在hanwckf源码中添加chongshengB的插件及KVR成功!

yuy*** · 发表于 2021-8-24 17:28

keke1023 发表于 2021-8-24 16:52
你可以aclocal --version和automake --version看看有没有，有的话版本对不对就知道了，我的是都有都是1.1 ...

我都确认过版本了···我虽然菜但是还不至于看不懂这些这么简单的报错
怀疑是残留文件的原因把pcre-8.43这个文件夹扬了再跑了下./clear_tree WSL下libpcre好像正常编译了然后跳出个新的错误···还是aclocal这鬼玩意我再把这libs里面这些已经解压的tarball全扬了算了

make[3]: Leaving directory '/opt/rt-n56u/trunk/libs/libconfuse'
make -j8 -C confuse-3.3
make[3]: Entering directory '/opt/rt-n56u/trunk/libs/libconfuse/confuse-3.3'
CDPATH="${ZSH_VERSION+.}:" && cd . && /bin/bash /opt/rt-n56u/trunk/libs/libconfuse/confuse-3.3/support/missing aclocal-1.16 -I m4
/opt/rt-n56u/trunk/libs/libconfuse/confuse-3.3/support/missing: line 81: aclocal-1.16: command not found
WARNING: 'aclocal-1.16' is missing on your system.
You should only need it if you modified 'acinclude.m4' or
'configure.ac' or m4 files included by 'configure.ac'.
The 'aclocal' program is part of the GNU Automake package:
<https://www.gnu.org/software/automake>
It also requires GNU Autoconf, GNU m4 and Perl in order to run:
<https://www.gnu.org/software/autoconf>
<https://www.gnu.org/software/m4/>
<https://www.perl.org/>
Makefile:440: recipe for target 'aclocal.m4' failed
make[3]: *** [aclocal.m4] Error 127
make[3]: Leaving directory '/opt/rt-n56u/trunk/libs/libconfuse/confuse-3.3'
Makefile:5: recipe for target 'all' failed
make[2]: *** [all] Error 2
make[2]: Leaving directory '/opt/rt-n56u/trunk/libs/libconfuse'
Makefile:227: recipe for target 'all' failed
make[1]: *** [all] Error 2
make[1]: Leaving directory '/opt/rt-n56u/trunk/libs'
Makefile:202: recipe for target 'libs_only' failed
make: *** [libs_only] Error 2

复制代码

keke*** · 发表于 2021-8-24 17:48

yuyuyg 发表于 2021-8-24 17:28
我都确认过版本了···我虽然菜但是还不至于看不懂这些这么简单的报错
怀疑是残留文件的原因把pcre-8 ...

这个情况还挺难避免的…我是clear tree以后上传的，已经尽可能把修改的东西都删了，可能还是有些残留的有影响，我在我自己本机也发现不了问题，只能你们测试了才知道了，如果是残留文件问题，我就去删了他们解压后的文件夹

yuy*** · 发表于 2021-8-24 17:50

yuyuyg 发表于 2021-8-24 17:28
我都确认过版本了···我虽然菜但是还不至于看不懂这些这么简单的报错
怀疑是残留文件的原因把pcre-8 ...

