|
|
K3变成砖了，CFE进不去，TTL下看见不停的重启，log如下。
CFE version 7.14.131.47 (r629548) based on BBP 1.0.37 for BCM947XX (32bit,SP,)
Build Date: Wed May 24 15:44:17 CST 2017 (jenkins@SOHO-OPWRT)
Copyright (C) 2000-2008 Broadcom Corporation.
Init Arena
Init Devs.
Boot partition size = 262144(0x40000)
DDR Clock: 800 MHz
Info: DDR frequency set from clkfreq=1400,*800*
et0: Broadcom BCM47XX 10/100/1000 Mbps Ethernet Controller 7.14.131.47 (r629548)
CPU type 0x0: 1400MHz
Tot mem: 524288 KBytes
CFE mem: 0x00F00000 - 0x017D1E30 (9248304)
Data: 0x00F6A204 - 0x00F6A7D0 (1484)
BSS: 0x00F6A7E0 - 0x00FCFE30 (415312)
Heap: 0x00FCFE30 - 0x017CFE30 (8388608)
Stack: 0x017CFE30 - 0x017D1E30 (8192)
Text: 0x00F00000 - 0x00F5DE2C (384556)
Invalid switch: -mask
Boot program checksum is invalid
flash0.0: Device not found
Loader:raw Filesys:raw Dev:nflash0.os File: Options null)
Loading: ... 1946490 bytes read
Entry at 0x00008000
Starting program at 0x00008000
Uncompressing Linux... done, booting the kernel.
[ 0.000000] Booting Linux on physical CPU 0x0
[ 0.000000] Linux version 4.14.180 (user@ubuntu) (gcc version 7.5.0 (OpenWrt GCC 7.5.0 r1812-0f0c3f1)) #0 SMP Fri May 15 12:10:48 2020
[ 0.000000] CPU: ARMv7 Processor [413fc090] revision 0 (ARMv7), cr=10c5387d
[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[ 0.000000] OF: fdt: Machine model: Phicomm K3
[ 0.000000] Memory policy: Data cache writealloc
[ 0.000000] Hit pending asynchronous external abort (FSR=0x00001c06) during first unmask, this is most likely caused by a firmware/bootloader bug.
[ 0.000000] random: get_random_bytes called from start_kernel+0x90/0x3f8 with crng_init=0
[ 0.000000] percpu: Embedded 14 pages/cpu s26188 r8192 d22964 u57344
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 130784
[ 0.000000] Kernel command line: console=ttyS0,115200
[ 0.000000] PID hash table entries: 512 (order: -1, 2048 bytes)
[ 0.000000] Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
[ 0.000000] Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
[ 0.000000] Memory: 511776K/524288K available (4255K kernel code, 129K rwdata, 1036K rodata, 1024K init, 284K bss, 12512K reserved, 0K cma-reserved, 393216K highmem)
[ 0.000000] Virtual kernel memory layout:
[ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
[ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB)
[ 0.000000] vmalloc : 0xc8800000 - 0xff800000 ( 880 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xc8000000 ( 128 MB)
[ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
[ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
[ 0.000000] .text : 0xc0008000 - 0xc0527f40 (5248 kB)
[ 0.000000] .init : 0xc0700000 - 0xc0800000 (1024 kB)
[ 0.000000] .data : 0xc0800000 - 0xc0820600 ( 130 kB)
[ 0.000000] .bss : 0xc0820600 - 0xc0867988 ( 285 kB)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16
[ 0.000000] L2C: DT/platform modifies aux control register: 0x0a130000 -> 0x0a530000
[ 0.000000] L2C-310 enabling early BRESP for Cortex-A9
[ 0.000000] L2C-310 full line of zeros enabled for Cortex-A9
[ 0.000000] L2C-310 ID prefetch enabled, offset 1 lines
[ 0.000000] L2C-310 dynamic clock gating enabled, standby mode enabled
[ 0.000000] L2C-310 cache controller enabled, 16 ways, 256 kB
[ 0.000000] L2C-310: CACHE_ID 0x410000c8, AUX_CTRL 0x7e530001
[ 0.000009] sched_clock: 64 bits at 700MHz, resolution 1ns, wraps every 4398046511103ns
[ 0.000023] clocksource: arm_global_timer: mask: 0xffffffffffffffff max_cycles: 0xa17102bcf3, max_idle_ns: 440795224838 ns
[ 0.000042] Switching to timer-based delay loop, resolution 1ns
[ 0.000200] Calibrating delay loop (skipped), value calculated using timer frequency.. 1400.00 BogoMIPS (lpj=7000000)
[ 0.000211] pid_max: default: 32768 minimum: 301
[ 0.000296] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.000304] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.000762] CPU: Testing write buffer coherency: ok
[ 0.000791] CPU0: Spectre v2: using BPIALL workaround
[ 0.001021] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
[ 0.001288] Setting up static identity map for 0x100000 - 0x10003c
[ 0.001388] Hierarchical SRCU implementation.
