找回密码
 立即注册

QQ登录

只需一步,快速开始

搜索
广告投放联系QQ68610888
查看: 757|回复: 12

[k3] K3 变砖了,大神们看看这还有救吗?已经解决。

[复制链接]
本帖最后由 5210402 于 2023-11-10 19:58 编辑

.... 5280704 bytes read
Entry at 0x00008000
Starting program at 0x00008000
console [ttyS0] enabled, bootconsole disabled
serial8250.0: ttyS1 at MMIO 0x18000400 (irq = 117) is a 16550
brd: module loaded
loop: module loaded
pflash: found no supported devices
bcmsflash: found no supported devices
Boot partition size = 524288(0x80000)
lookup_nflash_rootfs_offset: offset = 0x400000
nflash: squash filesystem with lzma found at block 48
Creating 8 MTD partitions on "nflash":
0x000000000000-0x000000080000 : "boot"
0x000000080000-0x000000180000 : "nvram"
0x000000180000-0x000000280000 : "nvram_back"
0x000000280000-0x0000002c0000 : "res_info"
0x000000300000-0x000000320000 : "pro_info"
0x000000380000-0x0000003a0000 : "dev_info"
0x000000400000-0x000003000000 : "linux"
0x00000061e210-0x000003000000 : "rootfs"
PPP generic driver version 2.4.2
NET: Registered protocol family 24
usbmon: debugfs is not available
usbcore: registered new interface driver usblp
Initializing USB Mass Storage driver...
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
u32 classifier
    Actions configured
Netfilter messages via NETLINK v0.30.
nf_conntrack version 0.5.0 (8035 buckets, 32140 max)
ctnetlink v0.93: registering with nfnetlink.
xt_time: kernel timezone is -0000
ip_tables: (C) 2000-2006 Netfilter Core Team
TCP cubic registered
NET: Registered protocol family 10
ip6_tables: (C) 2000-2006 Netfilter Core Team
IPv6 over IPv4 tunneling driver
NET: Registered protocol family 17
802.1Q VLAN Support v1.8 Ben Greear <greearb@candelatech.com>
All bugs added by David S. Miller <davem@redhat.com>
init_module:price_compare!
creat nlsock ok!
Unable to handle kernel paging request at virtual address ffffffff
pgd = 80004000
[ffffffff] *pgd=5fffe021, *pte=00000000, *ppte=00000000
Internal error: Oops: 17 [#1] PREEMPT SMP
last sysfs file:
Modules linked in:
CPU: 0    Not tainted  (2.6.36.4brcmarm #1)
PC is at kmem_cache_alloc+0x54/0xbc
LR is at device_create_vargs+0x2c/0xb8
pc : [<8049029c>]    lr : [<80219c84>]    psr: a0000093
sp : 9f82ff20  ip : 88407838  fp : 80541c00
r10: 80512508  r9 : 804f1e0c  r8 : 00000000
r7 : ffffffff  r6 : 000080d0  r5 : 80000013  r4 : 804ee218
r3 : 00000000  r2 : 80041838  r1 : 083c6000  r0 : 804ee218
Flags: NzCv  IRQs off  FIQs on  Mode SVC_32  ISA ARM  Segment kernel
Control: 10c53c7d  Table: 4000404a  DAC: 00000017
Process swapper (pid: 1, stack limit = 0x9f82e270)
Stack: (0x9f82ff20 to 0x9f830000)
ff20: 804f1e0c 80512508 9faaa250 9fa05540 00000000 00000000 0fc00000 80219c84
ff40: 80523fc0 804f1e0c 00000000 80514000 804f1230 80219d30 8044fb54 9f82ff74
ff60: 804f1e0c 9f82ff74 80514000 80053e28 8044fb54 9f82ff84 9f82e000 80027750
ff80: 8048e54c 8002a61c 80512000 9f82e000 00000000 80053c2c 00000000 00000000
ffa0: 00000000 800435bc 00000000 80110000 00000002 804f3d58 00000100 803a9e1c
ffc0: 00000002 8002a61c 8002a650 803a9e1c 00000002 8053cf24 00000000 800092e8
ffe0: 00000000 80009194 80044b8c 00000013 00000000 80044b8c ffffffff ffffffff
[<8049029c>] (PC is at kmem_cache_alloc+0x54/0xbc)
[<8049029c>] (kmem_cache_alloc+0x54/0xbc) from [<80219c84>] (device_create_vargs+0x2c/0xb8)
[<80219c84>] (device_create_vargs+0x2c/0xb8) from [<80219d30>] (device_create+0x20/0x28)
[<80219d30>] (device_create+0x20/0x28) from [<80053e28>] (dev_nvram_init+0x1fc/0x448)
[<80053e28>] (dev_nvram_init+0x1fc/0x448) from [<800435bc>] (do_one_initcall+0x30/0x19c)
[<800435bc>] (do_one_initcall+0x30/0x19c) from [<800092e8>] (kernel_init+0x154/0x218)
[<800092e8>] (kernel_init+0x154/0x218) from [<80044b8c>] (kernel_thread_exit+0x0/0x8)
Code: e082c001 e3570000 0a000012 e5903010 (e7973003)
---[ end trace 83b7fb833a972727 ]---
Kernel panic - not syncing: Fatal exception
[<8004a004>] (unwind_backtrace+0x0/0xf8) from [<803a5538>] (panic+0x74/0x1a0)
[<803a5538>] (panic+0x74/0x1a0) from [<800476d8>] (die+0x1a4/0x1dc)
[<800476d8>] (die+0x1a4/0x1dc) from [<8004b48c>] (__do_kernel_fault+0x64/0x84)
[<8004b48c>] (__do_kernel_fault+0x64/0x84) from [<8004b5fc>] (do_page_fault+0x150/0x1ec)
[<8004b5fc>] (do_page_fault+0x150/0x1ec) from [<800433a4>] (do_DataAbort+0x30/0x9c)
[<800433a4>] (do_DataAbort+0x30/0x9c) from [<8049f74c>] (__dabt_svc+0x4c/0x60)
Exception stack(0x9f82fed8 to 0x9f82ff20)
fec0:                                                       804ee218 083c6000
fee0: 80041838 00000000 804ee218 80000013 000080d0 ffffffff 00000000 804f1e0c
ff00: 80512508 80541c00 88407838 9f82ff20 80219c84 8049029c a0000093 ffffffff
[<8049f74c>] (__dabt_svc+0x4c/0x60) from [<8049029c>] (kmem_cache_alloc+0x54/0xbc)
[<8049029c>] (kmem_cache_alloc+0x54/0xbc) from [<80219c84>] (device_create_vargs+0x2c/0xb8)
[<80219c84>] (device_create_vargs+0x2c/0xb8) from [<80219d30>] (device_create+0x20/0x28)
[<80219d30>] (device_create+0x20/0x28) from [<80053e28>] (dev_nvram_init+0x1fc/0x448)
[<80053e28>] (dev_nvram_init+0x1fc/0x448) from [<800435bc>] (do_one_initcall+0x30/0x19c)
[<800435bc>] (do_one_initcall+0x30/0x19c) from [<800092e8>] (kernel_init+0x154/0x218)
[<800092e8>] (kernel_init+0x154/0x218) from [<80044b8c>] (kernel_thread_exit+0x0/0x8)
CPU1: stopping
[<8004a004>] (unwind_backtrace+0x0/0xf8) from [<80043334>] (do_IPI+0x114/0x154)
[<80043334>] (do_IPI+0x114/0x154) from [<8049f7c0>] (__irq_svc+0x60/0x138)
Exception stack(0x9f84df98 to 0x9f84dfe0)
df80:                                                       00000000 9f9e4f00
dfa0: 9f84dfe0 00000000 9f84c000 805120a8 804f0b90 80512214 40000000 413fc090
dfc0: 0000001f 00000000 00000000 9f84dfe0 80044be4 80044be8 60000013 ffffffff
[<8049f7c0>] (__irq_svc+0x60/0x138) from [<80044be8>] (default_idle+0x24/0x28)
[<80044be8>] (default_idle+0x24/0x28) from [<80044d88>] (cpu_idle+0x70/0xa4)
[<80044d88>] (cpu_idle+0x70/0xa4) from [<40008224>] (0x40008224)
Rebooting in 3 seconds..Digital core power voltage set to 1.05V
Decompressing...done