扬了confuse-3.3源码文件夹后强行继续log显示confuse-3.3成功编译了然后下一个报错libmnl 和楼上那位一样这次缺少1.14了

这次我不强行继续了直接把所有libs里面有tar的文件夹里已经解压的文件夹全扬了再来全新重新编译一次

make[3]: Leaving directory '/opt/rt-n56u/trunk/libs/libmnl'
make -C libmnl-1.0.4
make[3]: Entering directory '/opt/rt-n56u/trunk/libs/libmnl/libmnl-1.0.4'
CDPATH="${ZSH_VERSION+.}:" && cd . && /bin/bash /opt/rt-n56u/trunk/libs/libmnl/libmnl-1.0.4/build-aux/missing aclocal-1.14 -I m4
/opt/rt-n56u/trunk/libs/libmnl/libmnl-1.0.4/build-aux/missing: line 81: aclocal-1.14: command not found
WARNING: 'aclocal-1.14' is missing on your system.
You should only need it if you modified 'acinclude.m4' or
'configure.ac' or m4 files included by 'configure.ac'.
The 'aclocal' program is part of the GNU Automake package:
<http://www.gnu.org/software/automake>
It also requires GNU Autoconf, GNU m4 and Perl in order to run:
<http://www.gnu.org/software/autoconf>
<http://www.gnu.org/software/m4/>
<http://www.perl.org/>
Makefile:417: recipe for target 'aclocal.m4' failed
make[3]: *** [aclocal.m4] Error 127
make[3]: Leaving directory '/opt/rt-n56u/trunk/libs/libmnl/libmnl-1.0.4'
Makefile:5: recipe for target 'all' failed
make[2]: *** [all] Error 2
make[2]: Leaving directory '/opt/rt-n56u/trunk/libs/libmnl'
Makefile:227: recipe for target 'all' failed
make[1]: *** [all] Error 2
make[1]: Leaving directory '/opt/rt-n56u/trunk/libs'
Makefile:202: recipe for target 'libs_only' failed
make: *** [libs_only] Error 2

复制代码

yuy*** · 发表于 2021-8-24 19:18

吃个饭回来一看我···（儒雅随和

make[3]: Leaving directory '/opt/rt-n56u/trunk/user/htop'
make -j8 -C htop-3.0.2
make[3]: Entering directory '/opt/rt-n56u/trunk/user/htop/htop-3.0.2'
CDPATH="${ZSH_VERSION+.}:" && cd . && /bin/bash /opt/rt-n56u/trunk/user/htop/htop-3.0.2/missing aclocal-1.16 -I m4
/opt/rt-n56u/trunk/user/htop/htop-3.0.2/missing: line 81: aclocal-1.16: command not found
WARNING: 'aclocal-1.16' is missing on your system.
You should only need it if you modified 'acinclude.m4' or
'configure.ac' or m4 files included by 'configure.ac'.
The 'aclocal' program is part of the GNU Automake package:
<https://www.gnu.org/software/automake>
It also requires GNU Autoconf, GNU m4 and Perl in order to run:
<https://www.gnu.org/software/autoconf>
<https://www.gnu.org/software/m4/>
<https://www.perl.org/>
Makefile:728: recipe for target 'aclocal.m4' failed
make[3]: *** [aclocal.m4] Error 127
make[3]: Leaving directory '/opt/rt-n56u/trunk/user/htop/htop-3.0.2'
Makefile:6: recipe for target 'all' failed
make[2]: *** [all] Error 2
make[2]: Leaving directory '/opt/rt-n56u/trunk/user/htop'
Makefile:240: recipe for target 'all' failed
make[1]: *** [all] Error 2
make[1]: Leaving directory '/opt/rt-n56u/trunk/user'
Makefile:202: recipe for target 'user_only' failed
make: *** [user_only] Error 2