[ 0.001703] smp: Bringing up secondary CPUs ...
[ 0.002277] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
[ 0.002282] CPU1: Spectre v2: using BPIALL workaround
[ 0.002364] smp: Brought up 1 node, 2 CPUs
[ 0.002373] SMP: Total of 2 processors activated (2800.00 BogoMIPS).
[ 0.002379] CPU: WARNING: CPU(s) started in wrong/inconsistent modes (primary CPU mode 0x13)
[ 0.002382] CPU: This may indicate a broken bootloader or firmware.
[ 0.004055] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[ 0.004074] futex hash table entries: 512 (order: 3, 32768 bytes)
[ 0.004203] pinctrl core: initialized pinctrl subsystem
[ 0.004443] NET: Registered protocol family 16
[ 0.005041] DMA: preallocated 256 KiB pool for atomic coherent allocations
[ 0.015037] clocksource: Switched to clocksource arm_global_timer
[ 0.015993] NET: Registered protocol family 2
[ 0.016409] TCP established hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.016426] TCP bind hash table entries: 1024 (order: 1, 8192 bytes)
[ 0.016441] TCP: Hash tables configured (established 1024 bind 1024)
[ 0.016516] UDP hash table entries: 256 (order: 1, 8192 bytes)
[ 0.016542] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
[ 0.016675] NET: Registered protocol family 1
[ 0.017380] Crashlog allocated RAM at address 0x3f00000
[ 0.017845] workingset: timestamp_bits=14 max_order=17 bucket_order=3
[ 0.020204] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 0.020214] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
[ 0.024493] bounce: pool size: 64 pages
[ 0.024512] io scheduler noop registered
[ 0.024517] io scheduler deadline registered (default)
[ 0.025346] Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled
[ 0.025884] console [ttyS0] disabled
[ 0.025940] 18000300.serial: ttyS0 at MMIO 0x18000300 (irq = 18, base_baud = 7812500) is a 16550
[ 0.519431] console [ttyS0] enabled
[ 0.523419] 18000400.serial: ttyS1 at MMIO 0x18000400 (irq = 18, base_baud = 7812500) is a 16550
[ 0.533188] nand: device found, Manufacturer ID: 0xec, Chip ID: 0xf1
[ 0.539562] nand: Samsung NAND 128MiB 3,3V 8-bit
[ 0.544209] nand: 128 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64
[ 0.551814] iproc_nand 18028000.nand: detected 128MiB total, 128KiB blocks, 2KiB pages, 16B OOB, 8-bit, BCH-4
[ 0.561766] Scanning device for bad blocks
[ 0.584436] random: fast init done
[ 0.797561] Bad eraseblock 384 at 0x000003000000
[ 0.879336] Bad eraseblock 515 at 0x000004060000
[ 1.183962] Bad eraseblock 1023 at 0x000007fe0000
[ 1.188849] 4 fixed-partitions partitions found on MTD device brcmnand.0
[ 1.195586] Creating 4 MTD partitions on "brcmnand.0":
[ 1.200747] 0x000000000000-0x000000080000 : "boot"
[ 1.206082] 0x000000080000-0x000000180000 : "nvram"
[ 1.211483] 0x000000180000-0x000000400000 : "phicomm"
[ 1.217059] 0x000000400000-0x000008000000 : "firmware"
[ 1.223847] 2 trx partitions found on MTD device firmware
[ 1.229259] Creating 2 MTD partitions on "firmware":
