教程 让华硕N16路由摇身变成N66 原厂支持5G频段 再次升级到450M网卡成功！！

Do***

有台N16，可以帮忙改装吗？楼主。

h99***

大神啊   我的n16  2.4g的wifi模块挂掉了 怎么办啊~~~~~~~~~~
开机没有wifi信号 中继也搜不到信号

xxq***

照着版主的改了一下
但是还是没有搜到5g 的wifi 信号

网卡用的是全高卡  BCM94322MC pci-e

版主有空帮忙看一下吗








CFE version 1.0.37 for BCM947XX (32bit,SP,LE)
Build Date: 57 16:47:24 CST 2009 (root@localhost.localdomain)
Copyright (C) 2000-2008 Broadcom Corporation.

Init Arena
Init Devs.
Boot partition size = 262144(0x40000)
et0: Broadcom BCM47XX 10/100/1000 Mbps Ethernet Controller 5.10.56.3
CPU type 0x19740: 480MHz
Tot mem: 131072 KBytes

CFE mem:    0x80700000 - 0x8079B310 (635664)
Data:       0x80731B30 - 0x80734880 (11600)
BSS:        0x80734880 - 0x80735310 (2704)
Heap:       0x80735310 - 0x80799310 (409600)
Stack:      0x80799310 - 0x8079B310 (8192)
Text:       0x80700000 - 0x80731B30 (203568)

