf.br0.mc_forwarding = 0
net.ipv6.conf.br0.mtu = 1500
net.ipv6.conf.br0.proxy_ndp = 0
net.ipv6.conf.br0.regen_max_retry = 3
net.ipv6.conf.br0.router_probe_interval = 60
net.ipv6.conf.br0.router_solicitation_delay = 1
net.ipv6.conf.br0.router_solicitation_interval = 4
net.ipv6.conf.br0.router_solicitations = 3
net.ipv6.conf.br0.temp_prefered_lft = 86400
net.ipv6.conf.br0.temp_valid_lft = 604800
net.ipv6.conf.br0.use_tempaddr = 0

stoc***

deep09 发表于 2019-7-9 19:54
一样的问题，楼主找到解决方案了吗？

没戏改用OP了，每个口都能拿到V6

mqc***

stock169 发表于 2019-9-5 09:24
没戏改用OP了，每个口都能拿到V6

我也一样的问题，改用OP是什么意思？