[ 1.234265] 0x00000000001c-0x000000400000 : "linux"
[ 1.239729] 0x000000400000-0x000007c00000 : "ubi"
[ 1.245751] bcm_iproc 18029200.spi: using bspi-mspi mode
[ 1.252076] libphy: iProc MDIO bus: probed
[ 1.256197] iproc-mdio 18003000.mdio: Broadcom iProc MDIO bus at 0xc88b7000
[ 1.263470] libphy: mdio_mux: probed
[ 1.267639] libphy: Fixed MDIO Bus: probed
[ 1.271878] bgmac_bcma: Broadcom 47xx GBit MAC driver loaded
[ 1.277875] bcma-host-soc 18000000.axi: bus0: Found chip with id 53030, rev 0x00 and package 0x00
[ 1.286843] bcma-host-soc 18000000.axi: bus0: Core 0 found: ChipCommon (manuf 0x4BF, id 0x800, rev 0x2A, class 0x0)
[ 1.297415] bcma-host-soc 18000000.axi: bus0: Core 1 found: Chipcommon B (manuf 0x4BF, id 0x50B, rev 0x05, class 0x0)
[ 1.308144] bcma-host-soc 18000000.axi: bus0: Core 2 found: DMA (manuf 0x4BF, id 0x502, rev 0x04, class 0x0)
[ 1.318127] bcma-host-soc 18000000.axi: bus0: Core 3 found: GBit MAC (manuf 0x4BF, id 0x82D, rev 0x07, class 0x0)
[ 1.328525] bcma-host-soc 18000000.axi: bus0: Core 4 found: GBit MAC (manuf 0x4BF, id 0x82D, rev 0x07, class 0x0)
[ 1.338914] bcma-host-soc 18000000.axi: bus0: Core 5 found: GBit MAC (manuf 0x4BF, id 0x82D, rev 0x07, class 0x0)
[ 1.349315] bcma-host-soc 18000000.axi: bus0: Core 6 found: GBit MAC (manuf 0x4BF, id 0x82D, rev 0x07, class 0x0)
[ 1.359680] bcma-host-soc 18000000.axi: bus0: Core 7 found: PCIe Gen 2 (manuf 0x4BF, id 0x501, rev 0x07, class 0x0)
[ 1.370210] bcma-host-soc 18000000.axi: bus0: Core 8 found: PCIe Gen 2 (manuf 0x4BF, id 0x501, rev 0x07, class 0x0)
[ 1.380763] bcma-host-soc 18000000.axi: bus0: Core 9 found: PCIe Gen 2 (manuf 0x4BF, id 0x501, rev 0x07, class 0x0)
[ 1.391320] bcma-host-soc 18000000.axi: bus0: Core 10 found: ARM Cortex A9 core (ihost) (manuf 0x4BF, id 0x510, rev 0x07, class 0x0)
[ 1.403349] bcma-host-soc 18000000.axi: bus0: Core 11 found: USB 2.0 (manuf 0x4BF, id 0x504, rev 0x07, class 0x0)
[ 1.413738] bcma-host-soc 18000000.axi: bus0: Core 12 found: USB 3.0 (manuf 0x4BF, id 0x505, rev 0x07, class 0x0)
[ 1.424118] bcma-host-soc 18000000.axi: bus0: Core 13 found: SDIO3 (manuf 0x4BF, id 0x503, rev 0x01, class 0x0)
[ 1.434324] bcma-host-soc 18000000.axi: bus0: Core 14 found: I2S (manuf 0x4BF, id 0x834, rev 0x03, class 0x0)
[ 1.444353] bcma-host-soc 18000000.axi: bus0: Core 15 found: ARM Cortex A9 JTAG (manuf 0x4BF, id 0x506, rev 0x01, class 0x0)
[ 1.455688] bcma-host-soc 18000000.axi: bus0: Core 16 found: Denali DDR2/DDR3 memory controller (manuf 0x4BF, id 0x507, rev 0x01, class 0x0)
[ 1.468419] bcma-host-soc 18000000.axi: bus0: Core 17 found: ROM (manuf 0x4BF, id 0x508, rev 0x08, class 0x0)
[ 1.478460] bcma-host-soc 18000000.axi: bus0: Core 18 found: NAND flash controller (manuf 0x4BF, id 0x509, rev 0x01, class 0x0)
[ 1.490059] bcma-host-soc 18000000.axi: bus0: Core 19 found: SPI flash controller (manuf 0x4BF, id 0x50A, rev 0x01, class 0x0)
[ 1.501498] bcma-host-soc 18000000.axi: bus0: Flash type not supported
