newifi3安装Adguard Home 是显示空间不足怎么解决

Cars***

newifi3安装Adguard Home 是显示空间不足怎么解决，麻烦分享个详细教程
日志

  5750K .......... .......... .......... .......... .......... 98% 4.68M 0s
  5800K .......... .......... .......... .......... .......... 99% 4.84M 0s
  5850K .......... .......... .......... ...                  100% 7.67M=11s

2020-04-06 05:12:52 (527 KB/s) - '/tmp/AdGuardHomeupdate/AdGuardHome_linux_mipsle.tar.gz' saved [6024482/6024482]

download success start copy
start copy
uci: I/O error
sed: can't create temp file '/etc/hostsXXXXXX': No space left on device
sh: write error: No space left on device
cat: write error: No space left on device
AdGuardHome service disabled
Command failed: Not found
mv: write error: No space left on device
mv: can't preserve times of '/usr/bin/AdGuardHome/AdGuardHome': No space left on device
mv: can't preserve ownership of '/usr/bin/AdGuardHome/AdGuardHome': No space left on device
mv: can't preserve permissions of '/usr/bin/AdGuardHome/AdGuardHome': No space left on device
mv failed maybe not enough space please use upx or change bin to /tmp/AdGuardHome

ben***

应该是无解。

https://www.right.com.cn/forum/thread-2481773-1-1.html
这个教程，我这边搞不定。 重启后，发现网络接不上，只能把U盘拨了才可以。

ben***

运行mount /dev/sda1 /tmp/extroot 时提示：


Mount is denied because the NTFS volume is already exclusively opened.
The volume may be already mounted, or another software may use it which could be identified for example by the help of the 'fuser' command.

不知怎么解决

Vlad***

benche 发表于 2020-4-6 19:55
运行mount /dev/sda1 /tmp/extroot 时提示：

不用管，直接运行后面的代码就好了，我昨天才试了

ben***

Vladilena 发表于 2020-4-6 20:02
不用管，直接运行后面的代码就好了，我昨天才试了

刚按你的方法，试了一下，还是不行。

直接运行后面这三行：
tar -C /tmp/introot -cvf - . | tar -C /tmp/extroot -xf -
umount /tmp/introot
umount /tmp/extroot

ben***

哇，可以了。

太棒了，搞了很久。