|
Digital core power voltage set to 1.05V
Decompressing...done
Digital core power voltage set to 1.05V
SHMOO VER 1.13
PKID07DC06011801080000000000001A103F01000000
S30000203
00001630
RDLYW0 00000004
RDENW0 00000037
RDQSW0
0000000000111111111122222222223333333333444444444455555555556666
0123456789012345678901234567890123456789012345678901234567890123
00 ---------+++++++++++++++++++++++++X++++++++++++++++++++++++-----
01 ------------++++++++++++++++++++++++++X+++++++++++++++++++++++++
02 ----------+++++++++++++++++++++++++++X+++++++++++++++++++++++++-
03 --------++++++++++++++++++++++++++X+++++++++++++++++++++++++----
04 ----++++++++++++++++++++++++X+++++++++++++++++++++++------------
05 -----------++++++++++++++++++++++++++X++++++++++++++++++++++++--
06 -----+++++++++++++++++++++++++X+++++++++++++++++++++++++--------
07 ----------+++++++++++++++++++++++++++X++++++++++++++++++++++++--
08 ----++++++++++++++++++++++++++X++++++++++++++++++++++++++-------
09 -------+++++++++++++++++++++++++X++++++++++++++++++++++++-------
10 --------++++++++++++++++++++++++++X++++++++++++++++++++++++++---
11 ---------++++++++++++++++++++++++X++++++++++++++++++++++++------
12 ---+++++++++++++++++++++++++X++++++++++++++++++++++++-----------
13 -----+++++++++++++++++++++++++X++++++++++++++++++++++++---------
14 -----++++++++++++++++++++++++++X++++++++++++++++++++++++++------
15 -----+++++++++++++++++++++++++X+++++++++++++++++++++++++--------
PW0
0000000000111111111122222222223333333333444444444455555555556666
0123456789012345678901234567890123456789012345678901234567890123
00 --++++++++++++++++++++++++++++X++++++++++++++++++++++++++++-----
01 ----++++++++++++++++++++++++++++++X+++++++++++++++++++++++++++++
02 ---++++++++++++++++++++++++++++++X+++++++++++++++++++++++++++++-
03 -+++++++++++++++++++++++++++++X+++++++++++++++++++++++++++++----
04 ++++++++++++++++++++++++++X+++++++++++++++++++++++++------------
05 ----++++++++++++++++++++++++++++++X+++++++++++++++++++++++++++--
06 ++++++++++++++++++++++++++++X++++++++++++++++++++++++++++-------
07 ---++++++++++++++++++++++++++++++X++++++++++++++++++++++++++++--
08 ++++++++++++++++++++++++++++X++++++++++++++++++++++++++++-------
09 ++++++++++++++++++++++++++++X++++++++++++++++++++++++++++-------
10 -++++++++++++++++++++++++++++++X+++++++++++++++++++++++++++++---
11 -++++++++++++++++++++++++++++X+++++++++++++++++++++++++++-------
12 ++++++++++++++++++++++++++X++++++++++++++++++++++++++-----------
13 +++++++++++++++++++++++++++X+++++++++++++++++++++++++++---------
14 ++++++++++++++++++++++++++++X++++++++++++++++++++++++++++-------
15 +++++++++++++++++++++++++++++X++++++++++++++++++++++++++++------
NW0
0000000000111111111122222222223333333333444444444455555555556666
0123456789012345678901234567890123456789012345678901234567890123
00 ---------++++++++++++++++++++++++++X+++++++++++++++++++++++++---
01 -----------++++++++++++++++++++++++++X++++++++++++++++++++++++++
02 ----------+++++++++++++++++++++++++++X++++++++++++++++++++++++++
03 -------++++++++++++++++++++++++++++X++++++++++++++++++++++++++--
04 ----++++++++++++++++++++++++++X+++++++++++++++++++++++++--------
05 -----------++++++++++++++++++++++++++X+++++++++++++++++++++++++-
06 -----++++++++++++++++++++++++++X++++++++++++++++++++++++++------
07 -----------++++++++++++++++++++++++++X+++++++++++++++++++++++++-
08 ----+++++++++++++++++++++++++++X++++++++++++++++++++++++++------
09 -------+++++++++++++++++++++++++X+++++++++++++++++++++++++------