[ 1.554427] bgmac_bcma bcma0:3: Found PHY addr: 30 (NOREGS)
[ 1.560022] bgmac_bcma bcma0:3: Support for Roboswitch not implemented
[ 1.573364] b53_common: found switch: BCM53012, rev 0
[ 1.579058] bgmac_bcma bcma0:4: Found PHY addr: 0
[ 1.583827] bgmac_bcma bcma0:4: Support for Roboswitch not implemented
[ 1.590383] bgmac_bcma bcma0:4: Invalid MAC addr: 00:00:00:00:00:00
[ 1.596667] bgmac_bcma bcma0:4: Using random MAC: b6:f0:74:14:0e:7f
[ 1.604216] bgmac_bcma bcma0:5: Found PHY addr: 0
[ 1.608948] bgmac_bcma bcma0:5: Support for Roboswitch not implemented
[ 1.615529] bgmac_bcma bcma0:5: Invalid MAC addr: 00:00:00:00:00:00
[ 1.621826] bgmac_bcma bcma0:5: Using random MAC: 9a:b5:54:c3:8c:df
[ 1.629373] bgmac_bcma bcma0:6: Unsupported core_unit 3
[ 1.634689] bgmac_bcma: probe of bcma0:6 failed with error -524
[ 1.760106] pcie_iproc_bcma bcma0:7: PHY or data link is INACTIVE!
[ 1.766306] pcie_iproc_bcma bcma0:7: no PCIe EP device detected
[ 1.772252] pcie_iproc_bcma bcma0:7: PCIe controller setup failed
[ 1.890105] pcie_iproc_bcma bcma0:8: PHY or data link is INACTIVE!
[ 1.896299] pcie_iproc_bcma bcma0:8: no PCIe EP device detected
[ 1.902236] pcie_iproc_bcma bcma0:8: PCIe controller setup failed
[ 2.020105] pcie_iproc_bcma bcma0:9: PHY or data link is INACTIVE!
[ 2.026303] pcie_iproc_bcma bcma0:9: no PCIe EP device detected
[ 2.032246] pcie_iproc_bcma bcma0:9: PCIe controller setup failed
[ 2.039125] bcm47xx-wdt bcm47xx-wdt.0: BCM47xx Watchdog Timer enabled (30 seconds, Software Timer)
[ 2.048174] bcma-host-soc 18000000.axi: bus0: Bus registered
[ 2.054513] NET: Registered protocol family 10
[ 2.059937] Segment Routing with IPv6
[ 2.063708] NET: Registered protocol family 17
[ 2.068192] 8021q: 802.1Q VLAN Support v1.8
[ 2.072431] Registering SWP/SWPB emulation handler
[ 2.079160] UBI: auto-attach mtd5
[ 2.082525] ubi0: attaching mtd5
[ 2.501101] random: crng init done
[ 2.565106] ubi0: scanning is finished
[ 2.577654] ubi0: attached mtd5 (name "ubi", size 120 MiB)
[ 2.583184] ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
[ 2.590069] ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
[ 2.596873] ubi0: VID header offset: 2048 (aligned 2048), data offset: 4096
[ 2.603851] ubi0: good PEBs: 957, bad PEBs: 3, corrupted PEBs: 0
[ 2.609870] ubi0: user volume: 2, internal volumes: 1, max. volumes count: 128
[ 2.617110] ubi0: max/mean erase counter: 1/0, WL threshold: 4096, image sequence number: 1589544648
[ 2.626265] ubi0: available PEBs: 0, total reserved PEBs: 957, PEBs reserved for bad PEB handling: 17
[ 2.635545] ubi0: background thread "ubi_bgt0d" started, PID 400
[ 2.642444] block ubiblock0_0: created from ubi0:0(rootfs)
[ 2.647966] ubiblock: device ubiblock0_0 (rootfs) set to be root filesystem
[ 2.658383] squashfs: SQUASHFS error: unable to read id index table
[ 2.664911] List of all partitions:
[ 2.668437] 1f00 512 mtdblock0
[ 2.668440] (driver?)
