dir868L，ttl一直停留在Committing NVRAM...

nxh1129

真是奇葩，升级官方固件也会出问题，固件升级完之后，正常，刷入语言包之后，挂了，电源灯黄色常亮
折腾一番焊接了ttl针，一直是下边的样子，这是怎么了？

Corrupt NVRAM found, trying embedded NVRAM next.


CFE version 6.30.163.18 (r377098) based on BBP 1.0.37 for BCM947XX (32bit,SP,)
Build Date: Fri Mar  8 14:09:35 CST 2013 (tom_lin@RangeRover)
Copyright (C) 2000-2008 Broadcom Corporation.

Init Arena
Init Devs.
Boot partition size = 262144(0x40000)
Found a AMD NAND flash:
Total size:  128MB
Block size:  128KB
Page Size:   2048B
OOB Size:    64B
Sector size: 512B
Spare size:  16B
ECC level:   8-bit
Device ID: 0x01 0xf1 0x00 0x1d 0x01
DDR Clock: 333 MHz
Info: DDR frequency set from clkfreq=800,*533*
Warning: invalid DDR setting of 533 MHz ignored. DDR frequency will be set to 333 MHz.
et0: Broadcom BCM47XX 10/100/1000 Mbps Ethernet Controller 6.30.163.18 (r377098)
CPU type 0x0: 800MHz
Tot mem: 262144 KBytes

CFE mem:    0x00F00000 - 0x01092CA4 (1649828)
Data:       0x00F5A758 - 0x00F5AC9C (1348)
BSS:        0x00F5ACA8 - 0x00F90CA4 (221180)
Heap:       0x00F90CA4 - 0x01090CA4 (1048576)
Stack:      0x01090CA4 - 0x01092CA4 (8192)
Text:       0x00F00000 - 0x00F4F474 (324724)
Boot:       0x01093000 - 0x010D3000
Reloc:      I:00000000 - D:00000000

Board Name: WRGAC02
SVN revision: 810
Committing NVRAM...
SVN revision: 810
Decompressing...done
Found a ST compatible (Marconix) serial flash with 32 64KB blocks; total size 2MB
Corrupt NVRAM found, trying embedded NVRAM next.


CFE version 6.30.163.18 (r377098) based on BBP 1.0.37 for BCM947XX (32bit,SP,)
Build Date: Fri Mar  8 14:09:35 CST 2013 (tom_lin@RangeRover)
Copyright (C) 2000-2008 Broadcom Corporation.

Init Arena
Init Devs.
Boot partition size = 262144(0x40000)
Found a AMD NAND flash:
Total size:  128MB
Block size:  128KB
Page Size:   2048B
OOB Size:    64B
Sector size: 512B
Spare size:  16B
ECC level:   8-bit
Device ID: 0x01 0xf1 0x00 0x1d 0x01
DDR Clock: 333 MHz
Info: DDR frequency set from clkfreq=800,*533*
Warning: invalid DDR setting of 533 MHz ignored. DDR frequency will be set to 333 MHz.
et0: Broadcom BCM47XX 10/100/1000 Mbps Ethernet Controller 6.30.163.18 (r377098)
CPU type 0x0: 800MHz
Tot mem: 262144 KBytes

CFE mem:    0x00F00000 - 0x01092CA4 (1649828)
Data:       0x00F5A758 - 0x00F5AC9C (1348)
BSS:        0x00F5ACA8 - 0x00F90CA4 (221180)
Heap:       0x00F90CA4 - 0x01090CA4 (1048576)
Stack:      0x01090CA4 - 0x01092CA4 (8192)
Text:       0x00F00000 - 0x00F4F474 (324724)
Boot:       0x01093000 - 0x010D3000
Reloc:      I:00000000 - D:00000000

Board Name: WRGAC02
SVN revision: 810
Committing NVRAM...

nxh1129

哪位大神指点一下啊，是cfe挂了吗？

nxh1129

按Ctrl+c没有用

nxh1129

如果路由器的Rx针没有焊好，会不会出现有接受信息，按Ctrl+C，cfe不停的症状？

nxh1129

原因可能找到了，把路由器的Rx针拔掉，还有接受信息，可能走了弯路

zhjook

你的内存频率不对吧，提示无效内存频率533

nxh1129

zhjook 发表于 2017-4-20 11:47
你的内存频率不对吧，提示无效内存频率533

不懂啊，什么问题？还没有解决，做交换机正常

zhjook

nxh1129 发表于 2017-4-20 15:26
不懂啊，什么问题？还没有解决，做交换机正常

好像是cfe 参数错误，你清空nvram 试试，不行就得换刷一遍原始cfe

nxh1129

zhjook 发表于 2017-4-20 19:38
好像是cfe 参数错误，你清空nvram 试试，不行就得换刷一遍原始cfe

Ctrl+C 不会中断啊，不会停

nxh1129

已经解决，2M的flash芯片损坏，买的新的芯片，编程器刷入换上，搞定

孤星翼

接线方式求告知

nxh1129

孤星翼 发表于 2019-3-1 16:48
接线方式求告知

https://www.right.com.cn/forum/thread-197149-1-1.html

那么问题来了

k可以的。。。。。。。