10 -------+++++++++++++++++++++++++++X++++++++++++++++++++++++++---
11 ---------+++++++++++++++++++++++++X+++++++++++++++++++++++++----
12 ----+++++++++++++++++++++++++X++++++++++++++++++++++++----------
13 ------++++++++++++++++++++++++X++++++++++++++++++++++++---------
14 -----++++++++++++++++++++++++++X+++++++++++++++++++++++++-------
15 ------+++++++++++++++++++++++++X++++++++++++++++++++++++--------
WRDQW0
0000000000111111111122222222223333333333444444444455555555556666
0123456789012345678901234567890123456789012345678901234567890123
00 ++++++++++++++++++++++++++X+++++++++++++++++++++++++-------++++-
01 +++++++++++++++++++++++++++X+++++++++++++++++++++++++++-------+-
02 +++++++++++++++++++++++++++X++++++++++++++++++++++++++------+++-
03 +++++++++++++++++++++++++++X++++++++++++++++++++++++++------+++-
04 ++++++++++++++++++++++++X+++++++++++++++++++++++-----------++++-
05 +++++++++++++++++++++++++++X++++++++++++++++++++++++++------+++-
06 ++++++++++++++++++++++++X+++++++++++++++++++++++-----------++++-
07 ++++++++++++++++++++++++++++X+++++++++++++++++++++++++++--------
08 ++++++++++++++++++++++++X+++++++++++++++++++++++-----------++++-
09 +++++++++++++++++++++++++X+++++++++++++++++++++++++--------++++-
10 +++++++++++++++++++++++++++X++++++++++++++++++++++++++-----++++-
11 +++++++++++++++++++++++++X++++++++++++++++++++++++---------++++-
12 ++++++++++++++++++++++++X+++++++++++++++++++++++-----------++++-
13 +++++++++++++++++++++++++X++++++++++++++++++++++++---------++++-
14 +++++++++++++++++++++++++X++++++++++++++++++++++++---------++++-
15 ++++++++++++++++++++++++X++++++++++++++++++++++++----------++++-
WRDMW0 00000026
WRDMW0 00000024
ADDR
0000000000111111111122222222223333333333444444444455555555556666
0123456789012345678901234567890123456789012345678901234567890123
00 ++++++++++++++++++++++S++++++++X++++++++++++++++++++++++++++++++
Decompressing...done
CFE version 7.14.131.47 (r629548) based on BBP 1.0.37 for BCM947XX (32bit,SP,)
Build Date: Wed Aug 2 14:01:07 CST 2017 (jenkins@SOHO-OPWRT)
Copyright (C) 2000-2008 Broadcom Corporation.
Init Arena
Init Devs.
Boot partition size = 262144(0x40000)
DDR Clock: 800 MHz
Info: DDR frequency set from clkfreq=1400,*800*
et0: Broadcom BCM47XX 10/100/1000 Mbps Ethernet Controller 7.14.131.47 (r629548)
CPU type 0x0: 1400MHz
Tot mem: 524288 KBytes
CFE mem: 0x00F00000 - 0x017D1E38 (9248312)
Data: 0x00F6A210 - 0x00F6A7DC (1484)
BSS: 0x00F6A7E8 - 0x00FCFE38 (415312)
Heap: 0x00FCFE38 - 0x017CFE38 (8388608)
Stack: 0x017CFE38 - 0x017D1E38 (8192)
Text: 0x00F00000 - 0x00F5DE30 (384560)
Device eth0: hwaddr 2C-B2-1A-AC-66-C8, ipaddr 192.168.2.1, mask 255.255.255.0
gateway not set, nameserver not set
Loader:raw Filesys:raw Dev:nflash0.os File: Optionsnull)
Loading: ... 2481494 bytes read
Entry at 0x00008000
Closing network.
Starting program at 0x00008000
Uncompressing Linux... done, booting the kernel.
[ 0.000000] Booting Linux on physical CPU 0x0
[ 0.000000] Linux version 5.4.143 (hill@Hill-LPC) (gcc version 8.4.0 (OpenWrt GCC 8.4.0 r16279-5cc0535800)) #0 SMP Tue Aug 31 22:20:08 2021
[ 0.000000] CPU: ARMv7 Processor [413fc090] revision 0 (ARMv7), cr=10c5387d
[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[ 0.000000] OF: fdt: Machine model: Phicomm K3
[ 0.000000] Memory policy: Data cache writealloc
[ 0.000000] Hit pending asynchronous external abort (FSR=0x00001c06) during first unmask, this is most likely caused by a firmware/bootloader bug.