[ 2.675037] 1f01 1024 mtdblock1
[ 2.675039] (driver?)
[ 2.681605] 1f02 2560 mtdblock2
[ 2.681608] (driver?)
[ 2.688158] 1f03 126976 mtdblock3
[ 2.688160] (driver?)
[ 2.694722] 1f04 4095 mtdblock4
[ 2.694725] (driver?)
[ 2.701286] 1f05 122880 mtdblock5
[ 2.701292] (driver?)
[ 2.707847] fe00 55800 ubiblock0_0
[ 2.707849] (driver?)
[ 2.714581] No filesystem could mount root, tried:
[ 2.714583] squashfs
[ 2.719472]
[ 2.723244] Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(254,0)
[ 2.731703] CPU1: stopping
[ 2.734418] CPU: 1 PID: 0 Comm: swapper/1 Not tainted 4.14.180 #0
[ 2.740524] Hardware name: BCM5301X
[ 2.744015] Backtrace:
[ 2.746477] [<c0105848>] (dump_backtrace) from [<c0105b40>] (show_stack+0x18/0x1c)
[ 2.754063] r7:00000001 r6:60000193 r5:00000000 r4:c081fb44
[ 2.759744] [<c0105b28>] (show_stack) from [<c050e71c>] (dump_stack+0x9c/0xb0)
[ 2.766984] [<c050e680>] (dump_stack) from [<c010853c>] (handle_IPI+0xec/0x198)
[ 2.774307] r7:00000001 r6:00000000 r5:c7853f38 r4:c08207f8
[ 2.779975] [<c0108450>] (handle_IPI) from [<c01014dc>] (gic_handle_irq+0x94/0x98)
[ 2.787563] r7:c8802100 r6:c880210c r5:c0813da0 r4:c0803f0c
[ 2.793231] [<c0101448>] (gic_handle_irq) from [<c010684c>] (__irq_svc+0x6c/0x90)
[ 2.800731] Exception stack(0xc7853f38 to 0xc7853f80)
[ 2.805788] 3f20: 00000000 00001424
[ 2.813981] 3f40: 0622a000 c010f0a0 ffffe000 c0803c78 c0803c28 c080b2ae c05c9c50 413fc090
[ 2.822181] 3f60: 00000000 c7853f94 c7853f98 c7853f88 c0103188 c010318c 60000013 ffffffff
[ 2.830379] r9:c7852000 r8:c05c9c50 r7:c7853f6c r6:ffffffff r5:60000013 r4:c010318c
[ 2.838138] [<c0103150>] (arch_cpu_idle) from [<c0527980>] (default_idle_call+0x30/0x34)
[ 2.846250] [<c0527950>] (default_idle_call) from [<c014b9d0>] (do_idle+0xc0/0x124)
[ 2.853923] [<c014b910>] (do_idle) from [<c014bc9c>] (cpu_startup_entry+0x20/0x24)
[ 2.861505] r9:413fc090 r8:0000406a r7:c0820800 r6:10c0387d r5:00000001 r4:00000085
[ 2.869270] [<c014bc7c>] (cpu_startup_entry) from [<c01081d0>] (secondary_start_kernel+0x158/0x160)
[ 2.878340] [<c0108078>] (secondary_start_kernel) from [<001017cc>] (0x1017cc)
[ 2.885578] r5:00000051 r4:0784806a
[ 2.889651] Rebooting in 1 seconds..
Digital core power voltage set to 1.05V
Decompressing...done
Digital core power voltage set to 1.05V
SHMOO VER 1.13
PKID07DC06011801080000000000001A103F01000000
S3000021F
000017D0
|
|
简体中文
繁體中文
English
日本語
Deutsch
한국 사람
بالعربية
TÜRKÇE
português
คนไทย
IP卡
狗仔卡
置顶卡
沉默卡
喧嚣卡
顶贴卡
显身卡