CFE version 7.14.164.303 (r666427) based on BBP 1.0.37 for BCM947XX (32bit,SP,)
Build Date: Thu Oct  6 08:49:26 CST 2022 (dong@ubuntu)
Copyright (C) 2000-2008 Broadcom Corporation.

Init Arena
Init Devs.
Boot partition size = 262144(0x40000)
DDR Clock: 400 MHz
Warning: invalid DDR setting of 0 MHz ignored. DDR frequency will be set to 400 MHz.
CPU type 0x0: 800MHz
Tot mem: 524288 KBytes

CFE mem:    0x00F00000 - 0x017C8658 (9209432)
Data:       0x00F5080C - 0x00F50D50 (1348)
BSS:        0x00F50D60 - 0x00FC6658 (481528)
Heap:       0x00FC6658 - 0x017C6658 (8388608)
Stack:      0x017C6658 - 0x017C8658 (8192)
Text:       0x00F00000 - 0x00F46A68 (289384)

Null Rescue Flag.
Hello!! Enter Rescue Mode: (by Force)

CFE> flash -noheader 192.168.2.100:K3_V21.6.8.46_tb.bin nflash0.trx
Reading 192.168.2.100:K3_V21.6.8.46_tb.bin:
TFTP Client.
Failed.: Timeout occured
*** command status = -21
CFE>

-------------------------------------------------------------------------------------------------
已解决,谢谢大家,特别鸣谢:@spark1001  