[ 0.000000] percpu: Embedded 14 pages/cpu s26764 r8192 d22388 u57344
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 130784
[ 0.000000] Kernel command line: console=ttyS0,115200
[ 0.000000] Dentry cache hash table entries: 16384 (order: 4, 65536 bytes, linear)
[ 0.000000] Inode-cache hash table entries: 8192 (order: 3, 32768 bytes, linear)
[ 0.000000] mem auto-init: stackff, heap allocff, heap freeff
[ 0.000000] Memory: 510752K/524288K available (5152K kernel code, 153K rwdata, 1276K rodata, 1024K init, 285K bss, 13536K reserved, 0K cma-reserved, 393216K highmem)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[ 0.000000] rcu: Hierarchical RCU implementation.
[ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies.
[ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16
[ 0.000000] L2C: DT/platform modifies aux control register: 0x0a130000 -> 0x3a530000
[ 0.000000] L2C-310 enabling early BRESP for Cortex-A9
[ 0.000000] L2C-310 full line of zeros enabled for Cortex-A9
[ 0.000000] L2C-310 ID prefetch enabled, offset 1 lines
[ 0.000000] L2C-310 dynamic clock gating enabled, standby mode enabled
[ 0.000000] L2C-310 cache controller enabled, 16 ways, 256 kB
[ 0.000000] L2C-310: CACHE_ID 0x410000c8, AUX_CTRL 0x7e530001
[ 0.000000] random: get_random_bytes called from start_kernel+0x2f0/0x4a0 with crng_init=0
[ 0.000007] sched_clock: 64 bits at 700MHz, resolution 1ns, wraps every 4398046511103ns
[ 0.000020] clocksource: arm_global_timer: mask: 0xffffffffffffffff max_cycles: 0xa17102bcf3, max_idle_ns: 440795224838 ns
[ 0.000038] Switching to timer-based delay loop, resolution 1ns
[ 0.000180] Calibrating delay loop (skipped), value calculated using timer frequency.. 1400.00 BogoMIPS (lpj=7000000)
[ 0.000188] pid_max: default: 32768 minimum: 301
[ 0.000282] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes, linear)
[ 0.000289] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes, linear)
[ 0.000820] CPU: Testing write buffer coherency: ok
[ 0.000851] CPU0: Spectre v2: using BPIALL workaround
[ 0.001096] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
[ 0.001456] Setting up static identity map for 0x100000 - 0x10003c
[ 0.001561] rcu: Hierarchical SRCU implementation.
[ 0.001774] smp: Bringing up secondary CPUs ...
[ 0.002337] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
[ 0.002343] CPU1: Spectre v2: using BPIALL workaround
[ 0.002422] smp: Brought up 1 node, 2 CPUs
[ 0.002430] SMP: Total of 2 processors activated (2800.00 BogoMIPS).
[ 0.002435] CPU: WARNING: CPU(s) started in wrong/inconsistent modes (primary CPU mode 0x13)
[ 0.002438] CPU: This may indicate a broken bootloader or firmware.