复制代码

yuy*** · 发表于 2021-8-24 19:20

老兄你把库里的已经解压了的tarball文件夹都删了吧我怕了

keke*** · 发表于 2021-8-24 20:04

yuyuyg 发表于 2021-8-24 19:20
老兄你把库里的已经解压了的tarball文件夹都删了吧我怕了

我想想看怎么做更保险，我用一个padavanonly的clone没编译过的来修改吧

keke*** · 发表于 2021-8-24 22:07

yuyuyg 发表于 2021-8-24 19:20
老兄你把库里的已经解压了的tarball文件夹都删了吧我怕了

我直接用他原版的libs文件夹替换了，这下应该没问题了，其他看起来有编译痕迹的都修正了一下

daji*** · 发表于 2021-8-24 22:32

楼主有没有编译过音乐解锁？

keke*** · 发表于 2021-8-24 22:41

dajie125 发表于 2021-8-24 22:32
楼主有没有编译过音乐解锁？

没有，从来没用过这个功能呢，不过这里user文件夹基本上完全来自chongshengB，所以他原版固件能实现这个的话，现在的才能实现，我不确定原版的能不能

yuy*** · 发表于 2021-8-24 22:49

keke1023 发表于 2021-8-24 22:07
我直接用他原版的libs文件夹替换了，这下应该没问题了，其他看起来有编译痕迹的都修正了一下

我再来试试

yuy*** · 发表于 2021-8-24 23:05

keke1023 发表于 2021-8-24 22:07
我直接用他原版的libs文件夹替换了，这下应该没问题了，其他看起来有编译痕迹的都修正了一下

上面出错的htop没动啊我编译看看估计还会出错··

keke*** · 发表于 2021-8-24 23:15

yuyuyg 发表于 2021-8-24 23:05
上面出错的htop没动啊我编译看看估计还会出错··

user里的东西应该是会根据makefile在clean的时候清除掉config done标记和部分或者全部编译内容的，错误原因可能还是来自libs

yuy*** · 发表于 2021-8-24 23:57

keke1023 发表于 2021-8-24 23:15
user里的东西应该是会根据makefile在clean的时候清除掉config done标记和部分或者全部编译内容的，错误原 ...

Just like before.
It's yesterday once more.

make[3]: Leaving directory '/opt/rt-n56u/trunk/user/htop'
make -j8 -C htop-3.0.2
make[3]: Entering directory '/opt/rt-n56u/trunk/user/htop/htop-3.0.2'
CDPATH="${ZSH_VERSION+.}:" && cd . && /bin/bash /opt/rt-n56u/trunk/user/htop/htop-3.0.2/missing aclocal-1.16 -I m4
/opt/rt-n56u/trunk/user/htop/htop-3.0.2/missing: line 81: aclocal-1.16: command not found
WARNING: 'aclocal-1.16' is missing on your system.
You should only need it if you modified 'acinclude.m4' or
'configure.ac' or m4 files included by 'configure.ac'.
The 'aclocal' program is part of the GNU Automake package:
<https://www.gnu.org/software/automake>
It also requires GNU Autoconf, GNU m4 and Perl in order to run:
<https://www.gnu.org/software/autoconf>
<https://www.gnu.org/software/m4/>
<https://www.perl.org/>
Makefile:728: recipe for target 'aclocal.m4' failed
make[3]: *** [aclocal.m4] Error 127
make[3]: Leaving directory '/opt/rt-n56u/trunk/user/htop/htop-3.0.2'
Makefile:6: recipe for target 'all' failed
make[2]: *** [all] Error 2
make[2]: Leaving directory '/opt/rt-n56u/trunk/user/htop'
Makefile:240: recipe for target 'all' failed
make[1]: *** [all] Error 2
make[1]: Leaving directory '/opt/rt-n56u/trunk/user'
Makefile:202: recipe for target 'user_only' failed
make: *** [user_only] Error 2