我的恩山、我的无线 The best wifi forum is right here.
这是进CFE了,重新刷机即可

点评

怎么刷?按教程,直接命令刷。失败。 CFE> flash -noheader 192.168.2.100:K3_V21.6.8.46_tb.bin nflash0.trx Reading 192.168.2.100:K3_V21.6.8.46_tb.bin: TFTP Client. Failed.: Timeout occured *** command sta  详情 回复 发表于 2023-11-9 21:58
我的恩山、我的无线 The best wifi forum is right here.
回复

使用道具 举报

 楼主| | 显示全部楼层
zhuoling1234 发表于 2023-11-9 21:45
这是进CFE了,重新刷机即可

怎么刷?按教程,直接命令刷。失败。
CFE> flash -noheader 192.168.2.100:K3_V21.6.8.46_tb.bin nflash0.trx
Reading 192.168.2.100:K3_V21.6.8.46_tb.bin:
TFTP Client.
Failed.: Timeout occured
*** command status = -21

点评

命令错了,先:flash -erase nflash0.brcmnand 再:flash -noheader 192.168.2.100:K3_V21.6.8.46_tb.bin nflash0.brcmnand  详情 回复 发表于 2023-11-9 23:23
我的恩山、我的无线 The best wifi forum is right here.
回复

使用道具 举报

来自手机 | 显示全部楼层
直接刷就行,这没有坏啊
我的恩山、我的无线 The best wifi forum is right here.
回复

使用道具 举报

5210402 发表于 2023-11-9 21:58
怎么刷?按教程,直接命令刷。失败。
CFE> flash -noheader 192.168.2.100:K3_V21.6.8.46_tb.bin nflash0 ...

命令错了,先:flash -erase nflash0.brcmnand
再:flash -noheader 192.168.2.100:K3_V21.6.8.46_tb.bin nflash0.brcmnand

点评

好的 我试试,谢谢  详情 回复 发表于 2023-11-10 13:12
我的恩山、我的无线 The best wifi forum is right here.
回复

使用道具 举报

我看ttl没有ip输出重置一下试试看先输入nvram erase再刷写
我的恩山、我的无线 The best wifi forum is right here.
回复

使用道具 举报

有救,正常刷机就行了,出现这个报错,要么是你的ip没设好(尽量别用100),要么就是防火墙没关,试试吧,不行的话可以远程帮你刷

点评

是的 他没出IP 也ping不通  详情 回复 发表于 2023-11-10 13:13
我的恩山、我的无线 The best wifi forum is right here.
回复

使用道具 举报

 楼主| | 显示全部楼层
zhuoling1234 发表于 2023-11-9 23:23
命令错了,先:flash -erase nflash0.brcmnand
再:flash -noheader 192.168.2.100:K3_V21.6.8.46_tb.bin ...

好的 我试试,谢谢
我的恩山、我的无线 The best wifi forum is right here.
回复

使用道具 举报

 楼主| | 显示全部楼层
spark1001 发表于 2023-11-10 08:09
有救,正常刷机就行了,出现这个报错,要么是你的ip没设好(尽量别用100),要么就是防火墙没关,试试吧, ...

是的 他没出IP  也ping不通

点评

啊对,刚注意到,你的cfe里面没ip,需要手动给它写一个  详情 回复 发表于 2023-11-10 13:36
我的恩山、我的无线 The best wifi forum is right here.
回复

使用道具 举报

5210402 发表于 2023-11-10 13:13
是的 他没出IP  也ping不通

啊对,刚注意到,你的cfe里面没ip,需要手动给它写一个

点评

怎么写?  详情 回复 发表于 2023-11-10 13:41
我的恩山、我的无线 The best wifi forum is right here.
回复

使用道具 举报

 楼主| | 显示全部楼层
spark1001 发表于 2023-11-10 13:36
啊对,刚注意到,你的cfe里面没ip,需要手动给它写一个

怎么写?

点评

还不行就看看这个帖子 https://www.right.com.cn/forum/thread-4029782-1-1.html  详情 回复 发表于 2023-11-10 13:55
先试一下nvram erase,然后重启,看看能不能出来  详情 回复 发表于 2023-11-10 13:55
我的恩山、我的无线 The best wifi forum is right here.
回复

使用道具 举报


先试一下nvram erase,然后重启,看看能不能出来
我的恩山、我的无线 The best wifi forum is right here.
回复

使用道具 举报

我的恩山、我的无线 The best wifi forum is right here.
回复

使用道具 举报

您需要登录后才可以回帖 登录 | 立即注册

本版积分规则

有疑问请添加管理员QQ86788181|手机版|小黑屋|Archiver|恩山无线论坛(常州市恩山计算机开发有限公司版权所有) ( 苏ICP备05084872号 )

GMT+8, 2024-4-27 21:01

Powered by Discuz! X3.5

© 2001-2024 Discuz! Team.

| 江苏省互联网有害信息举报中心 举报信箱:js12377 | @jischina.com.cn 举报电话:025-88802724 本站不良内容举报信箱:68610888@qq.com 举报电话:0519-86695797

快速回复 返回顶部 返回列表