[ 0.003986] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[ 0.004004] futex hash table entries: 512 (order: 3, 32768 bytes, linear)
[ 0.004119] pinctrl core: initialized pinctrl subsystem
[ 0.004388] NET: Registered protocol family 16
[ 0.004997] DMA: preallocated 256 KiB pool for atomic coherent allocations
[ 0.016588] workqueue: max_active 576 requested for napi_workq is out of range, clamping between 1 and 512
[ 0.017718] clocksource: Switched to clocksource arm_global_timer
[ 0.018347] thermal_sys: Registered thermal governor 'step_wise'
[ 0.018787] NET: Registered protocol family 2
[ 0.018924] IP idents hash table entries: 2048 (order: 2, 16384 bytes, linear)
[ 0.019384] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes, linear)
[ 0.019408] TCP established hash table entries: 1024 (order: 0, 4096 bytes, linear)
[ 0.019421] TCP bind hash table entries: 1024 (order: 1, 8192 bytes, linear)
[ 0.019434] TCP: Hash tables configured (established 1024 bind 1024)
[ 0.019509] UDP hash table entries: 256 (order: 1, 8192 bytes, linear)
[ 0.019533] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear)
[ 0.019676] NET: Registered protocol family 1
[ 0.019699] PCI: CLS 0 bytes, default 64
[ 0.020845] workingset: timestamp_bits=14 max_order=17 bucket_order=3
[ 0.024652] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 0.024667] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
[ 0.025582] bounce: pool size: 64 pages
[ 0.028391] Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled
[ 0.028930] printk: console [ttyS0] disabled
[ 0.028992] 18000300.serial: ttyS0 at MMIO 0x18000300 (irq = 18, base_baud = 7812500) is a 16550
[ 0.498598] printk: console [ttyS0] enabled
[ 0.503252] 18000400.serial: ttyS1 at MMIO 0x18000400 (irq = 18, base_baud = 7812500) is a 16550
[ 0.512637] bcm2835-rng 18004000.rng: hwrng registered
[ 0.518337] nand: device found, Manufacturer ID: 0xec, Chip ID: 0xf1
[ 0.524726] nand: Samsung NAND 128MiB 3,3V 8-bit
[ 0.529356] nand: 128 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64
[ 0.536954] iproc_nand 18028000.nand: detected 128MiB total, 128KiB blocks, 2KiB pages, 16B OOB, 8-bit, BCH-4
[ 0.546901] Scanning device for bad blocks
[ 0.569477] random: fast init done
[ 0.792313] Bad eraseblock 403 at 0x000003260000
[ 0.799354] Bad eraseblock 407 at 0x0000032e0000
[ 0.804637] Bad eraseblock 408 at 0x000003300000
[ 0.809905] Bad eraseblock 409 at 0x000003320000
[ 0.876558] Bad eraseblock 515 at 0x000004060000
[ 0.942992] Bad eraseblock 620 at 0x000004d80000
[ 0.950027] Bad eraseblock 624 at 0x000004e00000
[ 0.956487] Bad eraseblock 627 at 0x000004e60000
[ 0.962950] Bad eraseblock 630 at 0x000004ec0000
[ 0.968227] Bad eraseblock 631 at 0x000004ee0000
[ 0.974098] Bad eraseblock 633 at 0x000004f20000
[ 0.985251] Bad eraseblock 644 at 0x000005080000
[ 0.991116] Bad eraseblock 646 at 0x0000050c0000
[ 0.996394] Bad eraseblock 647 at 0x0000050e0000
[ 1.002849] Bad eraseblock 650 at 0x000005140000
[ 1.008126] Bad eraseblock 651 at 0x000005160000
[ 1.015169] Bad eraseblock 655 at 0x0000051e0000
[ 1.022211] Bad eraseblock 659 at 0x000005260000
[ 1.027484] Bad eraseblock 660 at 0x000005280000
[ 1.032761] Bad eraseblock 661 at 0x0000052a0000
[ 1.078592] Bad eraseblock 731 at 0x000005b60000
[ 1.085645] Bad eraseblock 735 at 0x000005be0000
[ 1.092692] Bad eraseblock 739 at 0x000005c60000
[ 1.124601] random: crng init done
[ 1.226716] Bad eraseblock 959 at 0x0000077e0000
[ 1.231986] Bad eraseblock 960 at 0x000007800000
