|
本帖最后由 sunsuper 于 2021-5-28 12:32 编辑
用TTL线连接RT-N18U了,
后面怎么继续刷RT-AC68U???
go load
Loader:raw Filesys:tftp Dev:eth0 File:: Options : (null)
Loading: TFTP Server.
..tftp retry wait 0
Failed.
Could not load :: Interrupted
CFE> ^C
CFE> ^C
CFE> ^C
CFE> ^C
CFE> ^C
CFE> ^C
CFE> ^C
CFE> help
Available commands:
nvram NVRAM utility.
reboot Reboot.
flash Update a flash memory device
batch Load a batch file into memory and execute it
go Verify and boot OS image.
boot Load an executable file into memory and execute it
load Load an executable file into memory without executing it
save Save a region of memory to a remote file via TFTP
ping Ping a remote IP host.
arp Display or modify the ARP Table
ifconfig Configure the Ethernet interface
show clocks Show current values of the clocks.
show devices Display information about the installed devices.
help Obtain help for CFE commands
For more information about a command, enter 'help command-name'
*** command status = 0
CFE>
我的恩山、我的无线 The best wifi forum is right here. |
本帖子中包含更多资源
您需要 登录 才可以下载或查看,没有账号?立即注册
×
|