复制代码

yuy*** · 发表于 2021-8-25 00:20

把htop文件夹删掉后继续编译终于出现出来个不是aclocal的报错了

make[3]: Leaving directory '/opt/rt-n56u/trunk/user/socat/socat-1.7.3.3'
make[2]: Leaving directory '/opt/rt-n56u/trunk/user/socat'
make[2]: Entering directory '/opt/rt-n56u/trunk/user/samba36'
( if [ -f ./config_done ]; then \
echo "the same configuration"; \
else \
make configure && touch config_done; \
fi )
make[3]: Entering directory '/opt/rt-n56u/trunk/user/samba36'
( test -d samba-3.6.25/source3 || { tar -xf samba-3.6.25.tar.gz ; cat patches/*.patch | patch -d samba-3.6.25 -r - -N -p1; }; \
cd samba-3.6.25/source3 && \
ac_cv_lib_attr_getxattr=no \
ac_cv_search_getxattr=no \
ac_cv_file__proc_sys_kernel_core_pattern=no \
libreplace_cv_HAVE_C99_VSNPRINTF=yes \
libreplace_cv_HAVE_GETADDRINFO=yes \
libreplace_cv_HAVE_IFACE_IFCONF=yes \
LINUX_LFS_SUPPORT=yes \
samba_cv_CC_NEGATIVE_ENUM_VALUES=yes \
samba_cv_HAVE_GETTIMEOFDAY_TZ=yes \
samba_cv_HAVE_IFACE_IFCONF=yes \
samba_cv_HAVE_KERNEL_OPLOCKS_LINUX=yes \
samba_cv_HAVE_SECURE_MKSTEMP=yes \
samba_cv_HAVE_WRFILE_KEYTAB=no \
samba_cv_USE_SETREUID=yes \
samba_cv_USE_SETRESUID=yes \
samba_cv_have_setreuid=yes \
samba_cv_have_setresuid=yes \
ac_cv_header_zlib_h=no \
samba_cv_zlib_1_2_3=no \
ac_cv_path_PYTHON="" \
ac_cv_path_PYTHON_CONFIG="" \
PKG_CONFIG_PATH="/opt/rt-n56u/trunk/stage/lib/pkgconfig" \
CPPFLAGS="-DNDEBUG -DSHMEM_SIZE=524288 -Dfcntl=fcntl64 -D_FILE_OFFSET_BITS=64 -D_LARGEFILE_SOURCE=1 -D_LARGEFILE64_SOURCE=1 -D_LARGE_FILES=1" \
CFLAGS="-Os -fomit-frame-pointer -pipe -Dlinux -D__linux__ -Dunix -DEMBED -I/opt/rt-n56u/trunk/stage/include -Wall -Wno-trigraphs -Wno-strict-aliasing -Wno-format-security -fno-tree-slsr -fno-aggressive-loop-optimizations -Wno-pointer-sign -Wno-unused -ffunction-sections -fdata-sections -DMAX_DEBUG_LEVEL="-1"" LDFLAGS="-L/opt/rt-n56u/trunk/stage/lib -Wl,--gc-sections" \
./configure \
--host=mipsel-linux \
--build=x86_64-pc-linux-gnu \
--exec-prefix=/ \
--prefix=/ \
--enable-external-libtdb=no \
--disable-external-libtalloc \
--disable-dmalloc \
--disable-iprint \
--disable-fam \
--disable-krb5developer \
--disable-developer \
--disable-debug \
--disable-avahi \
--disable-cups \
--disable-pie \
--disable-relro \
--disable-static \
--disable-swat \
--disable-shared-libs \
--with-libiconv="/opt/rt-n56u/trunk/stage/lib" \
--with-codepagedir=/usr/share/samba \
--with-configdir=/etc \
--with-included-iniparser \
--with-included-popt=no \
--with-rootsbindir=/sbin \
--with-lockdir=/var/locks \
--with-syslog \
--with-nmbdsocketdir=/var/nmbd \
--with-piddir=/var/run \
--with-privatedir=/etc/samba \
--with-sendfile-support \
--without-acl-support \
--without-cluster-support \
--without-ads \
--without-krb5 \
--without-ldap \
--without-pam \
--without-utmp \
--without-quotas \
--without-sys-quotas \
--without-winbind \
--without-libtdb \
--without-libtalloc \
--without-libnetapi \
--without-libsmbclient \
--without-libsmbsharemodes \
--without-libtevent \
--without-libaddns \
--with-shared-modules=pdb_tdbsam,pdb_wbc_sam,idmap_nss,nss_info_template,auth_winbind,auth_wbc,auth_domain; \
mkdir -p bin; \
)
/bin/sh: 3: ./configure: not found
make[3]: Leaving directory '/opt/rt-n56u/trunk/user/samba36'
MAKEFLAGS="w DYNEXP= PICFLAG= MODULES=" make -j8 -C samba-3.6.25/source3
make[3]: Entering directory '/opt/rt-n56u/trunk/user/samba36/samba-3.6.25/source3'
make[3]: *** No targets specified and no makefile found. Stop.
make[3]: Leaving directory '/opt/rt-n56u/trunk/user/samba36/samba-3.6.25/source3'
Makefile:17: recipe for target 'all' failed
make[2]: *** [all] Error 2
make[2]: Leaving directory '/opt/rt-n56u/trunk/user/samba36'
Makefile:240: recipe for target 'all' failed
make[1]: *** [all] Error 2
make[1]: Leaving directory '/opt/rt-n56u/trunk/user'
Makefile:202: recipe for target 'user_only' failed
make: *** [user_only] Error 2

复制代码

vb1*** · 发表于 2021-8-25 00:21

更新了源码，云编译newifi3通过了，已经pr给大佬了

账号		自动登录	找回密码
密码			立即注册

在hanwckf源码中添加chongshengB的插件及KVR成功!

点评

点评

点评

点评

点评

点评