[ 1.262517] Bad eraseblock 1004 at 0x000007d80000
[ 1.268451] Bad eraseblock 1006 at 0x000007dc0000
[ 1.273808] Bad eraseblock 1007 at 0x000007de0000
[ 1.279741] Bad eraseblock 1009 at 0x000007e20000
[ 1.285097] Bad eraseblock 1010 at 0x000007e40000
[ 1.290443] Bad eraseblock 1011 at 0x000007e60000
[ 1.296961] Bad eraseblock 1014 at 0x000007ec0000
[ 1.303489] Bad eraseblock 1017 at 0x000007f20000
[ 1.308835] Bad eraseblock 1018 at 0x000007f40000
[ 1.314185] Bad eraseblock 1019 at 0x000007f60000
[ 1.319531] Bad eraseblock 1020 at 0x000007f80000
[ 1.325717] Bad eraseblock 1023 at 0x000007fe0000
[ 1.330617] 4 fixed-partitions partitions found on MTD device brcmnand.0
[ 1.337330] Creating 4 MTD partitions on "brcmnand.0":
[ 1.342493] 0x000000000000-0x000000080000 : "boot"
[ 1.347801] 0x000000080000-0x000000180000 : "nvram"
[ 1.353129] 0x000000180000-0x000000400000 : "phicomm"
[ 1.358608] 0x000000400000-0x000008000000 : "firmware"
[ 1.365352] 2 trx partitions found on MTD device firmware
[ 1.370800] Creating 2 MTD partitions on "firmware":
[ 1.375779] 0x00000000001c-0x000000400000 : "linux"
[ 1.381323] 0x000000400000-0x000007c00000 : "ubi"
[ 1.387262] bcm_iproc 18029200.spi: using bspi-mspi mode
[ 1.393665] libphy: iProc MDIO bus: probed
[ 1.397788] iproc-mdio 18003000.mdio: Broadcom iProc MDIO bus at 0x6e6f250a
[ 1.405061] libphy: mdio_mux: probed
[ 1.409251] libphy: Fixed MDIO Bus: probed
[ 1.413452] bgmac_bcma: Broadcom 47xx GBit MAC driver loaded
[ 1.419524] bcma-host-soc 18000000.axi: bus0: Found chip with id 53030, rev 0x00 and package 0x00
[ 1.428499] bcma-host-soc 18000000.axi: bus0: Core 0 found: ChipCommon (manuf 0x4BF, id 0x800, rev 0x2A, class 0x0)
[ 1.439075] bcma-host-soc 18000000.axi: bus0: Core 1 found: Chipcommon B (manuf 0x4BF, id 0x50B, rev 0x05, class 0x0)
[ 1.449816] bcma-host-soc 18000000.axi: bus0: Core 2 found: DMA (manuf 0x4BF, id 0x502, rev 0x04, class 0x0)
[ 1.459795] bcma-host-soc 18000000.axi: bus0: Core 3 found: GBit MAC (manuf 0x4BF, id 0x82D, rev 0x07, class 0x0)
[ 1.470209] bcma-host-soc 18000000.axi: bus0: Core 4 found: GBit MAC (manuf 0x4BF, id 0x82D, rev 0x07, class 0x0)
[ 1.480629] bcma-host-soc 18000000.axi: bus0: Core 5 found: GBit MAC (manuf 0x4BF, id 0x82D, rev 0x07, class 0x0)
[ 1.491045] bcma-host-soc 18000000.axi: bus0: Core 6 found: GBit MAC (manuf 0x4BF, id 0x82D, rev 0x07, class 0x0)
[ 1.501400] bcma-host-soc 18000000.axi: bus0: Core 7 found: PCIe Gen 2 (manuf 0x4BF, id 0x501, rev 0x07, class 0x0)
[ 1.511933] bcma-host-soc 18000000.axi: bus0: Core 8 found: PCIe Gen 2 (manuf 0x4BF, id 0x501, rev 0x07, class 0x0)
[ 1.522475] bcma-host-soc 18000000.axi: bus0: Core 9 found: PCIe Gen 2 (manuf 0x4BF, id 0x501, rev 0x07, class 0x0)
[ 1.533046] bcma-host-soc 18000000.axi: bus0: Core 10 found: ARM Cortex A9 core (ihost) (manuf 0x4BF, id 0x510, rev 0x07, class 0x0)
[ 1.545077] bcma-host-soc 18000000.axi: bus0: Core 11 found: USB 2.0 (manuf 0x4BF, id 0x504, rev 0x07, class 0x0)
[ 1.555462] bcma-host-soc 18000000.axi: bus0: Core 12 found: USB 3.0 (manuf 0x4BF, id 0x505, rev 0x07, class 0x0)
[ 1.565857] bcma-host-soc 18000000.axi: bus0: Core 13 found: SDIO3 (manuf 0x4BF, id 0x503, rev 0x01, class 0x0)
[ 1.576073] bcma-host-soc 18000000.axi: bus0: Core 14 found: I2S (manuf 0x4BF, id 0x834, rev 0x03, class 0x0)
[ 1.586106] bcma-host-soc 18000000.axi: bus0: Core 15 found: ARM Cortex A9 JTAG (manuf 0x4BF, id 0x506, rev 0x01, class 0x0)
[ 1.597449] bcma-host-soc 18000000.axi: bus0: Core 16 found: Denali DDR2/DDR3 memory controller (manuf 0x4BF, id 0x507, rev 0x01, class 0x0)