Device eth0:  hwaddr BC-AE-C5-C4-1C-11, ipaddr 192.168.1.1, mask 255.255.255.0
        gateway not set, nameserver not set
Null Rescue Flag.
Loader:raw Filesys:tftp Dev:eth0 File:: Optionsnull)
Loading: TFTP Server.
Failed.
Could not load :: Timeout occured
Loader:raw Filesys:raw Dev:flash0.os File: Optionsnull)
Loading: .. 5100 bytes read
Entry at 0x80001000
Starting program at 0x80001000
Linux version 2.6.22.19 (root@asus) (gcc version 4.2.4) #1 Mon Nov 5 11:11:15 CST 2012
CPU revision is: 00019740
Determined physical RAM map:
memory: 07fff000 @ 00000000 (usable)
Built 1 zonelists.  Total pages: 32512
Kernel command line: root=/dev/mtdblock2 noinitrd console=ttyS0,115200
Primary instruction cache 32kB, physically tagged, 4-way, linesize 32 bytes.
Primary data cache 32kB, 4-way, linesize 32 bytes.
Synthesized TLB refill handler (20 instructions).
Synthesized TLB load handler fastpath (32 instructions).
Synthesized TLB store handler fastpath (32 instructions).
Synthesized TLB modify handler fastpath (31 instructions).
PID hash table entries: 512 (order: 9, 2048 bytes)
CPU: BCM4716 rev 1 pkg 10 at 480 MHz
Using 240.000 MHz high precision timer.
console [ttyS0] enabled
Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
Memory: 126192k/131068k available (2440k kernel code, 4732k reserved, 492k data, 192k init, 0k highmem)
Mount-cache hash table entries: 512
NET: Registered protocol family 16
PCI: Using membase 8000000
PCI: Initializing host
PCI: Reset RC
PCI: no core
PCI: Fixing up bus 0
PCI/PCIe coreunit 0 is set to bus 1.
PCI: Fixing up bridge
PCI: Fixing up bridge
PCI: Enabling device 0000:01:00.1 (0004 -> 0006)
PCI: Fixing up bus 1
NET: Registered protocol family 2
Time: MIPS clocksource has been installed.
IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
TCP established hash table entries: 4096 (order: 3, 32768 bytes)
TCP bind hash table entries: 4096 (order: 2, 16384 bytes)
TCP: Hash tables configured (established 4096 bind 4096)
TCP reno registered
squashfs: version 3.2-r2 (2007/01/15) Phillip Lougher
io scheduler noop registered (default)
HDLC line discipline: version $Revision: 4.8 $, maxframe=4096
N_HDLC line discipline registered.
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled
serial8250: ttyS0 at MMIO 0xb8000300 (irq = 8) is a 16550A
PPP generic driver version 2.4.2
MPPE/MPPC encryption/compression module registered
NET: Registered protocol family 24
PPPoL2TP kernel driver, V0.18.3
PPTP driver version 0.8.5
Physically mapped flash: Found 1 x16 devices at 0x0 in 8-bit bank
Amd/Fujitsu Extended Query Table at 0x0040
Physically mapped flash: CFI does not contain boot bank location. Assuming top.
number of CFI chips: 1
cfi_cmdset_0002: Disabling erase-suspend-program due to code brokenness.
Flash device: 0x2000000 at 0x1c000000
Creating 5 MTD partitions on "hysically mapped flash":
0x00000000-0x00040000 : "pmon"
0x00040000-0x01fe0000 : "linux"
0x00167db0-0x017a0000 : "rootfs"
0x01fe0000-0x02000000 : "nvram"
0x017c0000-0x01fe0000 : "jffs2"
Found an  serial flash with 0 0KB blocks; total size 0MB
sflash: found no supported devices
dev_nvram_init: _nvram_init
_nvram_init: allocat header: 2280652800, size= 65536
sdhci: Secure Digital Host Controller Interface driver
sdhci: Copyright(c) Pierre Ossman
u32 classifier
    OLD policer on
Netfilter messages via NETLINK v0.30.
nf_conntrack version 0.5.0 (1024 buckets, 8192 max)
ipt_time loading
ip_tables: (C) 2000-2006 Netfilter Core Team
net/ipv4/netfilter/tomato_ct.c [Nov  5 2012 11:09:43]
NET: Registered protocol family 1
NET: Registered protocol family 10
ip6_tables: (C) 2000-2006 Netfilter Core Team
NET: Registered protocol family 17
802.1Q VLAN Support v1.8 Ben Greear <greearb@candelatech.com>
All bugs added by David S. Miller <davem@redhat.com>
VFS: Mounted root (squashfs filesystem) readonly.
Freeing unused kernel memory: 192k freed
Warning: unable to open an initial console.
block hotplug INTERFACE=(null) ACTION=add USBPORT=(null) HOST=(null) DEVICE=(null)
block hotplug INTERFACE=(null) ACTION=add USBPORT=(null) HOST=(null) DEVICE=(null)
block hotplug INTERFACE=(null) ACTION=add USBPORT=(null) HOST=(null) DEVICE=(null)
block hotplug INTERFACE=(null) ACTION=add USBPORT=(null) HOST=(null) DEVICE=(null)
hotplug net INTERFACE=lo ACTION=add
block hotplug INTERFACE=(null) ACTION=add USBPORT=(null) HOST=(null) DEVICE=(null)
hotplug net INTERFACE=lo ACTION=add
set_action 0
[1:init_nvram +5] init_nvram for 6
ctf: module license 'Proprietary' taints kernel.
et_module_init: passivemode set to 0x0
eth0: Broadcom BCM47XX 10/100/1000 Mbps Ethernet Controller 5.100.138.20
hotplug net INTERFACE=eth0 ACTION=add
wl_module_init: passivemode set to 0x0
eth1: Broadcom BCM4329 802.11 Wireless Controller 5.100.138.20
PCI: Enabling device 0000:01:01.0 (0000 -> 0002)
eth2: Broadcom BCM432b 802.11 Wireless Controller 5.100.138.20
hotplug net INTERFACE=eth1 ACTION=add
hotplug net INTERFACE=eth2 ACTION=add
/ # [1:init_main +8] main loop signal/state=17
start_logger:
start_usb
_ifconfig: name=eth0 flags=IFUP addr=(null) netmask=(null)
start_lan 872
update_lan_state(lan_, 0, 0)
start_lan: setting up the bridge br0
hotplug net INTERFACE=vlan1 ACTION=add
hotplug net INTERFACE=br0 ACTION=add
_ifconfig: name=vlan1 flags=IFUP addr=(null) netmask=(null)
start_lan: setting MAC of br0 bridge to BC:AE:C5:C4:1C:11
_ifconfig: name=eth1 flags=IFUP addr=(null) netmask=(null)
generate_wl_para(0x07b3): unit 0 subunit -1
generate_wl_para(0x0929): bw: 1
generate_wl_para(0x092e): channel: 0
generate_wl_para(0x092f): nbw_cap: 1
generate_wl_para(0x0930): nctrlsb: lower
generate_wl_para(0x0932): obss_coex: 1
generate_wl_para(0x07b3): unit 0 subunit 1
generate_wl_para(0x07b3): unit 0 subunit 2
generate_wl_para(0x07b3): unit 0 subunit 3
wlconf(0x00e6): unit: 0, txpower: 80
_ifconfig: name=eth2 flags=IFUP addr=(null) netmask=(null)
generate_wl_para(0x07b3): unit 1 subunit -1
generate_wl_para(0x0929): bw: 1
generate_wl_para(0x092e): channel: 0
generate_wl_para(0x092f): nbw_cap: 1
generate_wl_para(0x0930): nctrlsb: lower
generate_wl_para(0x0932): obss_coex: 1
generate_wl_para(0x07b3): unit 1 subunit 1
generate_wl_para(0x07b3): unit 1 subunit 2
generate_wl_para(0x07b3): unit 1 subunit 3
wlconf(0x00e6): unit: 1, txpower: 80
_ifconfig: name=br0 flags=IFUP addr=192.168.1.1 netmask=255.255.255.0
_ifconfig: name=lo flags=IFUP addr=127.0.0.1 netmask=255.0.0.0
route_manip: cmd=ADD name=lo addr=127.0.0.0 netmask=255.0.0.0 gateway=0.0.0.0 metric=0
update_lan_state(lan_, 2, 0)
stop_nat_rules: apply the redirect_rules!
# wanduck: nvram changed: x_Setting=1, link_modem=0.
# wanduck: Got LAN(-1) information:

# Enable direct rule
start_lan 1215
start_wan: start_wan_if(0)!
start_wan_if(0)
update_wan_state(wan0_, 0, 0)
convert_wan_nvram(wan0_)
start_auth:: done
update_wan_state(wan0_, 1, 0)
start_wan_if(): End.
start_wan: start_wan_if(1)!
start_wan_if(1)
update_wan_state(wan1_, 0, 0)
No USB Modem!
udhcpc_wan:: deconfig
_ifconfig: name=eth0 flags=IFUP addr=0.0.0.0 netmask=(null)
wan_down(eth0)
wan_down(eth0): .
stop_auth:: done
route_manip: cmd=DEL name=eth0 addr=0.0.0.0 netmask=0.0.0.0 gateway=0.0.0.0 metric=0
update_wan_state(wan0_, 3, 0)
update_wan_state(wan0_, 4, 3)
udhcpc:: deconfig done
start_services  2424
[1:start_dnsmasq +12] begin
[1:start_dnsmasq +12] end
decomp: fname=/var/lib/misc/rstats-speed.gz
decomp: gzip -dc /var/lib/misc/rstats-speed.gz > /var/tmp/rstats-uncomp != 0
load: speed_count = 0
load: read source= save_path=
load_history: fname=/var/lib/misc/rstats-history.gz
decomp: fname=/var/lib/misc/rstats-history.gz
TZ watchdog
decomp: gzip -dc /var/lib/misc/rstats-history.gz > /var/tmp/rstats-uncomp != 0
decomp: fname=/var/lib/misc/rstats-history.gz
decomp: gzip -dc /var/lib/misc/rstats-history.gz > /var/tmp/rstats-uncomp != 0
load_history: load failed
[1:start_upnp +13] config 5
start_pptpd: getpid= 1
disk_monitor: starting...
disk_monitor: Finish without setting the running time!
U2EC starting ...
[1:init_main +13] main loop signal/state=14
udhcpc_wan:: leasefail