[ 1.610182] bcma-host-soc 18000000.axi: bus0: Core 17 found: ROM (manuf 0x4BF, id 0x508, rev 0x08, class 0x0)
[ 1.620233] bcma-host-soc 18000000.axi: bus0: Core 18 found: NAND flash controller (manuf 0x4BF, id 0x509, rev 0x01, class 0x0)
[ 1.631840] bcma-host-soc 18000000.axi: bus0: Core 19 found: SPI flash controller (manuf 0x4BF, id 0x50A, rev 0x01, class 0x0)
[ 1.643308] bcma-host-soc 18000000.axi: bus0: Flash type not supported
[ 1.687380] bgmac_bcma bcma0:3: Found PHY addr: 30 (NOREGS)
[ 1.692994] bgmac_bcma bcma0:3: Support for Roboswitch not implemented
[ 1.705420] b53_common: found switch: BCM53012, rev 0
[ 1.711129] bgmac_bcma bcma0:4: Found PHY addr: 0
[ 1.715876] bgmac_bcma bcma0:4: Support for Roboswitch not implemented
[ 1.722422] bgmac_bcma bcma0:4: Invalid MAC addr: 00:00:00:00:00:00
[ 1.728701] bgmac_bcma bcma0:4: Using random MAC: 26:77:af:0c:85:57
[ 1.736225] bgmac_bcma bcma0:5: Found PHY addr: 0
[ 1.740955] bgmac_bcma bcma0:5: Support for Roboswitch not implemented
[ 1.747528] bgmac_bcma bcma0:5: Invalid MAC addr: 00:00:00:00:00:00
[ 1.753826] bgmac_bcma bcma0:5: Using random MAC: 7e:e4:94:c5:06:ec
[ 1.761334] bgmac_bcma bcma0:6: Unsupported core_unit 3
[ 1.766655] bgmac_bcma: probe of bcma0:6 failed with error -524
[ 1.892344] pcie_iproc_bcma bcma0:7: PHY or data link is INACTIVE!
[ 1.898538] pcie_iproc_bcma bcma0:7: no PCIe EP device detected
[ 1.904473] pcie_iproc_bcma bcma0:7: PCIe controller setup failed
[ 2.032340] pcie_iproc_bcma bcma0:8: PHY or data link is INACTIVE!
[ 2.038533] pcie_iproc_bcma bcma0:8: no PCIe EP device detected
[ 2.044468] pcie_iproc_bcma bcma0:8: PCIe controller setup failed
[ 2.172340] pcie_iproc_bcma bcma0:9: PHY or data link is INACTIVE!
[ 2.178537] pcie_iproc_bcma bcma0:9: no PCIe EP device detected
[ 2.184472] pcie_iproc_bcma bcma0:9: PCIe controller setup failed
[ 2.191357] bcm47xx-wdt bcm47xx-wdt.0: BCM47xx Watchdog Timer enabled (30 seconds, Software Timer)
[ 2.200395] bcma-host-soc 18000000.axi: bus0: Bus registered
[ 2.206934] NET: Registered protocol family 10
[ 2.212246] Segment Routing with IPv6
[ 2.216021] NET: Registered protocol family 17
[ 2.220519] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
[ 2.233516] 8021q: 802.1Q VLAN Support v1.8
[ 2.237750] Registering SWP/SWPB emulation handler
[ 2.245830] UBI: auto-attach mtd5
[ 2.249158] ubi0: attaching mtd5
[ 2.846671] ubi0: scanning is finished
[ 2.858463] ubi0 warning: ubi_eba_init: number of bad PEBs (37) is above the expected limit (20), not reserving any PEBs for bad PEB handling, will use available PEBs (if any)
[ 2.874752] ubi0: attached mtd5 (name "ubi", size 120 MiB)
[ 2.880254] ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
[ 2.887151] ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
[ 2.893957] ubi0: VID header offset: 2048 (aligned 2048), data offset: 4096
[ 2.900933] ubi0: good PEBs: 923, bad PEBs: 37, corrupted PEBs: 0
[ 2.907038] ubi0: user volume: 2, internal volumes: 1, max. volumes count: 128
[ 2.914280] ubi0: max/mean erase counter: 2/1, WL threshold: 4096, image sequence number: 1630448408
[ 2.923436] ubi0: available PEBs: 0, total reserved PEBs: 923, PEBs reserved for bad PEB handling: 0
[ 2.932620] ubi0: background thread "ubi_bgt0d" started, PID 463
[ 2.939466] block ubiblock0_0: created from ubi0:0(rootfs)
[ 2.944995] ubiblock: device ubiblock0_0 (rootfs) set to be root filesystem
[ 2.955702] VFS: Mounted root (squashfs filesystem) readonly on device 254:0.
[ 2.963641] Freeing unused kernel memory: 1024K
[ 2.990209] Run /sbin/init as init process
[ 3.209744] init: Console is alive
[ 3.213362] init: - watchdog -
[ 5.095279] kmodloader: loading kernel modules from /etc/modules-boot.d/*
[ 5.171547] usbcore: registered new interface driver usbfs
[ 5.177130] usbcore: registered new interface driver hub
[ 5.182522] usbcore: registered new device driver usb
[ 5.190358] raid6: using algorithm int32x8 gen() 0 MB/s
[ 5.195594] raid6: .... xor() 0 MB/s, rmw enabled
[ 5.200360] raid6: using intx1 recovery algorithm
[ 5.205730] xor: measuring software checksum speed
[ 5.310089] arm4regs : 2181.600 MB/sec
[ 5.410084] 8regs : 1682.000 MB/sec
[ 5.510084] 32regs : 1817.600 MB/sec
[ 5.514274] xor: using function: arm4regs (2181.600 MB/sec)
[ 5.595276] Btrfs loaded, crc32c=crc32c-generic
[ 5.633356] JFS: nTxBlock = 3998, nTxLock = 31986
[ 5.703218] SGI XFS with security attributes, no debug enabled
[ 5.713603] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 5.724682] SCSI subsystem initialized
[ 5.731275] ehci-fsl: Freescale EHCI Host controller driver
[ 5.737983] ehci-platform: EHCI generic platform driver
[ 5.754153] ehci-pci: EHCI PCI platform driver
[ 5.760253] ehci-platform 18021000.usb: EHCI Host Controller
[ 5.765295] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 5.765958] ehci-platform 18021000.usb: new USB bus registered, assigned bus number 1
[ 5.773338] ohci-platform: OHCI generic platform driver
[ 5.780233] ehci-platform 18021000.usb: irq 37, io mem 0x18021000
[ 5.785473] ohci-platform 18022000.usb: Generic Platform OHCI controller
[ 5.798148] ohci-platform 18022000.usb: new USB bus registered, assigned bus number 2
[ 5.806123] ohci-platform 18022000.usb: irq 37, io mem 0x18022000
[ 5.820165] ehci-platform 18021000.usb: USB 2.0 started, EHCI 1.00
[ 5.826804] hub 1-0:1.0: USB hub found
[ 5.830662] hub 1-0:1.0: 2 ports detected
[ 5.886766] hub 2-0:1.0: USB hub found
[ 5.890568] hub 2-0:1.0: 2 ports detected
[ 5.896352] uhci_hcd: USB Universal Host Controller Interface driver
[ 5.903879] ohci-pci: OHCI PCI platform driver
[ 6.022347] xhci-hcd 18023000.usb: xHCI Host Controller
[ 6.027606] xhci-hcd 18023000.usb: new USB bus registered, assigned bus number 3
[ 6.035241] xhci-hcd 18023000.usb: hcc params 0x02501164 hci version 0x100 quirks 0x0000001000010010
[ 6.044435] xhci-hcd 18023000.usb: irq 38, io mem 0x18023000
[ 6.050724] hub 3-0:1.0: USB hub found
[ 6.054585] hub 3-0:1.0: config failed, hub doesn't have any ports! (err -19)
[ 6.061868] xhci-hcd 18023000.usb: xHCI Host Controller
[ 6.067126] xhci-hcd 18023000.usb: new USB bus registered, assigned bus number 4
[ 6.074552] xhci-hcd 18023000.usb: Host supports USB 3.0 SuperSpeed
[ 6.082408] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
[ 6.090887] hub 4-0:1.0: USB hub found
[ 6.094714] hub 4-0:1.0: 1 port detected
[ 6.104660] [PF_RING] Welcome to PF_RING 7.8.0 ($Revision: unknown$)