/ #
/ # ifconfig
br0        Link encap:Ethernet  HWaddr 00:21:00:6B:B6:6B  
           inet addr:192.168.1.1  Bcast:192.168.1.255  Mask:255.255.255.0
           UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
           RX packets:36 errors:0 dropped:0 overruns:0 frame:0
           TX packets:267 errors:0 dropped:0 overruns:0 carrier:0
           collisions:0 txqueuelen:0
           RX bytes:6583 (6.4 KiB)  TX bytes:19597 (19.1 KiB)

eth0       Link encap:Ethernet  HWaddr BC:AE:C5:C4:1C:11  
           UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
           RX packets:0 errors:0 dropped:0 overruns:0 frame:0
           TX packets:277 errors:0 dropped:0 overruns:0 carrier:0
           collisions:0 txqueuelen:1000
           RX bytes:0 (0.0 B)  TX bytes:22017 (21.5 KiB)
           Interrupt:4 Base address:0x2000

eth1       Link encap:Ethernet  HWaddr BC:AE:C5:C4:1C:11  
           UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
           RX packets:0 errors:0 dropped:0 overruns:0 frame:0
           TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
           collisions:0 txqueuelen:1000
           RX bytes:0 (0.0 B)  TX bytes:0 (0.0 B)
           Interrupt:3 Base address:0x1000

eth2       Link encap:Ethernet  HWaddr 00:21:00:6B:B6:6B  
           UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
           RX packets:0 errors:0 dropped:0 overruns:0 frame:0
           TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
           collisions:0 txqueuelen:1000
           RX bytes:0 (0.0 B)  TX bytes:0 (0.0 B)
           Interrupt:6 Base address:0x8000

lo         Link encapocal Loopback  
           inet addr:127.0.0.1  Mask:255.0.0.0
           UP LOOPBACK RUNNING MULTICAST  MTU:16436  Metric:1
           RX packets:36 errors:0 dropped:0 overruns:0 frame:0
           TX packets:36 errors:0 dropped:0 overruns:0 carrier:0
           collisions:0 txqueuelen:0
           RX bytes:8671 (8.4 KiB)  TX bytes:8671 (8.4 KiB)

vlan1      Link encap:Ethernet  HWaddr BC:AE:C5:C4:1C:11  
           UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
           RX packets:0 errors:0 dropped:0 overruns:0 frame:0
           TX packets:274 errors:0 dropped:0 overruns:0 carrier:0
           collisions:0 txqueuelen:0
           RX bytes:0 (0.0 B)  TX bytes:21057 (20.5 KiB)

/ # udhcpc_wan:: leasefail
udhcpc_wan:: leasefail
udhcpc_wan:: leasefail
udhcpc_wan:: leasefail
udhcpc_wan:: leasefail
udhcpc_wan:: leasefail
udhcpc_wan:: leasefail
udhcpc_wan:: leasefail
udhcpc_wan:: leasefail
udhcpc_wan:: leasefail
[1:init_main +320] main loop signal/state=14
udhcpc_wan:: leasefail
udhcpc_wan:: leasefail
udhcpc_wan:: leasefail
udhcpc_wan:: leasefail
udhcpc_wan:: leasefail
udhcpc_wan:: leasefail

vin359***

看看，学习了

271***

前来学习...........

zcl***

甚叼。。。。甚叼。。。。。。厉害。。。

csz***

这也可以…论坛高人很多啊！

a50***

改造的很全面啊！帮顶了!

ss6***

大神啊。。

739***

好技术 牛逼

tuyua***

求支持5G的 固件

1394***

版主  这个网口的灯是怎么实现的啊

zns***

你应该开个淘宝店专门做这个，挣个外快

kaina***

可 以 考 虑 了