[ 6.104660] (C) 2004-20 ntop.org
[ 6.114280] LINUX_VERSION_CODE 0005048F
[ 6.118123] [PF_RING] Min # ring slots 4096
[ 6.122308] [PF_RING] Slot version 18
[ 6.126334] [PF_RING] Capture TX Yes [RX+TX]
[ 6.131134] [PF_RING] IP Defragment No
[ 6.135188] NET: Registered protocol family 27
[ 6.139689] [PF_RING] pf_ring initialized correctly
[ 6.146993] usbcore: registered new interface driver usb-storage
[ 6.154443] usbcore: registered new interface driver uas
[ 6.160102] kmodloader: done loading kernel modules from /etc/modules-boot.d/*
[ 6.170284] init: - preinit -
Press the [1], [2], [3] or [4] key and hit [enter] to select the debug level
rm: can't remove '/tmp/tmp.BJPhlh': No such file or directory
[ 8.653163] mount_root: loading kmods from internal overlay
[ 8.685604] kmodloader: loading kernel modules from //etc/modules-boot.d/*
[ 8.694914] kmodloader: done loading kernel modules from //etc/modules-boot.d/*
[ 8.798282] UBIFS (ubi0:1): Mounting in unauthenticated mode
[ 8.804182] UBIFS (ubi0:1): background thread "ubifs_bgt0_1" started, PID 670
[ 8.852225] UBIFS (ubi0:1): recovery needed
[ 8.973044] UBIFS (ubi0:1): recovery completed
[ 8.977575] UBIFS (ubi0:1): UBIFS: mounted UBI device 0, volume 1, name "rootfs_data"
[ 8.985441] UBIFS (ubi0:1): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
[ 8.995389] UBIFS (ubi0:1): FS size: 105263104 bytes (100 MiB, 829 LEBs), journal size 5332992 bytes (5 MiB, 42 LEBs)
[ 9.006021] UBIFS (ubi0:1): reserved for root: 4952683 bytes (4836 KiB)
[ 9.012656] UBIFS (ubi0:1): media format: w5/r0 (latest is w5/r0), UUID 7A592D92-052A-4B25-A484-0A226D8A512D, small LPT model
[ 9.026036] block: attempting to load /tmp/ubifs_cfg/upper/etc/config/fstab
[ 9.039255] block: extroot: not configured
[ 9.043544] UBIFS (ubi0:1): un-mount UBI device 0
[ 9.048273] UBIFS (ubi0:1): background thread "ubifs_bgt0_1" stops
[ 9.057906] UBIFS (ubi0:1): Mounting in unauthenticated mode
[ 9.063712] UBIFS (ubi0:1): background thread "ubifs_bgt0_1" started, PID 673
[ 9.156593] UBIFS (ubi0:1): UBIFS: mounted UBI device 0, volume 1, name "rootfs_data"
[ 9.164465] UBIFS (ubi0:1): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
[ 9.174408] UBIFS (ubi0:1): FS size: 105263104 bytes (100 MiB, 829 LEBs), journal size 5332992 bytes (5 MiB, 42 LEBs)
[ 9.185041] UBIFS (ubi0:1): reserved for root: 4952683 bytes (4836 KiB)
[ 9.191673] UBIFS (ubi0:1): media format: w5/r0 (latest is w5/r0), UUID 7A592D92-052A-4B25-A484-0A226D8A512D, small LPT model
[ 9.273710] block: attempting to load /tmp/ubifs_cfg/upper/etc/config/fstab
[ 9.286311] block: extroot: not configured
[ 9.292630] mount_root: switching to ubifs overlay
[ 9.310162] urandom-seed: Seeding with /etc/urandom.seed
[ 10.174851] procd: - early -
[ 10.177795] procd: - watchdog -
[ 10.710195] procd: - watchdog -
[ 10.715044] procd: - ubus -
[ 10.772826] procd: - init -
Please press Enter to activate this console. |
|